|
Title: Output from sensors ? Post by: pccs on April 16, 2013, 02:07:50 AM Just wondering what a few of these sensors are if anyone knows.
I've highlighted the ones in question. Is there a better way to monitor these temps besides the sensors output on Xubuntu 12.04? Quote al@pccs1:~/mining/cgminer$ sensors acpitz-virtual-0 Adapter: Virtual device temp1: +40.0°C (crit = +75.0°C) ? This is always at 40C atk0110-acpi-0 Adapter: ACPI interface Vcore Voltage: +1.14 V (min = +0.85 V, max = +1.60 V) +3.3 Voltage: +3.26 V (min = +3.00 V, max = +3.60 V) +5.0 Voltage: +4.87 V (min = +4.50 V, max = +5.50 V) +12.0 Voltage: +11.97 V (min = +11.20 V, max = +13.20 V) ESATA Voltage: +1.82 V (min = +1.62 V, max = +1.98 V) LAN PHY Voltage: +1.74 V (min = +1.62 V, max = +1.98 V) CPU - NB HT Voltage: +1.26 V (min = +1.00 V, max = +1.60 V) NB CORE Voltage: +1.22 V (min = +0.84 V, max = +1.56 V) NB 2.5V Voltage: +2.59 V (min = +2.25 V, max = +2.75 V) DDR2 TERM Voltage: +0.94 V (min = +0.54 V, max = +1.26 V) SB CORE Voltage: +1.58 V (min = +1.35 V, max = +1.65 V) SB PLL Voltage: +1.62 V (min = +1.05 V, max = +1.95 V) DDR2 Voltage: +1.90 V (min = +1.08 V, max = +2.52 V) CPU FAN Speed: 3515 RPM (min = 0 RPM) CHA_REAR FAN Speed: 2700 RPM (min = 0 RPM) CHA_FRONT FAN Speed: 2149 RPM (min = 0 RPM) OPT1 FAN Speed: 0 RPM (min = 0 RPM) OPT2 FAN Speed: 0 RPM (min = 0 RPM) OPT3 FAN Speed: 1985 RPM (min = 0 RPM) OPT4 FAN Speed: 3245 RPM (min = 0 RPM) OPT5 FAN Speed: 0 RPM (min = 0 RPM) CPU Temperature: +33.0°C (high = +90.0°C, crit = +125.0°C) MB Temperature: +31.0°C (high = +45.0°C, crit = +90.0°C) OPT1 Temperature: +0.0°C (high = +90.0°C, crit = +125.0°C) OPT2 Temperature: +0.0°C (high = +90.0°C, crit = +125.0°C) OPT3 Temperature: +0.0°C (high = +90.0°C, crit = +125.0°C) k8temp-pci-00c3 Adapter: PCI adapter ????????? Ranges between 30 and 42 Core0 Temp: +33.0°C Core1 Temp: +34.0°C |