So,
I'm tryin to mine on Manjaro linux 0.8.5 with cgminer. And a Sapphire Radeon 6950, with 6970 bios. (So its a full 6970 card)
I get the following errors:
2013-04-15 11:17:11] GPU0: invalid nonce - HW error
[2013-04-15 11:17:57] GPU0: invalid nonce - HW error
[2013-04-15 11:18:21] GPU0: invalid nonce - HW error
[2013-04-15 11:19:09] GPU0: invalid nonce - HW error
[2013-04-15 11:17:16] GPU0: invalid nonce - HW error
[2013-04-15 11:17:50] New block detected on network before longpoll
[2013-04-15 11:18:01] LONGPOLL from pool 0 requested work restart
[2013-04-15 11:18:03] GPU0: invalid nonce - HW error
[2013-04-15 11:22:46] GPU0: invalid nonce - HW error
[2013-04-15 11:22:50] GPU0: invalid nonce - HW error
[2013-04-15 11:22:52] Stratum connection to pool 0 interrupted
[2013-04-15 11:22:53] Stratum from pool 0 requested work restart
[2013-04-15 11:34:49] Started at [2013-04-15 11:17:03]
[2013-04-15 11:34:49] Pool: stratum+tcp://coinotron.com:3333
[2013-04-15 11:34:49] Runtime: 0 hrs : 17 mins : 45 secs
[2013-04-15 11:34:49] Average hashrate: 182.7 Megahash/s
[2013-04-15 11:34:49] Solved blocks: 0
[2013-04-15 11:34:49] Best share difficulty: 0
[2013-04-15 11:34:49] Share submissions: 0
[2013-04-15 11:34:49] Accepted shares: 0
[2013-04-15 11:34:49] Rejected shares: 0
[2013-04-15 11:34:49] Accepted difficulty shares: 0
[2013-04-15 11:34:49] Rejected difficulty shares: 0
[2013-04-15 11:34:49] Hardware errors: 58
[2013-04-15 11:34:49] Utility (accepted shares / min): 0.00/min
[2013-04-15 11:34:49] Work Utility (diff1 shares solved / min): 3.27/min
[2013-04-15 11:34:49] Stale submissions discarded due to new blocks: 0
[2013-04-15 11:34:49] Unable to get work from server occasions: 3
[2013-04-15 11:34:49] Work items generated locally: 165
[2013-04-15 11:34:49] Submitting work remotely delay occasions: 0
[2013-04-15 11:34:49] New blocks detected on network: 3
Both when on BTC, and PPC on the pool.
And my mining results aren't show up at all.
Mining pool: coinotron
Someone might know the truth :)
Try adjusting your Engine and or memory clock speeds from within CGMiner.. press G (for GPU setts) and then <C>hange settings. There you can see recommended setts. so try lowering then slowly going up with memory and engine. Do one change.. let it run then see after 30 secs whats happening.
GLuck, hope helps.
Torn.