Title: CHNcoin mining (4LTC bounty!) edit: CLAIMED Post by: Jbanna on May 02, 2013, 02:21:34 PM Hey everyone. I'm running into some unusual problems trying to mine with ubuntu 11.04 w/ reaper. I've set my litecoin.conf appropriately to the pool pool.dillavouws.com... but after the gpu threads are created in reaper nothing happens....
Any suggestions are welcome :). First to get me up and running gets 4 shiny LTC! Thanks, Jbanna Title: Re: CHNcoin mining (4LTC bounty!) Post by: desert_beagle on May 02, 2013, 02:38:35 PM Ok try this settings
This is for my 6970 but for your specific GPU go here:https://github.com/litecoin-project/litecoin/wiki/Mining-hardware-comparison (https://github.com/litecoin-project/litecoin/wiki/Mining-hardware-comparison) litecoin.conf host [NameOfTheHost] port [PoolPort] user [YourUserName] pass [password] protocol litecoin worksize 256 aggression 18 threads_per_gpu 2 sharethreads 4 lookup_gap 2 gpu_thread_concurrency 8144 long_polling yes reaper.conf kernel reaper.cl save_binaries yes enable_graceful_shutdown yes long_polling yes platform 0 device 0 cpu_mining_threads 0 mine litecoin Title: Re: CHNcoin mining (4LTC bounty!) Post by: jdebunt on May 02, 2013, 02:54:32 PM Litecoin conf for mining CHNcoin? :) perhaps that might be the issue too ;)
Title: Re: CHNcoin mining (4LTC bounty!) Post by: TheSwede75 on May 02, 2013, 02:57:12 PM Hey everyone. I'm running into some unusual problems trying to mine with ubuntu 11.04 w/ reaper. I've set my litecoin.conf appropriately to the pool pool.dillavouws.com... but after the gpu threads are created in reaper nothing happens.... Any suggestions are welcome :). First to get me up and running gets 4 shiny LTC! Thanks, Jbanna Are you trying to solo mine or pool mine. If you are looking to use a pool the .conf file is of no use right. You can just pass the variables straight to the miner without the conf file. Title: Re: CHNcoin mining (4LTC bounty!) Post by: Jbanna on May 02, 2013, 03:30:45 PM Are you trying to solo mine or pool mine. If you are looking to use a pool the .conf file is of no use right. You can just pass the variables straight to the miner without the conf file. I'd have to use the conf file to point my miner in the right direction. I've been mining LTC/ FTC no problem. Perhaps it's just a pool issue? Anybody have successful use with another pool? Title: Re: CHNcoin mining (4LTC bounty!) Post by: Boelens on May 02, 2013, 03:39:24 PM Hey everyone. I'm running into some unusual problems trying to mine with ubuntu 11.04 w/ reaper. I've set my litecoin.conf appropriately to the pool pool.dillavouws.com... but after the gpu threads are created in reaper nothing happens.... Any suggestions are welcome :). First to get me up and running gets 4 shiny LTC! Thanks, Jbanna Could you give some screenshots and / or more information? You should just be able to use reaper and use a litecoin conf, do you have host and all configured well? Error messages? Title: Re: CHNcoin mining (4LTC bounty!) Post by: sido on May 02, 2013, 03:40:53 PM Are you trying to solo mine or pool mine. If you are looking to use a pool the .conf file is of no use right. You can just pass the variables straight to the miner without the conf file. I'd have to use the conf file to point my miner in the right direction. I've been mining LTC/ FTC no problem. Perhaps it's just a pool issue? Anybody have successful use with another pool? for me it's working fine, i'm using pushpool to connect edit: reaper.conf kernel reaper.cl save_binaries yes enable_graceful_shutdown yes long_polling yes platform 0 device 0 device 1 mine litecoin litecoin.conf host server.eu port 8333 user test.1 pass x protocol litecoin worksize 256 vectors 1 aggression 19 threads_per_gpu 1 sharethreads 32 lookup_gap 2 gpu_thread_concurrency 24000 Title: Re: CHNcoin mining (4LTC bounty!) Post by: sido on May 02, 2013, 03:46:09 PM Hey everyone. I'm running into some unusual problems trying to mine with ubuntu 11.04 w/ reaper. I've set my litecoin.conf appropriately to the pool pool.dillavouws.com... but after the gpu threads are created in reaper nothing happens.... but maybe you just can wait for a while, until kernel for new settings matched with your card will be compiled in reaperAny suggestions are welcome :). First to get me up and running gets 4 shiny LTC! Thanks, Jbanna Title: Re: CHNcoin mining (4LTC bounty!) Post by: Jbanna on May 02, 2013, 05:06:59 PM hey sido, that pool you're using works for me man. Thanks pal. I presume I was just having difficulties connecting to the first pool. Oh well. I'm true to my word then... Please send me your LTC address for your pay :). If anybody else wants to know how it worked for me with 4 x 6870 here are settings...
host binarycoins.eu port 8333 user jbanna.1 pass x protocol litecoin worksize 256 aggression 18 threads_per_gpu 1 sharethreads 18 lookup_gap 2 gpu_thread_concurrency 6144 P.S. why does it say SMC/ day?? Title: Re: CHNcoin mining (4LTC bounty!) Post by: sido on May 02, 2013, 06:05:26 PM hey sido, that pool you're using works for me man. Thanks pal. I presume I was just having difficulties connecting to the first pool. Oh well. I'm true to my word then... Please send me your LTC address for your pay :). If anybody else wants to know how it worked for me with 4 x 6870 here are settings... host binarycoins.eu port 8333 user jbanna.1 pass x protocol litecoin worksize 256 aggression 18 threads_per_gpu 1 sharethreads 18 lookup_gap 2 gpu_thread_concurrency 6144 P.S. why does it say SMC/ day?? fixed :) my bad there is my LTC: Lh97XiVQu6qYiSrRkn93SVAfFiZUUchYMd thanks :) Title: Re: CHNcoin mining (4LTC bounty!) Post by: Jbanna on May 02, 2013, 06:43:01 PM sent. enjoy ;D
|