|
Title: Poll: How much does it cost Butterfly Labs (BFL) to build a Jallapeno? Post by: Exoskeleton on May 04, 2013, 06:34:29 AM This is the total cost involved including:
* 65nm Chips (x2 per jallapeno) * PCB Fully Assembled (just the way you see it in the video) * Custom heatsink * Fan * Metal Case (Including all screws/hardware) * PSU (with cords and wiring) * Employee costs per unit to hand build, test, and pack (1/2Hr wage?) I just made a thread asking this question in detail. If you would like to answer the question in detail, search for the topic by the same name as this poll. There was a video posted this week showing a jallapeno being torn down to basic parts: http://www.youtube.com/watch?v=ciwfCqP8AiU Thanks for your answers everyone! ;D Title: Re: Poll: How much does it cost Butterfly Labs (BFL) to build a Jallapeno? Post by: Lethn on May 04, 2013, 11:07:41 AM That's actually pretty interesting, didn't know about this video before.
Title: Re: Poll: How much does it cost Butterfly Labs (BFL) to build a Jallapeno? Post by: Schrankwand on May 04, 2013, 12:49:26 PM This is the total cost involved including: * 65nm Chips (x2 per jallapeno) * PCB Fully Assembled (just the way you see it in the video) * Custom heatsink * Fan * Plastic Case (Including all screws/hardware) * PSU (with cords and wiring) * Employee costs per unit to hand build, test, and pack (1/2Hr wage?) I just made a thread asking this question in detail. If you would like to answer the question in detail, search for the topic by the same name as this poll. There was a video posted this week showing a jallapeno being torn down to basic parts: http://www.youtube.com/watch?v=ciwfCqP8AiU Thanks for your answers everyone! ;D Probably around 40-50 bucks at most. Title: Re: Poll: How much does it cost Butterfly Labs (BFL) to build a Jallapeno? Post by: camaro69327 on May 04, 2013, 12:56:48 PM This is the total cost involved including: * 65nm Chips (x2 per jallapeno) * PCB Fully Assembled (just the way you see it in the video) * Custom heatsink * Fan * PSU (with cords and wiring) * Employee costs per unit to hand build, test, and pack (1/2Hr wage?) I just made a thread asking this question in detail. If you would like to answer the question in detail, search for the topic by the same name as this poll. There was a video posted this week showing a jallapeno being torn down to basic parts: http://www.youtube.com/watch?v=ciwfCqP8AiU Thanks for your answers everyone! ;D From reports Quote After removing the flat-rate box the well known grey Butterfly Labs box made it's first of many appearances in my house. I eagerly cut into the box and discovered a brushed metal box with the Butterfly Labs logo on top. From someone that has one ..... https://forums.butterflylabs.com/bfl-forum-miscellaneous/2333-my-jalapeno-experience.html Title: Re: Poll: How much does it cost Butterfly Labs (BFL) to build a Jallapeno? Post by: Malawi on May 05, 2013, 01:54:55 AM This is the total cost involved including: * 65nm Chips (x2 per jallapeno) * PCB Fully Assembled (just the way you see it in the video) * Custom heatsink * Fan * Metal Case (Including all screws/hardware) * PSU (with cords and wiring) * Employee costs per unit to hand build, test, and pack (1/2Hr wage?) I just made a thread asking this question in detail. If you would like to answer the question in detail, search for the topic by the same name as this poll. There was a video posted this week showing a jallapeno being torn down to basic parts: http://www.youtube.com/watch?v=ciwfCqP8AiU Thanks for your answers everyone! ;D Just to pull some numbers out of my behind, as a starting point. chips - somewhere around 5-10 per piece, but unsure if the jalapeno have one dummy for the balance of the heatsink or two active chips - $20 (The avalon chips can be bought at around $10 with the group-buy thing.) PCB - no idea $10-15? Heatsink - I don't think it's a custom one, but rather a "shelf-product". Most likely $5 possibly up til $10 to be sure. Fan - $1 Metal case - maybee $2-4 Screws/wires $2 PSU - in the $10 range Cardboard box - $1 Employee cost - maybee $6 in the US or $1 in China. If these numbers are in the ballpark, that would mean about $67, if we add 50%, we get $100. The costs are very volume dependant on most of the components. - Especially the chips. Some may not be that much cheaper with volumes, like the heatsink and metal case. Title: Re: Poll: How much does it cost Butterfly Labs (BFL) to build a Jallapeno? Post by: cdog on May 05, 2013, 08:12:45 AM $3.50
Title: Re: Poll: How much does it cost Butterfly Labs (BFL) to build a Jallapeno? Post by: m3whiteknight on May 05, 2013, 04:11:03 PM I say $50- 100 is the most. Now here is the interesting thing, from 5ghs to 50ghs Single SC BFL only need to add more chips at around $5 each. So total cost for a Singel SC is around $130 max and they selling for $2500.
That is 1900% profit margin. Title: Re: Poll: How much does it cost Butterfly Labs (BFL) to build a Jallapeno? Post by: Exoskeleton on May 05, 2013, 05:00:01 PM I say $50- 100 is the most. Now here is the interesting thing, from 5ghs to 50ghs Single SC BFL only need to add more chips at around $5 each. So total cost for a Singel SC is around $130 max and they selling for $2500. That is 1900% profit margin. For a single sc they need 10x the chips, 10x the pcbs, 10x heatsinks/fans, 10x the psu output, and a case that is about 10x the size. It should cost about 10x the price of a jallepeno to build each single sc because it will be 10 jallapenos more or less in one box. This part is not confirmed but has been strongly suggested even by BFL. They will stack up multiple jallapenos like they did with the bitforces to make a mini-rig. I think BFL pays over $5 each per chip and pcb. It could be 10x that based on the costs involved with printing wafers at 65nm and high failure rates. Title: Re: Poll: How much does it cost Butterfly Labs (BFL) to build a Jallapeno? Post by: Stampbit on May 05, 2013, 05:52:54 PM three fity.
Title: Re: Poll: How much does it cost Butterfly Labs (BFL) to build a Jallapeno? Post by: pinger on May 05, 2013, 06:05:14 PM There was a video posted this week showing a jallapeno being torn down to basic parts: http://www.youtube.com/watch?v=ciwfCqP8AiU Thanks for your answers everyone! ;D I'm sure Butterfly is very happy with someone doing reverse engineering even before they ship XD I think this guy is not going to receive another unit ever ;) Title: Re: Poll: How much does it cost Butterfly Labs (BFL) to build a Jallapeno? Post by: Malawi on May 05, 2013, 06:50:11 PM There was a video posted this week showing a jallapeno being torn down to basic parts: http://www.youtube.com/watch?v=ciwfCqP8AiU Thanks for your answers everyone! ;D I'm sure Butterfly is very happy with someone doing reverse engineering even before they ship XD I think this guy is not going to receive another unit ever ;) It's not really reverse engineering before x-raying the ASIC-chip itself to find out how it's built up. The rest of the stuff has to be considdered known hardware. Title: Re: Poll: How much does it cost Butterfly Labs (BFL) to build a Jallapeno? Post by: mokahless on May 07, 2013, 08:37:02 PM This question can't really be answered. The highest costs were designing and contracting for the chips to be built. The more they ship, the lower the cost per unit.
And for BFL, specifically, all their fuck-ups, redesigns and underestimating cost them even more. |