Title: ASUS PRIME Z270-P with GTX 1060 6GB build help Post by: josh9000 on June 19, 2017, 04:04:36 AM Just working on a new mining build with multiple 1060 6GB cards but I am having trouble getting the cards on risers to work. Not sure where I am going wrong so any help would be appreciated. I am at the very start so will go through all the steps I have done.
Connect all system parts – no cards Install windows using integrated graphics Update BIOS to latest Install 1 card direct in board PCIe x16 slot 1- SUCCESS Install latest NVidia drivers - SUCCESS Remove the card from slot, add powered riser to that slot, and insert that card into the riser. – FAIL Card in same slot using riser will not show up in device manager. Card direct to slot- fine. Card in same slot via a riser fails? I have tried multiple risers. Title: Re: ASUS PRIME Z270-P with GTX 1060 6GB build help Post by: poby on June 19, 2017, 04:20:55 AM What version riser are you using and how are you powering it?
Title: Re: ASUS PRIME Z270-P with GTX 1060 6GB build help Post by: josh9000 on June 19, 2017, 04:27:38 AM Version 006C, powered by molex straight from PSU. I uploaded a photo here http://imgur.com/a/C6VrW (http://imgur.com/a/C6VrW)
Title: Re: ASUS PRIME Z270-P with GTX 1060 6GB build help Post by: josh9000 on June 19, 2017, 08:18:22 AM Have tried both molex and the sata power cables for the risers
Title: Re: ASUS PRIME Z270-P with GTX 1060 6GB build help Post by: josh9000 on June 20, 2017, 04:04:29 AM I am thinking it could be a bad batch. Just tested another riser in a different machine and nothing. Is there any other way I could test the riser to make sure its good?
|