Title: AsicMiner Blade some easy questions Post by: sinx91 on May 14, 2013, 02:20:41 PM Hello :)
i just bought 2 blades but have some questions about the power supply. I know that i need to connect 4 wires from my psu to the delivered plug. Now my question is, how can this work? I would take a pcie extension and use 4 cables, but in theorie a 6 pin pcie plug can only provide 75 watt, if i use 4 of the 6 cables the blade would only gain 50 watt. Ive seen that a blade needs 70 watt and overclocked Up to 120 watt. Can somone explain me how to provide Enough power from only 4 cables? A other question on the overclocking, i saw it is just Possible to set the clockrate to high. Is there a possibility To bring it higher then the predefined 12,8 ghs @ overclocked settings? The cooling would be no problem. Which voltage can the core handle under air cooling? I will cool it with 2x 120mm scythe ultra kaze@3000rpm with 220m^3/h on heat sink, 1x 140mm fan with 180m^3/h airflow on power module and 1x200mm with 180m^3/h under the blade, to blow air in the chip side. Am hoping for help :) Greetings! (sry for my bad english) Title: Re: AsicMiner Blade some easy questions Post by: dogie on May 14, 2013, 06:40:18 PM PM'ed my guide
Title: Re: AsicMiner Blade some easy questions Post by: pikeadz on May 14, 2013, 06:42:57 PM PM'ed my guide Would you consider publishing it, or if not, pming me as well? Title: Re: AsicMiner Blade some easy questions Post by: dogie on May 14, 2013, 06:52:03 PM PM'ed my guide Would you consider publishing it, or if not, pming me as well? Pm'ed, Powering, cooling, mounting and setup guide is up if anyone here still needs it: https://bitcointalk.org/index.php?topic=205369.0 Title: Re: AsicMiner Blade some easy questions Post by: Aajo on May 14, 2013, 08:38:15 PM link is wrong, should say bitcointalk.org
Title: Re: AsicMiner Blade some easy questions Post by: dogie on May 14, 2013, 08:44:00 PM link is wrong, should say bitcointalk.org Faillink fixed |