|
Title: Unstable, Gigabyte Mobo, GTX 1070 Post by: Miich94 on July 15, 2017, 03:22:27 PM Hey all,
My Specs are: Intel Celereon G3930 Gigabyte GA Z170 Gaming K3 8GB DDR4 RAM 60GB SSD 6x MSI GTX 1070 ARMOR OC 1200w Corsair Problem: When i bought my last GPU, i connected it, pc wont boot normal, it goes do the second bios automatic i think so there is some failure? I cant find the problem, and its only when i connect 6 GPU's does anyone here runs the same motherboard with 6 GPU's? When u use 6 cars, the MH\s is bouncing up and down. from 30mhs to 15->8 and again up. How is this possible? i tried everything with Afterburner current settings are: Power Limit 70% Mem Clock +700, it was all the time stable with 5 cars, disconnected differed cards if there was a problem with the 6th card but nothing. And atm. i am using Claymore dual miner Driver version 384,76 because windows did it automatically pool: Ethermine, Sia Nanopool Title: Re: Unstable, Gigabyte Mobo, GTX 1070 Post by: Unacceptable on July 15, 2017, 05:28:01 PM Wrong section.............
Check your bios settings I think you need to do something in there for PCIE enabling................................. |