Bitcoin Forum

Alternate cryptocurrencies => Mining (Altcoins) => Topic started by: antonio2234 on July 07, 2017, 12:20:03 AM


Title: 1070: What is the best clock setting?
Post by: antonio2234 on July 07, 2017, 12:20:03 AM
Hi,

I would like to ask what is the best clock setting for 1070 cards by MSI after burner to get best results and lowest power usage?

Title: Re: 1070: What is the best clock setting?
Post by: damstr on July 07, 2017, 12:27:12 AM
Quote from: antonio2234 on July 07, 2017, 12:20:03 AM
Hi,

I would like to ask what is the best clock setting for 1070 cards by MSI after burner to get best results and lowest power usage?

Understand it depends on what you are mining. Eth loves memory but Sia, Zcash and LBRY love core speed.

Title: Re: 1070: What is the best clock setting?
Post by: buzzkillb on July 07, 2017, 01:04:29 AM
Quote from: antonio2234 on July 07, 2017, 12:20:03 AM
Hi,

I would like to ask what is the best clock setting for 1070 cards by MSI after burner to get best results and lowest power usage?


I start at
power 60
Core 100
Memory 500
and then move sliders around depending on algo. EFWB Api shows sol/watts which is useful to max out the hash per watts on equihash.

Title: Re: 1070: What is the best clock setting?
Post by: antonio2234 on July 07, 2017, 04:58:38 AM
Quote from: damstr on July 07, 2017, 12:27:12 AM
Quote from: antonio2234 on July 07, 2017, 12:20:03 AM
Hi,

I would like to ask what is the best clock setting for 1070 cards by MSI after burner to get best results and lowest power usage?

Understand it depends on what you are mining. Eth loves memory but Sia, Zcash and LBRY love core speed.

For ETH only.
I have this configuration but as you see the temp is too hot!
http://i66.tinypic.com/14tu8hv.jpg

Title: Re: 1070: What is the best clock setting?
Post by: f00ch0w on July 07, 2017, 07:20:51 AM
I got GTX 1070 G1 Gaming 8GB and I use:

Powerlimit: 85%
Core Clock: -50
Memory Clock: +580
Fan: 60%
Hash: 30Mh/s

Title: Re: 1070: What is the best clock setting?
Post by: Davidet on July 07, 2017, 07:29:21 AM
For Eth with 4 PNY Carte Graphique GeForce GTX 1070 XLR8 OC GAMING 8GB GDDR5
I'm running:

Powerlimit: 120 W
Core Clock: -80
Memory Clock: +1400
Fan: 85%
Temp: 60°C
Hash: 31Mh/s

with Claymore

Title: Re: 1070: What is the best clock setting?
Post by: newmz on July 07, 2017, 08:37:03 AM
Quote from: antonio2234 on July 07, 2017, 04:58:38 AM
Quote from: damstr on July 07, 2017, 12:27:12 AM
Quote from: antonio2234 on July 07, 2017, 12:20:03 AM
Hi,

I would like to ask what is the best clock setting for 1070 cards by MSI after burner to get best results and lowest power usage?

Understand it depends on what you are mining. Eth loves memory but Sia, Zcash and LBRY love core speed.

For ETH only.
I have this configuration but as you see the temp is too hot!
http://i66.tinypic.com/14tu8hv.jpg


That temp isn't too hot at all! 65 degrees is fine. I think the limit on a Pascal card is 95 degrees.

I have a Gigabyte G1 gaming 1070, and if I'm using windows while mining eth I set the core at -200, memory at +800 and powerlimit at 80%.

It hashes at 30-32mh/s

Title: Re: 1070: What is the best clock setting?
Post by: kapsel on July 07, 2017, 08:43:00 AM
Nvidia gpus are designed to work at a constant 80c load, reference gpus will pretty much always go up to 80c in gaming workload, 92c is max, 65c while mining is excellent, there's nothing to worry about.

Title: Re: 1070: What is the best clock setting?
Post by: Kayfolom on July 07, 2017, 09:33:51 AM
im use Excavator with 5 x "GIGABYTE GeForce GTX 1070 G1 GAMING [GV-N1070G1 GAMING-8GD]" and config:
Code:
[
	{"time":1,"commands":[
		{"id":1,"method":"algorithm.add","params":["daggerhashimoto","eth.suprnova.cc:5000","*********.node07"]}
	]},
	{"time":2,"commands":[
		{"id":1,"method":"worker.add","params":["0","0"]},
		{"id":1,"method":"worker.add","params":["0","1"]},
		{"id":1,"method":"worker.add","params":["0","2"]},
		{"id":1,"method":"worker.add","params":["0","3"]},
		{"id":1,"method":"worker.add","params":["0","4"]}
	]},
	{"time":5,"commands":[
		{"id":1,"method":"device.set.tdp","params":					["0","80"]},
		{"id":1,"method":"device.set.core_delta","params":	["0","0"]},
		{"id":1,"method":"device.set.memory_delta","params":["0","750"]},
		{"id":1,"method":"device.set.tdp","params":					["1","80"]},
		{"id":1,"method":"device.set.core_delta","params":	["1","0"]},
		{"id":1,"method":"device.set.memory_delta","params":["1","750"]},
		{"id":1,"method":"device.set.tdp","params":					["2","80"]},
		{"id":1,"method":"device.set.core_delta","params":	["2","0"]},
		{"id":1,"method":"device.set.memory_delta","params":["2","750"]},
		{"id":1,"method":"device.set.tdp","params":					["3","80"]},
		{"id":1,"method":"device.set.core_delta","params":	["3","0"]},
		{"id":1,"method":"device.set.memory_delta","params":["3","750"]},
		{"id":1,"method":"device.set.tdp","params":					["4","80"]},
		{"id":1,"method":"device.set.core_delta","params":	["4","0"]},
		{"id":1,"method":"device.set.memory_delta","params":["4","750"]}
	]},
{"time":20,"commands":[
		{"id":1,"method":"worker.reset","params":["0"]},
		{"id":1,"method":"worker.reset","params":["1"]},
		{"id":1,"method":"worker.reset","params":["2"]},
		{"id":1,"method":"worker.reset","params":["3"]},
		{"id":1,"method":"worker.reset","params":["4"]}
	]},
	{"time":15,"loop":20,"commands":[
		{"id":1,"method":"worker.print.speed","params":["0"]},
		{"id":1,"method":"worker.print.speed","params":["1"]},
		{"id":1,"method":"worker.print.speed","params":["2"]},
		{"id":1,"method":"worker.print.speed","params":["3"]},
		{"id":1,"method":"worker.print.speed","params":["4"]},
		{"id":1,"method":"algorithm.print.speeds","params":["0"]}
	]},
	{"event":"on_quit","commands":[
		{"id":1,"method":"device.set.tdp","params":					["0","100"]},
		{"id":1,"method":"device.set.core_delta","params":	["0","0"]},
		{"id":1,"method":"device.set.memory_delta","params":["0","0"]},
		{"id":1,"method":"device.set.tdp","params":					["1","100"]},
		{"id":1,"method":"device.set.core_delta","params":	["1","0"]},
		{"id":1,"method":"device.set.memory_delta","params":["1","0"]},
		{"id":1,"method":"device.set.tdp","params":					["2","100"]},
		{"id":1,"method":"device.set.core_delta","params":	["2","0"]},
		{"id":1,"method":"device.set.memory_delta","params":["2","0"]},
		{"id":1,"method":"device.set.tdp","params":					["3","100"]},
		{"id":1,"method":"device.set.core_delta","params":	["3","0"]},
		{"id":1,"method":"device.set.memory_delta","params":["3","0"]},
		{"id":1,"method":"device.set.tdp","params":					["4","100"]},
		{"id":1,"method":"device.set.core_delta","params":	["4","0"]},
		{"id":1,"method":"device.set.memory_delta","params":["4","0"]}
	]}
]

Result:
https://i.imgur.com/TmIbmeR.jpg

Title: Re: 1070: What is the best clock setting?
Post by: kenelyka on July 07, 2017, 09:51:16 AM
Quote from: Davidet on July 07, 2017, 07:29:21 AM
For Eth with 4 PNY Carte Graphique GeForce GTX 1070 XLR8 OC GAMING 8GB GDDR5
I'm running:

Powerlimit: 120 W
Core Clock: -80
Memory Clock: +1400
Fan: 85%
Temp: 60°C
Hash: 31Mh/s

with Claymore

Have you tried eth+sia or zec? If yes, could you share the settings?

Title: Re: 1070: What is the best clock setting?
Post by: kenelyka on July 07, 2017, 03:59:52 PM
I have the following settings for my PNY GeForce GTX 1070 XLR8 OC GAMING 8GB GDDR5:

Power limit: 85%
Core clock: -50
Memory clock: +600
Fan: 60%

I use latest claymore and NVIDIA driver (Windows Enterprise 10 64bit) and I only get around 29.6 on ETH.

Could you please give me some advice how could I improve the performance of my system, please?


Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines