|
Title: Underclocking avalon 741 Post by: Zmkarakas on July 31, 2017, 10:02:56 PM Hello,
Is it possible to somehow underclock avalon 741 miner? What I mean is that, I need the machine to run a little quieter, so that it does not make that much noise (neighbours are crazy). I went around the controller interface a little, but I couldn't find anyway to make the machine run at %50 power or something. Thanks Title: Re: Underclocking avalon 741 Post by: NotFuzzyWarm on July 31, 2017, 10:39:02 PM under the config cgminer tab change Vcore from default of 0 to -1 or -2. That will lower core voltage and the Avalon's auto-tuning software which constantly adjusts speed (and works vs Bitmains which is... and only runs at startup) will in turn reduce power used and fans will follow that.
Title: Re: Underclocking avalon 741 Post by: Thetaj on August 15, 2017, 05:25:40 PM under the config cgminer tab change Vcore from default of 0 to -1 or -2. That will lower core voltage and the Avalon's auto-tuning software which constantly adjusts speed (and works vs Bitmains which is... and only runs at startup) will in turn reduce power used and fans will follow that. is there a way to undervolt just specific miners or is this available for only for the whole batch (same controller)? Title: Re: Underclocking avalon 741 Post by: fanatic26 on August 16, 2017, 11:31:19 PM is there a way to undervolt just specific miners or is this available for only for the whole batch (same controller)? You cannot change it individually, the change affects all miners on the chain. Title: Re: Underclocking avalon 741 Post by: Michael20 on August 23, 2017, 05:50:24 AM How is hashrate on -1 or -2 and wattage? Fan speed no way to could run full on undervolt to be cooler?
|