|
Title: H110 PRO BTC+ - Treiber & Coin Support Post by: cagrund on July 26, 2017, 11:47:59 AM Hallo zusammen,
für das neue Mainboard ASROCK H110 PRO BTC+ können wir uns hier gerne über Treiber & Coin Support unterhalten. Grundsätzlich sollte ein Frage- oder HowTo-Beitrag immer folgende Informationen beinhalten:
In diesem Sinne, auf gutes gelingen. ;) Gruß Carsten. Title: Re: H110 PRO BTC+ - Treiber & Coin Support Post by: cagrund on July 26, 2017, 12:35:54 PM Ich mache dann mal den Anfang und verlinke alle Windows-Treiber von der speziellen ASROCK-Page:
Windows 7 Hier alle Treiber zum Board für OS Windows 7 x64 --> KLICK (http://www.asrock.com/MB/Intel/H110%20Pro%20BTC+/index.asp#osW764) Hier alle Treiber zum Board für OS Windows 7 x86 --> KLICK (http://www.asrock.com/MB/Intel/H110%20Pro%20BTC+/index.asp#osW732) Windows 10 Hier alle Treiber zum Board für OS Windows 10 x64 --> KLICK (http://www.asrock.com/MB/Intel/H110%20Pro%20BTC+/index.asp#osW1064) Hier alle Treiber zum Board für OS Windows 10 x86 --> KLICK (http://www.asrock.com/MB/Intel/H110%20Pro%20BTC+/index.asp#osW1032) Sonstige Info:
Auszug aus der FAQ: Quote Q: After installing the onboard VGA driver on my 100 series platform with Windows 10, the system keeps on blinking and pops up "Graphics driver stopped responding and has recovered". How can I fix it? (2016/2/1) A: Please set "Package C State Support" to "Auto" in the BIOS. (BIOS -> Advanced -> CPU Configuration -> Set "Package C State Support" to "Auto") Wichtige Hinweise aus anderen Quellen: Unterstützte Betriebssysteme Quote Microsoft® Windows® 10 64-bit (For 7th Gen Intel® CPU) Microsoft® Windows® 10 64-bit / 8.1 64-bit / 7 32-bit / 7 64-bit (For 6th Gen Intel® CPU)* * To install Windows® 7 OS, a modified installation disk with xHCI drivers packed into the ISO file is required. Please refer to page 34 of manual for more detailed instructions. * For the updated Windows® 10 driver, please visit ASRock’swebsite for details: http://www.asrock.com Aus einem externen Board: Quote Topic: Asrock H110 Pro BTC+ 4pin Posted: Yesterday at 12:28am The manual states you have to plug the two 4 pin connectors to the motherboard to support the PCI-E slots, is this really needed if you use powered PCI-E risers? The GPU should draw it's power from the riser and 8pin connectors directly from the PSU. People stated this was not needed on the H81 Pro BTC model. If it's needed can I connect the SATA port from the PSU with a 4pin converter to the motherboard? Can I use just one SATA port or do I need a separate one for each 4pin connector? Bitte auch unbedingt Kapitel 2.7 (S.28 ff. / PDF p. 23 ff.) im Manual beachten! Gruß Carsten. Title: Re: H110 PRO BTC+ - Treiber & Coin Support Post by: cagrund on July 28, 2017, 01:18:43 PM Da es hier ja kein Feedback gibt, mache ich dieses Thema nun auch zu.
Gruß Carsten. |