Title: How to undervolt RX480 8GB using Wattman Post by: frukissa on March 23, 2017, 03:29:09 AM the title says it all guys, how do i undervolt my rx480s. i am currently running 4 rx480s in one rig with an EVGA 1200P2 SuperNova.
in the coming days ill be getting 2 more RX480 gpus ive been reading in the forum that it is safer to undervolt the cards for it to work well with the PSU im using. does undervolting decrease the performance of the mining power of the card? any help is much appreciated. im looking forward to build more mining rigs, would you rather recommend using 2 psus for one rig of 6 rx480s. If thats the case which psu would you advise me to get. Title: Re: How to undervolt RX480 8GB using Wattman Post by: philipma1957 on March 23, 2017, 04:20:22 AM the title says it all guys, how do i undervolt my rx480s. i am currently running 4 rx480s in one rig with an EVGA 1200P2 SuperNova. in the coming days ill be getting 2 more RX480 gpus ive been reading in the forum that it is safer to undervolt the cards for it to work well with the PSU im using. does undervolting decrease the performance of the mining power of the card? any help is much appreciated. im looking forward to build more mining rigs, would you rather recommend using 2 psus for one rig of 6 rx480s. If thats the case which psu would you advise me to get. First rig . Learn to use simplemining os Watt man is not worth while if you insist on using windows use MSI afterburner. Don't use two psus for your rig Look at my Mining thread here . I have three threads started last April 2017 If you Will take time to read the three threads you will learn a lot Title: Re: How to undervolt RX480 8GB using Wattman Post by: Marvell1 on March 23, 2017, 05:19:29 AM the title says it all guys, how do i undervolt my rx480s. i am currently running 4 rx480s in one rig with an EVGA 1200P2 SuperNova. in the coming days ill be getting 2 more RX480 gpus ive been reading in the forum that it is safer to undervolt the cards for it to work well with the PSU im using. does undervolting decrease the performance of the mining power of the card? any help is much appreciated. im looking forward to build more mining rigs, would you rather recommend using 2 psus for one rig of 6 rx480s. If thats the case which psu would you advise me to get. First rig . Learn to use simplemining os Watt man is not worth while if you insist on using windows use MSI afterburner. Don't use two psus for your rig Look at my Mining thread here . I have three threads started last April 2017 If you Will take time to read the three threads you will learn a lot yeah usually only once but still a pain. Also wattman can be run after the miner has started , for afterburner since it usually autostarts it can mess with the miner stsrtup process if the undervolt is too high. Also wattman can set offsets lower that afterburner Title: Re: How to undervolt RX480 8GB using Wattman Post by: pikachuy on March 23, 2017, 06:39:08 AM I say watttool wins hands down.
http://www.overclock.net/t/1609782/watttool-a-simple-tool-that-combines-overclocking-with-vrm-monitoring-tweaking-for-rx-400-series Title: Re: How to undervolt RX480 8GB using Wattman Post by: Eyedol-X on March 23, 2017, 11:59:24 AM i prefer watman to afterburner since with one command line i can set all the gpus in a rig to thier specific settings and ofsets Curious, I haven't read much into using wattman command line. I assume you are using it in a batch file? Got an example of a multi-gpu command line or set? Title: Re: How to undervolt RX480 8GB using Wattman Post by: frukissa on March 23, 2017, 12:20:32 PM the title says it all guys, how do i undervolt my rx480s. i am currently running 4 rx480s in one rig with an EVGA 1200P2 SuperNova. in the coming days ill be getting 2 more RX480 gpus ive been reading in the forum that it is safer to undervolt the cards for it to work well with the PSU im using. does undervolting decrease the performance of the mining power of the card? any help is much appreciated. im looking forward to build more mining rigs, would you rather recommend using 2 psus for one rig of 6 rx480s. If thats the case which psu would you advise me to get. First rig . Learn to use simplemining os Watt man is not worth while if you insist on using windows use MSI afterburner. Don't use two psus for your rig Look at my Mining thread here . I have three threads started last April 2017 If you Will take time to read the three threads you will learn a lot Thanks for the input, will be testing simplemining os I see u tried to link the thread. Theres no link Thanks Title: Re: How to undervolt RX480 8GB using Wattman Post by: Marvell1 on March 23, 2017, 03:36:22 PM i prefer watman to afterburner since with one command line i can set all the gpus in a rig to thier specific settings and ofsets Curious, I haven't read much into using wattman command line. I assume you are using it in a batch file? Got an example of a multi-gpu command line or set? tool is not the amd wattman bit, that is crap sorry Title: Re: How to undervolt RX480 8GB using Wattman Post by: adaseb on March 23, 2017, 03:45:28 PM I could never get the command line to work properly.
I tried this Quote cd\ cd watttool start WattTool-0.7.exe voffset(0)=-16 ping 8.8.8.8 start WattTool-0.7.exe voffset(6)=-16 ping 8.8.8.8 start WattTool-0.7.exe voffset(12)=-16 ping 8.8.8.8 start WattTool-0.7.exe voffset(18)=-16 ping 8.8.8.8 start WattTool-0.7.exe voffset(24)=-16 ping 8.8.8.8 start WattTool-0.7.exe voffset(30)=-16 pause Doesn't work. Just loads the program Title: Re: How to undervolt RX480 8GB using Wattman Post by: Truthchanter on March 23, 2017, 03:47:40 PM I prefer Win10 over Simple Mining OS. However if your gpu is already bios modded, especially a bios mod with undervolt, then simpleminingos may be prefered as it seems easier to set up and maintain (although may have slightly lower hashrates than windows).
I prefer WattTool over all the other overclocking/undervolting tools for windows. With wattTool you can directly set the voltages or use and offset (or both). I prefer directly setting the voltages. Title: Re: How to undervolt RX480 8GB using Wattman Post by: Munchee on March 23, 2017, 09:00:43 PM What makes you say don't use 2 PSU's?
Is bad for the cards? I am working on a rig that will use 2, 750W PSU's The reason being that I am also running storage on the rig. so need to power 5 HDD's, 5 GPUs + fans Just curious why you say no 2 PSU, Title: Re: How to undervolt RX480 8GB using Wattman Post by: philipma1957 on March 23, 2017, 09:08:41 PM What makes you say don't use 2 PSU's? Is bad for the cards? I am working on a rig that will use 2, 750W PSU's The reason being that I am also running storage on the rig. so need to power 5 HDD's, 5 GPUs + fans Just curious why you say no 2 PSU, more complex and prone to bad wiring causing a short. I am looking at it from the viewpoint of running many rigs not one. https://bitcointalk.org/index.php?topic=1799555.msg18301758#msg18301758 Title: Re: How to undervolt RX480 8GB using Wattman Post by: Marvell1 on March 23, 2017, 11:12:09 PM I could never get the command line to work properly. I tried this Quote cd\ cd watttool start WattTool-0.7.exe voffset(0)=-16 ping 8.8.8.8 start WattTool-0.7.exe voffset(6)=-16 ping 8.8.8.8 start WattTool-0.7.exe voffset(12)=-16 ping 8.8.8.8 start WattTool-0.7.exe voffset(18)=-16 ping 8.8.8.8 start WattTool-0.7.exe voffset(24)=-16 ping 8.8.8.8 start WattTool-0.7.exe voffset(30)=-16 pause Doesn't work. Just loads the program that looks wrong to me i create multuplie empty profiles first then set them the way a want , save them then i run the tool Code: start WattTool-0.91.exe profile1.ini profile2.ini profile3.ini profile4.ini profile5.ini profile6.ini sample profile Code: [General] Title: Re: How to undervolt RX480 8GB using Wattman Post by: Marvell1 on March 23, 2017, 11:13:36 PM one problem i found is some of the newer RX cards with elphida or samsung memeory cant have thier offsets adjusted in wattool
you have to use the latest version of afterburner , really anoying i wish the dev would fix Title: Re: How to undervolt RX480 8GB using Wattman Post by: frukissa on March 24, 2017, 12:33:05 AM I could never get the command line to work properly. I tried this Quote cd\ cd watttool start WattTool-0.7.exe voffset(0)=-16 ping 8.8.8.8 start WattTool-0.7.exe voffset(6)=-16 ping 8.8.8.8 start WattTool-0.7.exe voffset(12)=-16 ping 8.8.8.8 start WattTool-0.7.exe voffset(18)=-16 ping 8.8.8.8 start WattTool-0.7.exe voffset(24)=-16 ping 8.8.8.8 start WattTool-0.7.exe voffset(30)=-16 pause Doesn't work. Just loads the program that looks wrong to me i create multuplie empty profiles first then set them the way a want , save them then i run the tool Code: start WattTool-0.91.exe profile1.ini profile2.ini profile3.ini profile4.ini profile5.ini profile6.ini sample profile Code: [General] Marvell, what values would you recommend me to use for a rig running 6 Rx480 8GB ( 3 asus strixx and 3 msi ) on a Evga 1200w P2, PSU. i have downloaded Wattool it looks very simple to use. thanks for the input guys im learning everyday. Title: Re: How to undervolt RX480 8GB using Wattman Post by: Marvell1 on March 24, 2017, 12:56:17 AM I could never get the command line to work properly. I tried this Quote cd\ cd watttool start WattTool-0.7.exe voffset(0)=-16 ping 8.8.8.8 start WattTool-0.7.exe voffset(6)=-16 ping 8.8.8.8 start WattTool-0.7.exe voffset(12)=-16 ping 8.8.8.8 start WattTool-0.7.exe voffset(18)=-16 ping 8.8.8.8 start WattTool-0.7.exe voffset(24)=-16 ping 8.8.8.8 start WattTool-0.7.exe voffset(30)=-16 pause Doesn't work. Just loads the program that looks wrong to me i create multuplie empty profiles first then set them the way a want , save them then i run the tool Code: start WattTool-0.91.exe profile1.ini profile2.ini profile3.ini profile4.ini profile5.ini profile6.ini sample profile Code: [General] Marvell, what values would you recommend me to use for a rig running 6 Rx480 8GB ( 3 asus strixx and 3 msi ) on a Evga 1200w P2, PSU. i have downloaded Wattool it looks very simple to use. thanks for the input guys im learning everyday. all brands are diff you have to open the card in the tool and tweak it youself and see whats stable. I dont have those cards |