|
Title: Need Help, First Mining Rig Build...Did I choose the wrong motherboard? Post by: End2135 on May 29, 2017, 03:34:34 AM Hello, I have built my first mining rig, mining ethereum right now. I am having a couple problems though.
ASrock Z97 Extreme 4, MSI rx570 (4x right now running, but I have 2 more to plug in, or a 480 and a 290), running on ethOS. My first issues, is that I get no display when I run a 4th gpu, but with 3 the display comes up just fine. I am mining with 4 gpus though, the fans ramp up and everything checks out on ethermine.org stats page. Stock bios for now, running around 20-21 mh/s ea. I have tried all 4 gpus for the output to the monitor as well as the onboard, and no display comes up with 4 gpu's connected. My next issue is that when I connect a 5th gpu, I get no mining, the fans do not ramp up and get to work as they do with 3 or 4 gpus. Any help would be much appreciated, thank you. Title: Re: Need Help, First Mining Rig Build... Post by: feiya200 on May 29, 2017, 03:41:41 AM You should at least check out windows device manager see if all GPUs are all recognized and functioning properly. If not, try edit your bios setting like "PCI E Gen", and "Above 4G Encoding"
Title: Re: Need Help, First Mining Rig Build... Post by: End2135 on May 29, 2017, 04:08:57 AM I'm not running windows, ethOS is linux.
I don't have an option in my bios for 4g encoding, I can change the gen1/2/3 or auto, but not seeing an encoding option. Title: Re: Need Help, First Mining Rig Build... Post by: Vaccinus on May 29, 2017, 10:08:53 AM i'm sure that motherboard can't support any mining with risers, are you using pcie slot? because when i had that motherboard and i connected the risers, the screen went black and there was no signal at all, it's no use for risers, so at best youc anrun 3 gpu there
Title: Re: Need Help, First Mining Rig Build... Post by: End2135 on May 29, 2017, 04:32:51 PM Yeah, I'm using risers. I have 3 connected to the short slots, and one to the last long slot (there are 3 of each on this board)
Also, yeah, I may have come to that conclusion with help on a discord chat lastnight from some one, about this board only supporting 3 gpu's...was hoping I haddn't chosen the wrong board, but it is looking that way... Guess I just need to build another rig now. |