Title: THREAD_STUCK_IN_DEVICE_DRIVER Post by: Marcink on January 17, 2017, 12:53:47 AM Hi. I need help.
I've build rig of 6GPUs Morherboard MSI Z97 gaming 5 4 xfx rx480 8gb core edition 2 power color rx480 8gb red devil Every 2 minutes that info showing up on windows 10 and it restarting system. When i start mining its all ok. Finding 6 rx480 cards. Working for minute and crashing. Title: Re: THREAD_STUCK_IN_DEVICE_DRIVER Post by: 786sam on January 17, 2017, 12:56:57 AM What psu?
Also try underclocking all your cards before turning miner on as you maybe drawing too much power... Title: Re: THREAD_STUCK_IN_DEVICE_DRIVER Post by: 786sam on January 17, 2017, 01:04:05 AM Also try upgrade to windows 10.... i got this message alot in windows 8
Title: Re: THREAD_STUCK_IN_DEVICE_DRIVER Post by: Marcink on January 17, 2017, 08:26:25 AM I have 2 x 1000w PSU
And win 10. Title: Re: THREAD_STUCK_IN_DEVICE_DRIVER Post by: cc4fun on January 17, 2017, 08:33:24 AM Try increasing the GPUs' core and mem voltages.
Title: Re: THREAD_STUCK_IN_DEVICE_DRIVER Post by: Marcink on January 17, 2017, 08:49:30 AM With which software?
Title: Re: THREAD_STUCK_IN_DEVICE_DRIVER Post by: kilo17 on January 17, 2017, 09:55:13 AM Use DDU to get the drivers off and then reinstall the drivers. That will take care of it 90+% of the time
Title: Re: THREAD_STUCK_IN_DEVICE_DRIVER Post by: toptek on January 17, 2017, 09:59:42 AM reinstall the drivers make sure to delete any profiles with Afterburner , GPU-z in most cases there is nothing wrong with the card it's a bad driver install .
https://msdn.microsoft.com/en-us/library/windows/hardware/ff560350(v=vs.85).aspx Title: Re: THREAD_STUCK_IN_DEVICE_DRIVER Post by: cc4fun on January 17, 2017, 10:48:39 AM With which software? If you're asking about voltage setting software - I recommend WattTool http://www.overclock.net/t/1609782/watttool-a-simple-tool-that-combines-overclocking-with-vrm-monitoring-tweaking-for-rx-400-series (http://www.overclock.net/t/1609782/watttool-a-simple-tool-that-combines-overclocking-with-vrm-monitoring-tweaking-for-rx-400-series)Title: Re: THREAD_STUCK_IN_DEVICE_DRIVER Post by: Marcink on January 17, 2017, 03:37:19 PM But why when i trying to install drivers for 1 card its automatically installing all 6.
Title: Re: THREAD_STUCK_IN_DEVICE_DRIVER Post by: xxcsu on January 17, 2017, 05:01:24 PM USE 1 PSU
Title: Re: THREAD_STUCK_IN_DEVICE_DRIVER Post by: Marcink on January 17, 2017, 06:18:52 PM 1000w is to small for that.
Now im working with 5 card. So far so good. But ive got 7 rx480. Title: Re: THREAD_STUCK_IN_DEVICE_DRIVER Post by: xxcsu on January 17, 2017, 11:22:50 PM 1000w is to small for that. Now im working with 5 card. So far so good. But ive got 7 rx480. i would not run a 6 card rig with a 1000 watts psu , your psu is working close to 95-100% with 6 RX 480 setup without proper tune , bios mod. with a 7 cards setup go for a eVga 1600 watts psu , with 6 cards setup go for a 1200 watts psu , just to stay on the safe side :) |