|
Title: .[XFX vs PowerColor (RedDevil&RedDragon) OC VS Shappire Nitro] 470 4G! Post by: centurionMiner on April 30, 2017, 01:22:50 AM HERE WE ARE MAN ;D
What the best version for mining (eth+nicehash) What is the card that have the best Power/Watt ratio between these 4 model? Assume the price are the same Title: Re: .[XFX vs PowerColor (RedDevil&RedDragon) OC VS Shappire Nitro] 470 4G! Post by: cryptominer420 on April 30, 2017, 05:01:31 AM I returned all my XFX RX 470 4GB cards as they were dropping like flies However I have not had a single powercolor card fail.
Title: Re: .[XFX vs PowerColor (RedDevil&RedDragon) OC VS Shappire Nitro] 470 4G! Post by: centurionMiner on April 30, 2017, 01:13:35 PM I returned all my XFX RX 470 4GB cards as they were dropping like flies However I have not had a single powercolor card fail. So you don't advise that card? I'm going to buy these day if I have a good response by some master miner :D About power color. What model is better ? I can buy the Red Devil or Red Dragon or all of them. Need start with 2 GPU Title: Re: .[XFX vs PowerColor (RedDevil&RedDragon) OC VS Shappire Nitro] 470 4G! Post by: cryptominer420 on April 30, 2017, 02:19:07 PM I have both Red Devil and Red Dragon's all are 470 4GB cards
From my experience the Red Devil cards do not Undervolt very well and run hotter than the Red Dragon cards. Example (All Bios Modded Cards): Red Devil Samsung Memory (4 card Rig) Core: 1150MHZ Mem: 2010MHZ Voltage: 980mv Temps: 74 °C|69 °C|77 °C|72 °C| FANS: 97 %|90 %|99 %|100 %| Rig Speeds (Dual Mining) Ethereum: 118MH/s Decred: 2161MH/s Kill-A-Watt Power Usage: 780W for the Rig Same Configuration / Setup the same all the way down to the same room / but Red Dragon Samsung Memory cards (4 card Rig) Core: 1150MHZ Mem: 2010MHZ Voltage: 920mv Temps: 59 °C|62 °C|65 °C|68 °C| FANS: 78 %|98 %|97 %|100 %| Rig Speeds (Dual Mining) Ethereum: 121MH/s Decred: 2421MH/s Kill-A-Watt Power Usage: 720W for the Rig Title: Re: .[XFX vs PowerColor (RedDevil&RedDragon) OC VS Shappire Nitro] 470 4G! Post by: centurionMiner on April 30, 2017, 03:45:10 PM I have both Red Devil and Red Dragon's all are 470 4GB cards From my experience the Red Devil cards do not Undervolt very well and run hotter than the Red Dragon cards. Example (All Bios Modded Cards): Red Devil Samsung Memory (4 card Rig) Core: 1150MHZ Mem: 2010MHZ Voltage: 980mv Temps: 74 °C|69 °C|77 °C|72 °C| FANS: 97 %|90 %|99 %|100 %| Rig Speeds (Dual Mining) Ethereum: 118MH/s Decred: 2161MH/s Kill-A-Watt Power Usage: 780W for the Rig Same Configuration / Setup the same all the way down to the same room / but Red Dragon Samsung Memory cards (4 card Rig) Core: 1150MHZ Mem: 2010MHZ Voltage: 920mv Temps: 59 °C|62 °C|65 °C|68 °C| FANS: 78 %|98 %|97 %|100 %| Rig Speeds (Dual Mining) Ethereum: 121MH/s Decred: 2421MH/s Kill-A-Watt Power Usage: 720W for the Rig uhuhuh. So can't decide between nitro and RedDragon Title: Re: .[XFX vs PowerColor (RedDevil&RedDragon) OC VS Shappire Nitro] 470 4G! Post by: cryptominer420 on April 30, 2017, 04:21:44 PM Go nitro + or PowerColor I have heard a ton of bad things about the non + cards.
|