|
Title: Problem Gigabyte r9 290 Post by: Holyblood89 on May 21, 2017, 03:12:54 PM http://s018.radikal.ru/i505/1705/22/d5653cd5990b.jpg (http://radikal.ru)
Problem Gigabyte r9 290 what is the problem? The driver for the card is normally installed, no artifacts... When I turn on the mining then the system issues a blue screen Title: Re: Problem Gigabyte r9 290 Post by: Holyblood89 on May 21, 2017, 03:39:35 PM No one this has happened? Give at least somebody a theory that maybe?
The problem appeared immediately after cleaning and changing the thermal paste. Title: Re: Problem Gigabyte r9 290 Post by: Bustart on May 21, 2017, 04:47:10 PM No one this has happened? Give at least somebody a theory that maybe? The problem appeared immediately after cleaning and changing the thermal paste. Can you reduce the clock frequency or use another BIOS with the switch? Title: Re: Problem Gigabyte r9 290 Post by: adaseb on May 21, 2017, 10:04:49 PM No one this has happened? Give at least somebody a theory that maybe? The problem appeared immediately after cleaning and changing the thermal paste. If this happened when you cleaned your thermal paste its because you pulled too hard when seperating heatsink from GPU chip and ended up either cracking the GPU chip (micro crack) or you cracked some of the solder under the GPU. So try the oven trick method. In the future, don't change thermal paste, it won't improve temps and you will only risk damaging it. |
