Title: Hashing rate problem in an antminer s9 Post by: ampereman on February 05, 2017, 01:34:20 PM My miner is with Frequency at default of 600
This photo is taken after 10 days and more from the startup.... https://postimg.org/image/ze1huqhsn/ Basically a blade is often suffering of the problem in the picture. If I reboot it works well for a while and after a period the problem appears again. This is after few hours from the startup https://postimg.org/image/c66lxcbtl/ How is possibile that i have a lot of xxxxxx xxx but the hashing rate is still right? Can you guys help me on this? Title: Re: Hashing rate problem in an antminer s9 Post by: ampereman on February 05, 2017, 03:09:40 PM I tryed to reduce the frequency at 350 but the problem still persist. Any idea?!
Title: Re: Hashing rate problem in an antminer s9 Post by: unholycactus on February 05, 2017, 04:51:07 PM From what I understand your hash rate is still fine?
There shouldn't be any problems or anything or you to fix if the hash rate your pool sees is high enough, Title: Re: Hashing rate problem in an antminer s9 Post by: ampereman on February 05, 2017, 08:35:58 PM The miner shows higher hashrate then the pool. The blade with xxx is not working infact evenif the miner shows 12.93 the pool sai 8.5 TH
|