|
Title: antminer s7 red and green led Post by: 1969mets on January 22, 2017, 08:11:34 PM my antminer s7 has stopped working and i cannot access the configuration page. It still makes noise and appears to be hashing but nothing is actually happening. The LED next to the ethernet port are steady red and green. What should i do? Thanks
Title: Re: antminer s7 red and green led Post by: fanatic26 on January 23, 2017, 07:49:22 PM If both lights are frozen in the on state your beagle bone has crashed. Just power cycle the unit and it should come back. If it does not, try a factory reset on the controller.
There is a pinhole with a button inside, press that button down until it beeps and both red and green lights cycle on and off. This will put the miner back to DHCP so you will have to find its IP again and set your pool information back up if you do the full reset. |