|
Title: Antminer L3+ hashboard issues Post by: Jalapan on August 17, 2017, 09:03:28 PM Hey
i have an issue with 2 of my antminer l3+ , recently some chips start going X on miner status and then are fine when i reboot and will be fine for 10+hours before some go X again. What could this be? i have read that poor PSU could cause it.. my psus are 1650W however then are chinese so i start to question the quality...but 2x psus same problem? Im having a hard time beliving it would happen at the same time with 2 miners. temps are good and below 64degrees celsius, i dont seem to lose hashpower.. not what i can see anyway.. no overclocking done either Any tips greatly appreciated. Title: Re: Antminer L3+ hashboard issues Post by: wolfgangy on October 23, 2017, 07:38:42 PM Hello bro, i have the same problem with my L3+. Starts doing the same issue like yours.. the issue disappear for 3 days and now it lost 1 hashboard. I don't know what's happens the temp it's good... do u solve it?
Title: Re: Antminer L3+ hashboard issues Post by: smoolae on October 23, 2017, 08:45:35 PM Is the PSU You use unbranded and looks something like this:
https://www.ebay.com/itm/AC110-240V-1650W-1-Way-Mining-Machine-Power-Supply-For-Eth-Bitcoin-Antminer-Mine-/132344254784?hash=item1ed0551140:g:dScAAOSww1dZzSi (https://www.ebay.com/itm/AC110-240V-1650W-1-Way-Mining-Machine-Power-Supply-For-Eth-Bitcoin-Antminer-Mine-/132344254784?hash=item1ed0551140:g:dScAAOSww1dZzSi) Or is it a dedicated server PSU/Bitmains PSU? Title: Re: Antminer L3+ hashboard issues Post by: charles2k on October 23, 2017, 10:44:37 PM I have similar problems. After some time one hashboard all xxxxxx Soft reboot does not help, sometimes helped power off/on, but but usually one board will completely disappear.
My PSU is Corsair RM1000, from the wall 805W, each hashboard is on separate PCIE AWG16 cable (2x 6pin) Title: Re: Antminer L3+ hashboard issues Post by: tdlinh87 on October 24, 2017, 02:39:05 PM The chips are damaged, which lead to the entire hash board running abnormal.
Resolution: Remove the hash board to repair. |