|
Title: PCI-E 1x riser issues (GPU fan surges and freeze on boot) 6 x 7970 Post by: boozer on April 20, 2013, 08:30:17 AM I have the MSI 890FX-GD70 mobo running Linux (SDK 2.8 and Cat 13.1) and was trying to get 6 x 7970's up and running on it. Well I did get 6 x 7970's up and mining for about an hour when I decided to tweak a single cards engine/memory speed for some better performance. After sever tweaks, the computer froze. Something gone wrong with tweak I thought... I'll just reboot. I rebooted and it froze around where X would start ??? At the same time the GPU on the PCI-E 1x slot fan sounded like it was surging, going from idle to 100% and back... over and over again. I unplugged the 1x slot and the rig booted fine. I also moved the card in the 1x slot to a 16x slot and the card was fine. I tried a different card in the 1x slot and computer froze. So it must be an issue with the 1x slot or riser ::)
It is a powered 1x riser I made myself... I have two other 16x to 16x powered risers I made myself and they still work fine. I would try another 1x riser but I dont have any (they are on order). I have the A1 to B17 pin short in place in the 1x slot. 3 powered risers and 3 unpowered. Anyone had any issues like this? Title: Re: PCI-E 1x riser issues (GPU fan surges and freeze on boot) 6 x 7970 Post by: fran2k on April 25, 2013, 04:18:44 PM Can you share the plans of the DIY risers?
Title: Re: PCI-E 1x riser issues (GPU fan surges and freeze on boot) 6 x 7970 Post by: boozer on April 26, 2013, 02:46:59 AM Can you share the plans of the DIY risers? This thread has links to several resources: https://bitcointalk.org/index.php?topic=171620.0;topicseen Title: Re: PCI-E 1x riser issues (GPU fan surges and freeze on boot) 6 x 7970 Post by: boozer on April 26, 2013, 05:37:37 PM Just FYI: I got my new risers in today and that fixed this problem.
Title: Re: PCI-E 1x riser issues (GPU fan surges and freeze on boot) 6 x 7970 Post by: Wilderness on April 27, 2013, 08:21:56 AM Just FYI: I got my new risers in today and that fixed this problem. Boozer do you use powered risers for all the cards? Just wondering if I would need to get powered risers for the 16x16 risers in a 4 x 7970 rig or just the 1 x 16 Also can not having enough power from running unpowered adapters cause the machine to crash after being able to run for 10+ hours? thannks Title: Re: PCI-E 1x riser issues (GPU fan surges and freeze on boot) 6 x 7970 Post by: rtgornik on April 27, 2013, 02:25:36 PM Just FYI: I got my new risers in today and that fixed this problem. Boozer do you use powered risers for all the cards? Just wondering if I would need to get powered risers for the 16x16 risers in a 4 x 7970 rig or just the 1 x 16 Also can not having enough power from running unpowered adapters cause the machine to crash after being able to run for 10+ hours? thannks I too am wondering this. I cannot seem to be able to run 4 cards for more than ~6 hours at a time. I am now running 2 cards for ~9 hours. I'm keeping my fingers crossed that they will go indefinitely. The only thing I haven't tried is powered risers. I'm looking to create two of these today on my 1x risers where I'll add 1 card at a time with the new powered risers. Title: Re: PCI-E 1x riser issues (GPU fan surges and freeze on boot) 6 x 7970 Post by: Nutnut on April 27, 2013, 02:39:08 PM I'm happily running 4 rigs all with 4x 7970s (16x7970s total) without powered risers and they run for days on end. They only stop when i decide to "fettle". I keep them cool though - all temps under 65 except one that runs hot for some reason with a high of 75. Could it be a heat issue?
Also what PSU are you using as it may be that it's wobbling under the load? Title: Re: PCI-E 1x riser issues (GPU fan surges and freeze on boot) 6 x 7970 Post by: rtgornik on April 27, 2013, 08:59:33 PM I'm happily running 4 rigs all with 4x 7970s (16x7970s total) without powered risers and they run for days on end. They only stop when i decide to "fettle". I keep them cool though - all temps under 65 except one that runs hot for some reason with a high of 75. Could it be a heat issue? Also what PSU are you using as it may be that it's wobbling under the load? I've tried a Seasonic 1250w and a Rosewill Lightning 1300w, with similar results. I have cgminer set to auto-fan with a target temp of 75 degrees. They run at 72 an ~50% fan. I haven't considered that it can be a temp issue. I ran a single card like this for an entire week without issue. Title: Re: PCI-E 1x riser issues (GPU fan surges and freeze on boot) 6 x 7970 Post by: Wilderness on April 27, 2013, 10:35:33 PM yeah I'm running a Corsair 1200 w and the temps are all below 80 for mine
Title: Re: PCI-E 1x riser issues (GPU fan surges and freeze on boot) 6 x 7970 Post by: boozer on April 29, 2013, 05:57:19 PM Boozer do you use powered risers for all the cards? Just wondering if I would need to get powered risers for the 16x16 risers in a 4 x 7970 rig or just the 1 x 16 Also can not having enough power from running unpowered adapters cause the machine to crash after being able to run for 10+ hours? thannks I had 3 rigs with 4 cards running on MSI 890FX motherboards just fine for about a year without powered risers. Now that I'm going to 6 cards, I plan on running 3 on powered risers and 3 powered from the board. Are you overclocked at all? If so, might try to run stock clocks for a day to see if that might be an issue. |