Title: Mining Rig Help Post by: SkaWeasel on January 17, 2017, 05:06:59 PM Hi, I have my rig like this:
- Asrock Z97 Extreme6 - 5 Sapphire Nitro RX 470 - Intel Core i3 1150 - 4 GB Ram - 60 SSD - EVGA 1300 I have four GPUs connected but when I connect the other one the motherboard throws an A2 error, but only with that port, but the port have no issue if I connect the gpu there and remove the other GPUs. Do you know how to fix this, for me seems to be a problem on BIOS or configuration but Im not sure. Thanks Title: Re: Mining Rig Help Post by: lummujaj on January 17, 2017, 06:13:48 PM look into bios for PCIE settings , and set it to GEN 2
Title: Re: Mining Rig Help Post by: SkaWeasel on January 17, 2017, 09:47:53 PM Thanks for your replay lummujaj!!
I have three setting for PCI-E, should I set the three setting with that value? Title: Re: Mining Rig Help Post by: SkaWeasel on January 18, 2017, 03:49:47 PM Guys also I'm having other issue, as you saw in my first message I have an EVGA 1300 but when I start my rig with 4 GPUs the power of the whole place go off, I've already tried twice and both times I loose the power of the place.
Do you know something about this? Regards Title: Re: Mining Rig Help Post by: m1n1ngP4d4w4n on January 18, 2017, 05:17:41 PM Pulling too much from the wall, if electricity go out, you must be very limited.
Title: Re: Mining Rig Help Post by: lummujaj on January 18, 2017, 05:56:30 PM Thanks for your replay lummujaj!! I have three setting for PCI-E, should I set the three setting with that value? I dont have that mb , on my assrock i only have one pcie settings and ive set to gen2 , othervise i cannot go more than 4gpu Title: Re: Mining Rig Help Post by: SkaWeasel on January 18, 2017, 07:18:46 PM Great, thanks everyone.
Today im going to change the BIOS settings, I'll let you know if that works... About the power, I already fixed, As m1n1ngP4d4w4n comment before, I didn't have enough power for my machine, my technician already fixed the electrical line and now it's working. Title: Re: Mining Rig Help Post by: m1n1ngP4d4w4n on January 18, 2017, 07:54:35 PM Cool :) keep on mining ;)
|