Title: claymore mining error help? Post by: adamantasaurus on July 05, 2017, 02:25:24 PM I'm setting up my first mining rig, and I got everything up and running and was following a tutorial to install the mining software (I chose claymore) and I made a bat file with the correct script but when I run the miner it keeps giving me these errors:
GPU 2 failed GPU 2, CUDA error 11 - cannot write buffer for DAG CUDA error - cannot allocate big buffer for DAG. Check readme.txt for possible solutions. Setting DAG epoch #132 for GPU2 GPU 2 failed GPU 2, CUDA error 11 - cannot write buffer for DAG GPU 2 failed and then after it tells me my hash rates it says: WATCHDOG: GPU error, you need to restart miner :( Restarting OK, exit... And then runs again with the same thing happening. I read the readme but can't find a solution any help would be appreciated. Thanks Title: Re: claymore mining error help? Post by: Deathwing on July 05, 2017, 02:50:46 PM What model/brand is your GPU?
Title: Re: claymore mining error help? Post by: TripToCrypto on July 05, 2017, 03:23:11 PM Please firstly specify your hardware parameters and what coin
Title: Re: claymore mining error help? Post by: adamantasaurus on July 05, 2017, 03:26:23 PM What model/brand is your GPU? I have 6x evga gtx 1070 sc black asrock h81 btc mobo 2x 750w evga titanium psu I'm trying to mine ETH Title: Re: claymore mining error help? Post by: opies32765 on July 05, 2017, 05:50:08 PM lower your clock rates
Title: Re: claymore mining error help? Post by: adamantasaurus on July 05, 2017, 07:32:18 PM lower your clock rates Ok thanks, how do I do that? I didn't mess with the clocking at all it is right out of the box? it says I'm getting about 25mh Title: Re: claymore mining error help? Post by: Deathwing on July 05, 2017, 10:13:02 PM lower your clock rates Ok thanks, how do I do that? I didn't mess with the clocking at all it is right out of the box? it says I'm getting about 25mh I was going to say you are running out of VRAM because Claymore's DAG is cached there but I doubt it's that. Check out MSI Afterburner for clocks, overclocking, underclocking etc. Title: Re: claymore mining error help? Post by: adamantasaurus on July 05, 2017, 10:48:06 PM lower your clock rates Ok thanks, how do I do that? I didn't mess with the clocking at all it is right out of the box? it says I'm getting about 25mh I was going to say you are running out of VRAM because Claymore's DAG is cached there but I doubt it's that. Check out MSI Afterburner for clocks, overclocking, underclocking etc. Yea, I put my virtual memory at min: 16384 max: 16384 so I will try messing around with my clocking and see if that works, thanks again |