|
Title: Can I mod a (16x to 16x riser) into a (1x to a 16x)? Post by: Bitcoinassasin on April 16, 2013, 01:59:04 AM Thanks
Title: Re: Can I mod a (16x to 16x riser) into a (1x to a 16x)? Post by: Peleus on April 16, 2013, 02:56:28 AM Going of this...
http://lifehacker.com/5951156/convert-a-pci+e-x16-video-card-to-fit-a-x1-slot-with-a-diamond-cutting-wheel I'd say yes. Although you're using a riser instead of a card it's the same principle, just less expensive if you stuff up. Title: Re: Can I mod a (16x to 16x riser) into a (1x to a 16x)? Post by: northcape on April 16, 2013, 03:04:39 PM Thanks Yes, I did that just fine. My board wouldn’t detect the card in Slot #2 when Slot #1 had all 16 lanes active. I carefully ripped the unnecessary cables off the 16x riser’s solder pads, made extra sure there was no shortcut anywhere and converted it into a 16x -> 4x riser that way. The second card was detected and the machine mines just fine now. |