|
Title: New to mining with Antminer S5 - Wanting some help to review my kernel log Post by: Lulinepoxi1 on March 03, 2017, 05:18:12 PM Hello fellow miners!
I was wondering if I may get some help with reviewing my kernel log to make sure everything looks ok. Under my Miner Status everything looks fine. It shows alive, shows all zeros under ASIC which I've read means no errors, and my GH/S shows 1,101.59 with an AVG of 1,157.21 When mining I think my numbers look good for the mining pool URL and worker info etc. But, in Kernel log I'm seeing stuff I don't understand and I'm just hoping I can get some help/guidance as the majority of the time when it's mining I hardly see anything being Accepted. I know this is an AntMiner S5, but I'm just starting off and read that this is a good miner to start off and learn the basic. Below is a link to my screen shot of the miner status page I've tried to insert a link to the picture/screen shot but it keeps getting removed. Please Private message me if you wish to see it. If anyone is willing to help me and review my kernel log to see if everything is correct please let me know and I'll post what you ask for. Thanks, RP Title: Re: New to mining with Antminer S5 - Wanting some help to review my kernel log Post by: QuintLeo on March 04, 2017, 04:34:30 AM Hello fellow miners! I was wondering if I may get some help with reviewing my kernel log to make sure everything looks ok. Under my Miner Status everything looks fine. It shows alive, shows all zeros under ASIC which I've read means no errors, and my GH/S shows 1,101.59 with an AVG of 1,157.21 If your pool-side reported average hashrate is close to that 1.15ish TH, you have nothing to worry about. S5 units tended to be quite reliable, unlike everything Bitmain has released since then (except POSSIBLY the S5+) for mining with. Title: Re: New to mining with Antminer S5 - Wanting some help to review my kernel log Post by: philipma1957 on March 05, 2017, 08:16:30 PM Hello fellow miners! I was wondering if I may get some help with reviewing my kernel log to make sure everything looks ok. Under my Miner Status everything looks fine. It shows alive, shows all zeros under ASIC which I've read means no errors, and my GH/S shows 1,101.59 with an AVG of 1,157.21 When mining I think my numbers look good for the mining pool URL and worker info etc. But, in Kernel log I'm seeing stuff I don't understand and I'm just hoping I can get some help/guidance as the majority of the time when it's mining I hardly see anything being Accepted. I know this is an AntMiner S5, but I'm just starting off and read that this is a good miner to start off and learn the basic. Below is a link to my screen shot of the miner status page I've tried to insert a link to the picture/screen shot but it keeps getting removed. Please Private message me if you wish to see it. If anyone is willing to help me and review my kernel log to see if everything is correct please let me know and I'll post what you ask for. Thanks, RP 1100 gh is fine. kernal log analysis is not needed. |