Title: Powered Risers Post by: TheFuneral on May 07, 2013, 06:28:19 PM Hello guys,
I'm setting up a rig with 4 cards and have bought powered risers for it. I'm not sure I fully understand how to set them up correctly. Would I just get the cables from my PSU that have been used for cd-roms/floopys/older hdds that look like this? http://www.computercablestore.com/12_Inch_Internal_Power_Su_PID1633.aspx and plug them into the one male portion of the power cable coming off my riser? Will the direction matter? Thanks again for your help, Title: Re: Powered Risers Post by: Buffer Overflow on May 07, 2013, 06:37:08 PM They are keyed you cannot plug them the wrong way around.
Title: Re: Powered Risers Post by: TheFuneral on May 07, 2013, 06:38:21 PM so the power plugs I posted above are the correct ones to use for my risers? I also plug the other end coming off my PSU?
Title: Re: Powered Risers Post by: papaminer on May 07, 2013, 06:40:02 PM so the power plugs I posted above are the correct ones to use for my risers? I also plug the other end coming off my PSU? yes male to female or female to male... cant do gays or lesbians... Title: Re: Powered Risers Post by: thekidcoin on May 07, 2013, 06:47:15 PM They should work fine...
Title: Re: Powered Risers Post by: Malawi on May 07, 2013, 07:25:45 PM Only make sure that you use the correct wire from that plug. ;)
Title: Re: Powered Risers Post by: eddyfitz on May 07, 2013, 07:26:45 PM You're good to go
Title: Re: Powered Risers Post by: Buffer Overflow on May 07, 2013, 07:45:02 PM Oh, and don't forget your PSU has to be powerful enough to take the extra load.
Title: Re: Powered Risers Post by: eddyfitz on May 07, 2013, 07:46:51 PM Oh, and don't forget your PSU has to be powerful enough to take the extra load. You may also try 2nd PSU to power up just video card(s). Google it for manual. |