Title: All Shares Rejected Post by: kjr2686 on June 14, 2017, 01:20:23 PM I'm new to this. I studies for a long time to get everything right and I'm running into a wall. I'm sure whatever i'm missing is something staring me in the face, but here it goes..
I am using claymore. I have the 15.xx version of my GPU driver installed. Here is what pops up in my miner, I cant figure it out. C:\Users\Ken\Desktop\Claymore's Dual Ethereum+Decred_Siacoin_Lbry_Pascal AMD+NVIDIA GPU Miner v9.5 - Catalyst 15.12-17.x - CUDA 8.0_7.5_6.5\Claymore's Dual Ethereum+Decred_Siacoin_Lbry_Pascal AMD+NVIDIA GPU Miner v9.5>EthDcrMiner64.exe -epool us1.ethermine.org:4444 -mode 1 -allpools 1 -ewal 8d81500bc8547fdeff2d89f57d3ad8f611230edf3868b5b31aabbf1e917083bd.rig1 -epsw x ╔════════════════════════════════════════════════════════════════╗ ║ Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.5 ║ ╚════════════════════════════════════════════════════════════════╝ ETH: 1 pool is specified Main Ethereum pool is us1.ethermine.org:4444 Catalyst 15.12 is REQUIRED for best performance and compatibility For Polaris cards, use latest drivers At least 16 GB of Virtual Memory is required for multi-GPU systems Make sure you defined GPU_MAX_ALLOC_PERCENT 100 Be careful with overclocking, use default clocks for first tests Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools, "e" or "d" to select current pool OpenCL initializing... AMD Cards available: 1 GPU #0: Fiji, 4096 MB available, 64 compute units GPU #0 recognized as Fury X/Nano POOL/SOLO version GPU #0: algorithm ASM No NVIDIA CUDA GPUs detected. Total cards: 1 ETH: Stratum - connecting to 'us1.ethermine.org' <149.56.26.221> port 4444 ETHEREUM-ONLY MINING MODE ENABLED (-mode 1) ETH: eth-proxy stratum mode "-allpools" option is set, default pools can be used for devfee, check "Readme" file for details. ETH: Stratum - Connected (us1.ethermine.org:4444) Watchdog enabled Remote management (READ-ONLY MODE) is enabled on port 3333 ETH: Share rejected! Socket was closed remotely (by pool) ETH: Job timeout, disconnect, retry in 20 sec... ETH: Stratum - connecting to 'us1.ethermine.org' <149.56.26.221> port 4444 ETH: Stratum - Connected (us1.ethermine.org:4444) ETH: Share rejected! Socket was closed remotely (by pool) ETH: Job timeout, disconnect, retry in 20 sec... If i leave it running, it will just keep rejecting shares.. What do I do here? Title: Re: All Shares Rejected Post by: DgeromHolden on June 30, 2017, 04:43:04 AM try to increase memory cklock in Afterburner
Title: Re: All Shares Rejected Post by: Ahead on June 30, 2017, 08:13:01 AM I'm new to this. I studies for a long time to get everything right and I'm running into a wall. I'm sure whatever i'm missing is something staring me in the face, but here it goes.. I am using claymore. I have the 15.xx version of my GPU driver installed. Here is what pops up in my miner, I cant figure it out. C:\Users\Ken\Desktop\Claymore's Dual Ethereum+Decred_Siacoin_Lbry_Pascal AMD+NVIDIA GPU Miner v9.5 - Catalyst 15.12-17.x - CUDA 8.0_7.5_6.5\Claymore's Dual Ethereum+Decred_Siacoin_Lbry_Pascal AMD+NVIDIA GPU Miner v9.5>EthDcrMiner64.exe -epool us1.ethermine.org:4444 -mode 1 -allpools 1 -ewal 8d81500bc8547fdeff2d89f57d3ad8f611230edf3868b5b31aabbf1e917083bd.rig1 -epsw x ╔════════════════════════════════════════════════════════════════╗ ║ Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.5 ║ ╚════════════════════════════════════════════════════════════════╝ ETH: 1 pool is specified Main Ethereum pool is us1.ethermine.org:4444 Catalyst 15.12 is REQUIRED for best performance and compatibility For Polaris cards, use latest drivers At least 16 GB of Virtual Memory is required for multi-GPU systems Make sure you defined GPU_MAX_ALLOC_PERCENT 100 Be careful with overclocking, use default clocks for first tests Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools, "e" or "d" to select current pool OpenCL initializing... AMD Cards available: 1 GPU #0: Fiji, 4096 MB available, 64 compute units GPU #0 recognized as Fury X/Nano POOL/SOLO version GPU #0: algorithm ASM No NVIDIA CUDA GPUs detected. Total cards: 1 ETH: Stratum - connecting to 'us1.ethermine.org' <149.56.26.221> port 4444 ETHEREUM-ONLY MINING MODE ENABLED (-mode 1) ETH: eth-proxy stratum mode "-allpools" option is set, default pools can be used for devfee, check "Readme" file for details. ETH: Stratum - Connected (us1.ethermine.org:4444) Watchdog enabled Remote management (READ-ONLY MODE) is enabled on port 3333 ETH: Share rejected! Socket was closed remotely (by pool) ETH: Job timeout, disconnect, retry in 20 sec... ETH: Stratum - connecting to 'us1.ethermine.org' <149.56.26.221> port 4444 ETH: Stratum - Connected (us1.ethermine.org:4444) ETH: Share rejected! Socket was closed remotely (by pool) ETH: Job timeout, disconnect, retry in 20 sec... If i leave it running, it will just keep rejecting shares.. What do I do here? Hi, fix your wallet address in the .bat file!!! replace 8d81500bc8547fdeff2d89f57d3ad8f611230edf3868b5b31aabbf1e917083bd.rig1 with 0x8d81500bc8547fdeff2d89f57d3ad8f611230edf3868b5b31aabbf1e917083bd.rig1 (note the 0x in front) |