Bitcoin Forum

Hello, sorry if my topic is not in the right section.

I bought https://www.msi.com/Graphics-card/GeForce-GTX-1060-3GT-OC.html (hynix) this card and , I could not believe what I saw ;

niceHash ;               claymore ;               

ethash : 15 mh/s      ethash : 15 mh/s

All other algo speed is regular 1060s speed but ethash 15-16 mh/s with default setting .I tried diffirent nvidia drivers but result is same , any suggestion ?

I'm also having this issue on my ASUS Dual 3gb. Tried a lot of drivers to no avail (Win10x64). Grateful for any solutions!

did you tried modded bios this will help you out

You need to oc memory 600-1000mhz to get 22Mhash

Hi,

I don't know if this your setup, but if you have the on-board display enabled, disable it from bios.
Users have reported that this fixed their issue with 1060 cards.

Hope this will help you.

Stock i should be getting around 19mh/s instead of 15mh/s. With a 600mhz o/c i only get 18mh/s

unfortunately this didn't work but thanks for the suggestion.

Read the following. Users reported that it's a windows thing, and after updating to the latest version it worked fine. Others say it's Drivers version related.
Check it out: https://www.reddit.com/r/EtherMining/comments/6cktr8/gtx_1060_hash_rate/ (https://www.reddit.com/r/EtherMining/comments/6cktr8/gtx_1060_hash_rate/)

I tried Oc (max 19mhs) , windows creators update , bios thing ,any drivers , multiple miners and pool . Result is same , any idea ?

I bought for testing some nvidia cards,
atm I'm on asus dual 1060 4g with hynix memory
I did a bit research and figured out that they are working better on linux, I'm going to try that today.
on stock I get 15mhs and 18mhs on 200/500 and after couple minutes crash.
I think hynix memory is the problem in my case
any suggestions and ideas will be helpful for me too

You can't overclock memory to 600 mhz, because freakin Hynix crashing windows on 380-390 mhz ...

damn hynix even micron is performing better
any ideas for other options? any suggestions?

Hi i have 6x msi gtx 1060 gaming x 3gb i was able to overclock them to +750 memory and +30 core have ethereum only 19,5 mh/s per card. Have last nvidia drivers installed and last windows driver too. Can it be becouse of windows, maby i should try lynux unbuntu or simplemining os. Can somebody help?

Now is more profitable to mine ZEC with 1060 3Gb Hynix, because on ZEC I get 295-300 sol/s, on ETH I get only 17.7-18 Mh/s.
With current difficulties and hash rates, my profit is 12-13% higher on ZEC.
 

Why ZEC over DGB skein?

install driver cuda 8.0 and you will see a diference

i have cuda 8.0. It seems hynix memory is to blame :(

hynix is the reason, samsung and even micron works way better

Hi,

I found this on someone else reply to having bad hashrate with nvidia cards.

check this settings:

NVIDIA Control Panel -> Manage 3D Settings -> Optimize for compute performance -> On

Thanks, unfortunately this setting is for 9x series cards only. Its already enabled on 10x series and isnt even an option in the driver settings.

experiencing the same thing with my cards msi 1060 3gb dual fans.

only getting about 14.8-15mh per card.

i see other users get 18mh and above for stock settings, any solutions to fix my low hashrate?

Same issue with all 10 of my Asus Phoenix 1060 3gb, they all have Hynix memory. It doesn't overclock bad, it just seems to be slow.

To all of you wondering about lower hashrates with their GTX 1060-3,
as I said before here
https://bitcointalk.org/index.php?topic=1575547.msg19288923#msg19288923 (https://bitcointalk.org/index.php?topic=1575547.msg19288923#msg19288923)

I won´t recommend the GTX-1060 with 3 GB because they have less cuda-cores, a lower bandwidth memory interface and usually lower base/boost-clocks.

GTX 1060-6: 1280 cores
GTX-1060-3: 1152 cores

... so now way to get the same speed.

I trimmed my 2 cards a little more with MEM + 600, now getting ~ 44.5 MH/s at daggerhashimoto,
still using 230W at wall with one core G4400 mining cryptonight at 49 H/s on top.

 ;D

Anyone got solution for Hynix moemory ?

I'm writing through an interpreter, do not scold ...

Yes, the problem is in the memory of Hynix.
An interesting result of 17.5 mh/s is obtained if we decrease the memory frequency by -150. Try it. This indicates that the problem is in the timings.

Urgently need a BIOS programmer to replace timings. Or the finished BIOS is already replaced by timings.

Are ready to pay, who can find, which will crack the encrypted BIOS.