Title: S9 - 13.5t hash rate GH/S(RT) showing is less Post by: piscess16 on May 08, 2017, 04:46:06 PM The problem is 7/5 morning i have receive the bitcoin is lower than before, then i have checking my S9 miner, i have found the problem is 3 hash board, at center hash board the GH/S(RT) didnt show out, but for the ASIC status still is ok the LED is on.
but at the miner pool, just showing from 6/5 6pm staring just hashing 8.5T not is 13.5T. then i have try to upgrade the FW to latest version + reset the miner, but the problem still is same. problem screen shoot - http://imgur.com/a/dslRX GH/S(RT) - 8.5T but GH/S(avg) still is 13.5T then i still checking is what the problem, then i at kennel log found the this error found the error screen shoot - http://imgur.com/a/Zwg2H so i want to asking now is the hashboard error or is IO board error ? ------------------ then on the next day, until just now 6pm i have moving my S9 miner going to the new place. then i have checking the antpool, but from the ytd i have mixing 2 miner 12.5T + 13.5T(problem s9) screen shoot for the ytd miner hash rate 26T - http://imgur.com/a/0yqe0 and just now 6pm 13.5T(problem s9) screen shoot hash rate look is still 13.5t - http://imgur.com/a/IBNfq ----------------- so now the problem is the miner problem or just is the bug only ? |