Title: Miner crashing... GPU3 0 MH/s... PC reboots. Post by: dragonmike on May 13, 2017, 07:09:09 PM Got two rigs powering 7 GPUs each on MSI Z170A Gaming Pro Carbon's.
The first one runs flawlessly. The second is giving me troubles: When starting Claymore, GPU3 is showing 0 MH/s. 30 seconds later, the PC crashes and reboots if I'm lucky. What do you think? Gpu faulty? Riser? PSU? How can I pinpoint which GPU it is from its numbering by Claymore?... Title: Re: Miner crashing... GPU3 0 MH/s... PC reboots. Post by: Lumada on May 13, 2017, 07:11:50 PM You can enable the -di command and test the gpu one by one.
Title: Re: Miner crashing... GPU3 0 MH/s... PC reboots. Post by: dragonmike on May 13, 2017, 08:04:25 PM And will that tell me which physical GPU that is in my rig, i.e. Which pci-e slot?
Title: Re: Miner crashing... GPU3 0 MH/s... PC reboots. Post by: sonerbo on May 13, 2017, 09:32:27 PM Got two rigs powering 7 GPUs each on MSI Z170A Gaming Pro Carbon's. The first one runs flawlessly. The second is giving me troubles: When starting Claymore, GPU3 is showing 0 MH/s. 30 seconds later, the PC crashes and reboots if I'm lucky. What do you think? Gpu faulty? Riser? PSU? How can I pinpoint which GPU it is from its numbering by Claymore?... you can use 0,1,2 ... number keys to disable a gpu. after a while the closed gpu will be cooller and fans will stop. not numpad keys the keys over letter keys Title: Re: Miner crashing... GPU3 0 MH/s... PC reboots. Post by: dragonmike on May 13, 2017, 11:23:15 PM Ah you mean that if gpu3 is faulty, I just press 3 and it'll disable it? That would then be easy to spot indeed...
Title: Re: Miner crashing... GPU3 0 MH/s... PC reboots. Post by: cashen on May 14, 2017, 04:55:48 AM You can use WattTool to see which clock goes to 300 and then force the fan speed 2400 and you will find it quickly.
Title: Re: Miner crashing... GPU3 0 MH/s... PC reboots. Post by: szafa on May 14, 2017, 05:47:15 AM There is maybe psu.
Title: Re: Miner crashing... GPU3 0 MH/s... PC reboots. Post by: Nalut on June 12, 2017, 03:29:38 AM What type of gpu ?
Did you find a solution to this? I've got the same motherboard i hope i won't get in trouble using 2 gtx 1080 ti cards on it :'( Title: Re: Miner crashing... GPU3 0 MH/s... PC reboots. Post by: Mattthev on June 12, 2017, 07:37:38 AM Hi dragonmike,
did you reinstall drivers after flash those cards? What PSU does it have? Try switch cards in raisers, for example switch GPU 2 with GPU 3. If you don't know what GPU it is, it should be the one which doesn't spin fans or they are spinning all the time, even when idle - that probably means bad drivers or bad raiser (maybe only bad connected). Title: Re: Miner crashing... GPU3 0 MH/s... PC reboots. Post by: Mattthev on June 12, 2017, 07:38:31 AM What type of gpu ? Dude, 2 GPUs can run every mobo with two PCIe x16...Did you find a solution to this? I've got the same motherboard i hope i won't get in trouble using 2 gtx 1080 ti cards on it :'( |