|
Title: Rx470 bios version need advice Post by: RentGPU on February 10, 2017, 03:32:11 PM I have 3 msi rx 470 4g gamingx but i bought them each on separatly one after another , the first card i bought running at different core voltage than the other two about 1150mv and the other two about 1050mv ..so this card consumes more power than the other two with the same hashrate , how can i configure this card or sync. it to get the same core voltage of the new cards (1050mv) , i would like to do it through afterburner if possible, any advice
Title: Re: Rx470 bios version need advice Post by: BChydro on February 10, 2017, 04:19:41 PM What brand of card is it? If it's sapphire they let you control the voltage pretty easily through Trixx, which is a pretty good utility. If not maybe figure out what brand of memory is has and flash it with new memory straps and core voltage? Or just flash it only lowering the voltage
Title: Re: Rx470 bios version need advice Post by: Millenium Falcon on February 10, 2017, 05:30:22 PM I have one rig with 6 MSI RX 470. They all had different core voltage from 1000mv to 1150 mv. I have set all GPUs to 950mv in amd radeon WattMan settings. Seems it is ok.
Title: Re: Rx470 bios version need advice Post by: RentGPU on February 10, 2017, 05:56:12 PM I have one rig with 6 MSI RX 470. They all had different core voltage from 1000mv to 1150 mv. I have set all GPUs to 950mv in amd radeon WattMan settings. Seems it is ok. Thanks, i will try it as i don't like bios mod :) Title: Re: Rx470 bios version need advice Post by: Millenium Falcon on February 10, 2017, 08:14:41 PM I have one rig with 6 MSI RX 470. They all had different core voltage from 1000mv to 1150 mv. I have set all GPUs to 950mv in amd radeon WattMan settings. Seems it is ok. Thanks, i will try it as i don't like bios mod :) I have made bios mod and 950mv core voltage. If you do not want to make bois mod so I recomend you to set more then 950mv to a maximum core clock ( I have set 950mv to 1100mhz, 940mv to 1000mhz) And do not forget to set power limit in MSI afterburner |