|
Title: Two new T9 miners. One won't hash Post by: Sukovsky on May 19, 2017, 07:56:39 PM Hi,
I just got my two new T9 miners in. One is working properly. The other won't hash and show a red blinking light after the booting process completes. The difference that it has with the working T9 is that it shows very high temperatures 105-115 for all three boards. I checked for loose heatsinks and there are none. Also the fan blowing at 100% blows out cool air from the miner. I tried resetting, rebooting and upgrading the firmware but to no avail. They both have the same settings. Could it be a faulty temp sensor? Can't really find a lot of info on the interwebs, so maybe someone here can help me out. Thanks. Title: Re: Two new T9 miners. One won't hash Post by: NotFuzzyWarm on May 19, 2017, 08:59:29 PM Yes if the miner is or thinks it is over-heated hashing stops.
The high readings are while it is blowing out cool air? If so, start a support/repair ticket with Bitmain 'cause something is not right... Posting a screen shot of the GUI so folks can see what its reporting is um, always a good idea... |