|
Title: impossible to OC second card Post by: Apolo29 on June 20, 2011, 03:08:35 PM i have two 5830`s running on an Asus M4A79 deluxe motherboard and win xp
i tried with trixx, amd gpu tool clock and msi afterburner, but with any could oc 2nd card after 875 mhz, can anyone help me? The first is a 1000 mhz/300 with 310 mhash Title: Re: impossible to OC second card Post by: d.james on June 20, 2011, 04:53:18 PM each card has different oc level, you may need to pump the voltage on that 2nd card a little with trixx if possible.
Title: Re: impossible to OC second card Post by: Apolo29 on June 20, 2011, 06:06:03 PM The problem is that Trixx don`t recognize 2nd card, just working with 1st.
Cards where running alone i different machines and both worked ok at 1000 mhz, the thing is i donīt know how to oc the second one over 875 mhz now that they are in the same motherboard. Title: Re: impossible to OC second card Post by: Litt on June 20, 2011, 07:21:36 PM The problem is that Trixx don`t recognize 2nd card, just working with 1st. Cards where running alone i different machines and both worked ok at 1000 mhz, the thing is i donīt know how to oc the second one over 875 mhz now that they are in the same motherboard. crossfire them. Title: Re: impossible to OC second card Post by: Apolo29 on June 20, 2011, 08:44:55 PM I put the in cross and i donīt know why just the first one works ( 300 mh ) and canīt make the second one work.
Title: Re: impossible to OC second card Post by: Jack of Diamonds on June 20, 2011, 09:13:16 PM Crossfire is bad for mining performance.
You should run each GPU separately, both connected to monitors or having a dummy plug. Also, download AMD GPU clocking tool to force settings such as clock rate. Title: Re: impossible to OC second card Post by: dinker on June 20, 2011, 10:40:33 PM The problem is that Trixx don`t recognize 2nd card, just working with 1st. Would this work to trick the trixx: 1. set clocks to the first card as usual 2. switch your primary display to 2nd card, so trixx treats your 2nd card as 1st display. 3. set clocks to the 2nd card(which is now hopefully detected by trixx as your 1st) Title: Re: impossible to OC second card Post by: Mousepotato on June 22, 2011, 06:01:39 AM Crossfire is bad for mining performance. I have a similar issue (just got a 5830 as my 2nd card) and I'm having issues OC'ing it. With the AMD GPU tool whenever I try to adjust the core/memory clocks I get a "Set clock failed! Please check device configuration" error. Anybody got any tips to get this one working?You should run each GPU separately, both connected to monitors or having a dummy plug. Also, download AMD GPU clocking tool to force settings such as clock rate. |