|
Title: Config help Post by: jacoby0419 on April 22, 2013, 05:11:56 PM Ok, so I'm not a total noob- but still relatively.
I initially setup a 7850 rig and am getting ~350mh/s out of it and am happy with that (unless I shouldn't be). His weekend I setup a 1x 7950 rig (these are two separate pc's) and am only getting ~485 mh/s where I think I should be getting 550-600. I'm using guiminer with flags set -v -w256 Any tips on what else I can do? PS- I was using 50btc, but got tired of their site being down half of the time I went there. Using btcguild now. Thanks for the help! Title: Re: Config help Post by: robotrebellion on April 22, 2013, 06:55:27 PM Have you adjusted the GPU Engine/Memory clocks? I would recommend using cgminer (https://bitcointalk.org/index.php?topic=28402.0) rather than guiminer, as it will allow you to adjust these.
Title: Re: Config help Post by: jacoby0419 on April 24, 2013, 02:23:32 AM I have adjusted them, I pushed the memory and processor to max before artifacts would appear. That gave me a bit more- but it seems to max out at 550 and seems to just want to chug along at 48-500.
It's sitting in a PCI-E x16 2.0 slot on a 3.0 C2D system (I had it laying around). It's a HIS card, do you guys think that's what the performance is due to- would I have better luck with a MSI, ASUS, or other better brand? |