|
Title: [WTS] ⚒SOLD! ⚒ ⚒ Antminer D3 Pre-order ⚒ ⚒ ⚒ DASH Bitmain ⚒ ⚒ ⚒ Post by: tw0rak on July 25, 2017, 02:09:10 PM SOLD! For as little as 0.75 BTC I can give you a Bitmain account with an active order for 1x Antminer D3 and 1x 1600W PSU. Shipping 18-25 Sept.
This account has this order not yet paid. You have to pay it USD wire transfer in 3 days. After payment you recieve email and password to Bitmain website account - you can change the password, change delivery address and pay for that order. This sale will be active for 12 more hours. Than Im going to pay for this miner by myself and let it deliver to my house. Title: Re: [WTS] Antminer D3 Pre-order Post by: tw0rak on July 25, 2017, 02:45:49 PM Title: Re: [WTS] ⚒ ⚒ ⚒ Antminer D3 Pre-order ⚒ ⚒ ⚒ DASH Bitmain ⚒ ⚒ ⚒ Post by: tw0rak on July 25, 2017, 04:34:03 PM 1. Specifications of the Antminer D3 are as follows: a) Hash rate: 15 GH/s (Variation of ±5% is expected) b) Power consumption: 1200W (at the wall, with Bitmain’s APW3 PSU, 93% efficiency, 25°C ambient temp). c) Dimensions of the miner: 320*130*190mm d) Hashing algorithm: X11 2. Power consumption figures will vary with your PSU's efficiency, the ambient operating temperature and the accuracy of the power meter. 3. Bitmain recommends use of the APW3++ PSU with the Antminer D3. One APW3++ PSU can not power more than one Antminer D3. 4. To confirm your order, remember to select the payment method after you have submitted your order. 5.The shipping for this batch is expected to start on a first-order-first-ship basis after 18 September for orders that Bitmain has received full payment for. There can be unexpected delays in shipment due to an unforeseen demand. 6. We advise you to research and prepare in advance for the customs' clearance in your country to avoid delays or unexpected costs. 7. All PCIe connectors on a hashing board need to be connected to the PSU for the hashboard to operate. Do not connect more than one PSU to the same hashing board! 8. Separate power supply to control board: there is one additional 6pin PCIe connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner only after all the PCIE connectors are connected to power supply. Title: Re: [WTS] ⚒ ⚒ ⚒ Antminer D3 Pre-order ⚒ ⚒ ⚒ DASH Bitmain ⚒ ⚒ ⚒ Post by: isoneguy on July 25, 2017, 05:08:36 PM You aren't selling computer hardware, you're selling a digital product.
move this elsewhere. Title: Re: [WTS] ⚒ ⚒ ⚒ Antminer D3 Pre-order ⚒ ⚒ ⚒ DASH Bitmain ⚒ ⚒ ⚒ Post by: tw0rak on July 25, 2017, 05:32:09 PM You aren't selling computer hardware, you're selling a digital product. move this elsewhere. Sorry for that. I didn't realize that. I will in few hours cos I'm not at the computer now. Title: Re: [WTS] ⚒ ⚒ ⚒ Antminer D3 Pre-order ⚒ ⚒ ⚒ DASH Bitmain ⚒ ⚒ ⚒ Post by: ottokoester on July 25, 2017, 10:57:31 PM The problem is:
When you do a bank transfer to China bank, we need minimum 3 work days. Last time that I bought my S9, it was a big stress, they expired my order, ... pm sent!!! Title: Re: [WTS] ⚒ ⚒ ⚒ Antminer D3 Pre-order ⚒ ⚒ ⚒ DASH Bitmain ⚒ ⚒ ⚒ Post by: tw0rak on July 25, 2017, 11:25:10 PM The problem is: I have this solved and done multiple times. Thanks for your concerns. When you do a bank transfer to China bank, we need minimum 3 work days. Last time that I bought my S9, it was a big stress, they expired my order, ... pm sent!!! Title: Re: [WTS] ⚒SOLD! ⚒ ⚒ Antminer D3 Pre-order ⚒ ⚒ ⚒ DASH Bitmain ⚒ ⚒ ⚒ Post by: tw0rak on July 26, 2017, 01:55:01 AM SOLD.
Title: Re: [WTS] ⚒SOLD! ⚒ ⚒ Antminer D3 Pre-order ⚒ ⚒ ⚒ DASH Bitmain ⚒ ⚒ ⚒ Post by: wheelz1200 on July 27, 2017, 03:38:17 AM Still avaliable the account? Both the subject the the post above yours says all "sold". Op lock it up |
