|
Title: ETH + DCR Hashrate Post by: h2gvaka on July 19, 2017, 03:38:28 PM Hey fellas,
I'm mining ETH+SC for now but I'm thinking of trying ETH+DCR. Can you share your hashrates with RX470/480, GTX1070/1060? Thanks. Title: Re: ETH + DCR Hashrate Post by: Vann on July 19, 2017, 04:13:05 PM 4 RX 480/580 + 1 RX 570:
Code: ETH - Total Speed: 143.610 Mh/s, Total Shares: 256(49+56+50+49+57), Rejected: 0, Time: 01:58 Title: Re: ETH + DCR Hashrate Post by: pchampn on July 19, 2017, 04:17:56 PM 4 RX 480/580 + 1 RX 570: Code: ETH - Total Speed: 143.610 Mh/s, Total Shares: 256(49+56+50+49+57), Rejected: 0, Time: 01:58 That's a real good hashrate! Have you modded your BIOS, etc. to achieve such hash rate? For my RX 580 and RX 570, I get hash rate of 22 Mh/s and 18 Mh/s. Would appreciate if you can share some details. Thanks. Title: Re: ETH + DCR Hashrate Post by: Vann on July 19, 2017, 05:10:29 PM 4 RX 480/580 + 1 RX 570: Code: ETH - Total Speed: 143.610 Mh/s, Total Shares: 256(49+56+50+49+57), Rejected: 0, Time: 01:58 That's a real good hashrate! Have you modded your BIOS, etc. to achieve such hash rate? For my RX 580 and RX 570, I get hash rate of 22 Mh/s and 18 Mh/s. Would appreciate if you can share some details. Thanks. Yes, a simple strap mod using the Uber Mix v3.1 timings for the Samsung memory cards and the 1500 timing copied to the higher timings on the Hynix cards. That with 1150 MHz core clock and a 2050-2075 MHz memory clock with a -96 mV undervolt in Afterburner should get you to 28-29 MH/s with ~920 MH/s DCR for the RX 480/580 cards and ~740 MH/s with the RX 470/570 cards. Title: Re: ETH + DCR Hashrate Post by: mrdunns on July 19, 2017, 05:30:23 PM Where do you send the DCR mined, just to a wallet like you would ETH?
Title: Re: ETH + DCR Hashrate Post by: mrdunns on July 19, 2017, 06:34:59 PM Or when you were mining SIa did you send it to a site like bittrex
Title: Re: ETH + DCR Hashrate Post by: Vann on July 19, 2017, 06:47:45 PM Where do you send the DCR mined, just to a wallet like you would ETH? Yes, I use the Decredition wallet. You could also use an exchange wallet address. Title: Re: ETH + DCR Hashrate Post by: pchampn on July 19, 2017, 09:14:15 PM 4 RX 480/580 + 1 RX 570: Code: ETH - Total Speed: 143.610 Mh/s, Total Shares: 256(49+56+50+49+57), Rejected: 0, Time: 01:58 That's a real good hashrate! Have you modded your BIOS, etc. to achieve such hash rate? For my RX 580 and RX 570, I get hash rate of 22 Mh/s and 18 Mh/s. Would appreciate if you can share some details. Thanks. Yes, a simple strap mod using the Uber Mix v3.1 timings for the Samsung memory cards and the 1500 timing copied to the higher timings on the Hynix cards. That with 1150 MHz core clock and a 2050-2075 MHz memory clock with a -96 mV undervolt in Afterburner should get you to 28-29 MH/s with ~920 MH/s DCR for the RX 480/580 cards and ~740 MH/s with the RX 470/570 cards. Thanks. Will try it @ home later today. Btw, while doing the BIOS mod, do you apply them one card at a time, i.e. disconnect all other cards in your rig? Or all other cards can be connected, but only make changes to one card at a time and then restart after applying the mod and patching it and then move to the next card. Just want to make sure, what is the most stable way to mod the GPU BIOS. Title: Re: ETH + DCR Hashrate Post by: Korsakopf on July 19, 2017, 09:33:25 PM Where do you send the DCR mined, just to a wallet like you would ETH? I use the supernova pool (https://dcr.suprnova.cc) where you fill out the payout adress in your account settings. Title: Re: ETH + DCR Hashrate Post by: Vann on July 19, 2017, 09:46:45 PM 4 RX 480/580 + 1 RX 570: Code: ETH - Total Speed: 143.610 Mh/s, Total Shares: 256(49+56+50+49+57), Rejected: 0, Time: 01:58 That's a real good hashrate! Have you modded your BIOS, etc. to achieve such hash rate? For my RX 580 and RX 570, I get hash rate of 22 Mh/s and 18 Mh/s. Would appreciate if you can share some details. Thanks. Yes, a simple strap mod using the Uber Mix v3.1 timings for the Samsung memory cards and the 1500 timing copied to the higher timings on the Hynix cards. That with 1150 MHz core clock and a 2050-2075 MHz memory clock with a -96 mV undervolt in Afterburner should get you to 28-29 MH/s with ~920 MH/s DCR for the RX 480/580 cards and ~740 MH/s with the RX 470/570 cards. Thanks. Will try it @ home later today. Btw, while doing the BIOS mod, do you apply them one card at a time, i.e. disconnect all other cards in your rig? Or all other cards can be connected, but only make changes to one card at a time and then restart after applying the mod and patching it and then move to the next card. Just want to make sure, what is the most stable way to mod the GPU BIOS. If the cards are all exactly the same, then Atiflash will index up to 3 cards at a time. If the cards are different I would do them one at a time and remove all others to make sure you mod the right card. You can leave the cards on the riser to do the Bios mod. After you mod the cards, you will be prompted to restart. Lots of videos on youtube and guides online on how to do it. If you use Windows, after you mod the Bios you may need to use the pixel patcher to disable the Bios signature check, otherwise you will get a code 43 GPU error in Device Manager. https://www.youtube.com/watch?v=IAiScXPisAY Title: Re: ETH + DCR Hashrate Post by: pchampn on July 19, 2017, 10:01:41 PM 4 RX 480/580 + 1 RX 570: Code: ETH - Total Speed: 143.610 Mh/s, Total Shares: 256(49+56+50+49+57), Rejected: 0, Time: 01:58 That's a real good hashrate! Have you modded your BIOS, etc. to achieve such hash rate? For my RX 580 and RX 570, I get hash rate of 22 Mh/s and 18 Mh/s. Would appreciate if you can share some details. Thanks. Yes, a simple strap mod using the Uber Mix v3.1 timings for the Samsung memory cards and the 1500 timing copied to the higher timings on the Hynix cards. That with 1150 MHz core clock and a 2050-2075 MHz memory clock with a -96 mV undervolt in Afterburner should get you to 28-29 MH/s with ~920 MH/s DCR for the RX 480/580 cards and ~740 MH/s with the RX 470/570 cards. Thanks. Will try it @ home later today. Btw, while doing the BIOS mod, do you apply them one card at a time, i.e. disconnect all other cards in your rig? Or all other cards can be connected, but only make changes to one card at a time and then restart after applying the mod and patching it and then move to the next card. Just want to make sure, what is the most stable way to mod the GPU BIOS. If the cards are all exactly the same, then Atiflash will index up to 3 cards at a time. If the cards are different I would do them one at a time and remove all others to make sure you mod the right card. You can leave the cards on the riser to do the Bios mod. After you mod the cards, you will be prompted to restart. Lots of videos on youtube and guides online on how to do it. If you use Windows, after you mod the Bios you may need to use the pixel patcher to disable the Bios signature check, otherwise you will get a code 43 GPU error in Device Manager. https://www.youtube.com/watch?v=IAiScXPisAY That helps, thanks a lot! One more question, for 4 GB RX 470/480/570/580 cards, I should copy 1500 timing and for 8 GB cards, it should be 1750 timings. Is that correct? I noticed that you mentioned for Hynix cards, copy 1500 timing instead, were you referring to 4 GB cards or that also applies for 8 GB cards with Hynix memory? Title: Re: ETH + DCR Hashrate Post by: kriskarthik on October 29, 2017, 05:34:26 AM I just started mining ETH + DCR. I’m running with 8X 1070 in Windows 10 rig. ETH in ethermine.org and the decred is in supernova pool. I’ll let you know my hashrate in couple of hours once it’s stable enough.
Title: Re: ETH + DCR Hashrate Post by: kriskarthik on October 30, 2017, 03:52:38 PM Ok, I’m getting around 235mh for ETH and about 2000 for DCR with my 8X1070 Windows 10 rig. OC is about 100% power, +91 core clock and +512 men clock. But I’m not sure if it Par hash rates.
Title: Re: ETH + DCR Hashrate Post by: preda on October 30, 2017, 04:05:43 PM 6x 1060 3gb they do 131mh eth +1200mh dec claymore instead using nicehash 2.0.0.8 it can push them 135mh eth+ 3100mh dec
Title: Re: ETH + DCR Hashrate Post by: Vann on October 30, 2017, 04:09:27 PM A 1070 should get 30+ MH/s on ETH and ~500 MH/s on DCR dual mining. Try adjusting the -dcri value in the Claymore miner to around 50.
Title: Re: ETH + DCR Hashrate Post by: hebol on October 30, 2017, 04:48:19 PM I'm getting 244 Eth plus 7320 DCR on 8x rx580 dcri 30 in Claymore
Title: Re: ETH + DCR Hashrate Post by: vinodelsol on October 30, 2017, 07:27:04 PM 1 card -sapphire 480 4 gb samsung 30.1 + 880 mhs dcri 29
core 1280 mem 2149 vcore -48 Title: Re: ETH + DCR Hashrate Post by: vinodelsol on October 30, 2017, 07:28:56 PM one card 1060 3 gb palit core +230 mem +910 ----23.3+330 dcri 43
Title: Re: ETH + DCR Hashrate Post by: Schtroumpf on October 30, 2017, 09:05:26 PM 1060 6gb (micron mem)
21.6 Mh/s ETH + 216 Mh/s DCR Title: Re: ETH + DCR Hashrate Post by: Cereberus on October 30, 2017, 09:10:49 PM My GTX 1060 3 GB one Palit and one Gainward do 21.15 Mhash on Ethereum plus about 416 Mhash in Decreed.
My GTX 1070 8 GB Gigabyte does 29.5 Mhash on Ethereum plus almost 500 Mhash on Decreed. Still I would say not worthy as 416-500 Mhash is only worthy 0.16-0.20 USD more but the watt consumption increases a lot more than 0.20 USD per day, at least in my case. When I am dual mining, my GTX 1060 go from 85-90 watt when mining only Ethereum to about 115 watt when I dual mine. Same thing happens with my GTX 1070. That's why I recommend single mining as hash rate is better, 22.5 Mhash for my 1060 3GB overlclocked and 30 Mhash for my 1070. Title: Re: ETH + DCR Hashrate Post by: xxcsu on October 31, 2017, 04:10:08 AM I have one nitro rx 480 / 8Gb on test bench for ETH/DCR mining bios mod test with the lower power consumption as i can go with dual mining.
29.2 - 29.3 MH/s on ETH , 849MH/s on DCR , with 177 watts power usage ( real power at the wall ) , the same time GPU-z reporting 110 watts ... http://beszeljukmeg.com/ETH/eth-dcr.JPG http://beszeljukmeg.com/ETH/eth-dcr-gpuzreport.JPG Title: Re: ETH + DCR Hashrate Post by: patofet on October 31, 2017, 08:07:45 AM I have a rig with several 580 and I have 26mh/s of eth and 700mh/s
Title: Re: ETH + DCR Hashrate Post by: Auponef on October 31, 2017, 08:30:24 AM I have a rig with several 580 and I have 26mh/s of eth and 700mh/s How much is the GPUZ power consumption? |
