Title: help with ASICMiner Block Erupter Blade Post by: stslimited on May 19, 2013, 10:14:01 PM I think my block erupter blade is resetting and not actually doing anything
from ping test: 578 packets transmitted, 545 packets received, 5.7% packet loss Total MHS: 00000 Received: 0000000000 Accepted: 0000000000 Per Minute: 000.00 Efficiency: 000.00% Up Time: 0d,00h,00m,45s Current Server: mining.eligius.st:3334 Clock selected: Low Chip: OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO Title: Re: help with ASICMiner Block Erupter Blade Post by: Caesium on May 19, 2013, 10:23:37 PM They reset automatically after a period of not doing anything as a kind of failsafe.
You can ping it so network looks ok. The loss is probably just it rebooting, wouldn't worry about that for now. You need to use port 8337 for getwork on Eligius: http://eligius.st/wiki/index.php/Getting_Started These blades don't do stratum, I'd recommend a local stratum proxy for optimum performance. Title: Re: help with ASICMiner Block Erupter Blade Post by: dogie on May 20, 2013, 12:16:07 AM https://bitcointalk.org/index.php?topic=205369.0
Title: Re: help with ASICMiner Block Erupter Blade Post by: stslimited on May 20, 2013, 12:37:45 AM They reset automatically after a period of not doing anything as a kind of failsafe. You can ping it so network looks ok. The loss is probably just it rebooting, wouldn't worry about that for now. You need to use port 8337 for getwork on Eligius: http://eligius.st/wiki/index.php/Getting_Started These blades don't do stratum, I'd recommend a local stratum proxy for optimum performance. ohhhh I misunderstood Dogie's tutorial then, I thought stratum proxy = stratum, what is a stratum proxy then, how do I set that up! Title: Re: help with ASICMiner Block Erupter Blade Post by: Caesium on May 20, 2013, 12:39:00 AM http://mining.bitcoin.cz/mining-proxy-howto
Also detailed in dogie's link above :) Title: Re: help with ASICMiner Block Erupter Blade Post by: stslimited on May 20, 2013, 12:53:41 AM http://mining.bitcoin.cz/mining-proxy-howto Also detailed in dogie's link above :) okay, I'm going to pass on the stratum for now, I want to see my 13000 megahashes or at least a sign of it doing something! I changed the server settings and port and still this Total MHS: 00000 Received: 0000000000 Accepted: 0000000000 Per Minute: 000.00 Efficiency: 000.00% Up Time: 0d,00h,00m,20s Current Server: mining.eligius.st:8337 Clock selected: Low Chip: OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO Title: Re: help with ASICMiner Block Erupter Blade Post by: stslimited on May 20, 2013, 04:57:12 AM http://mining.bitcoin.cz/mining-proxy-howto Also detailed in dogie's link above :) okay I got things going, thanks Title: Re: help with ASICMiner Block Erupter Blade Post by: pluMmet on September 16, 2013, 06:22:54 PM This does not seem to work in the server address section:
http://mining.eligius.st:8337 -u <MYaddress> -p x Any ideas? I have these 3 fields: ______________________________________________________ Ports Server addresses user:pass I've tried lots of stuff like these Ports: 8337,8337 Server addresses: http://mining.eligius.st:8337 user:pass: <address>:<password> Ports: 8337,8337 Server addresses: http://mining.eligius.st:8337 user:pass: -u <address> -p x:<password> ______________________________________________________ But it just keeps resetting the Server field to 192.168.1.2,USPA=<address> Title: Re: help with ASICMiner Block Erupter Blade Post by: dawo5010 on September 17, 2013, 12:38:59 AM This does not seem to work in the server address section: http://mining.eligius.st:8337 -u <MYaddress> -p x Any ideas? I have these 3 fields: ______________________________________________________ Ports Server addresses user:pass I've tried lots of stuff like these Ports: 8337,8337 Server addresses: http://mining.eligius.st:8337 user:pass: <address>:<password> Ports: 8337,8337 Server addresses: http://mining.eligius.st:8337 user:pass: -u <address> -p x:<password> ______________________________________________________ But it just keeps resetting the Server field to 192.168.1.2,USPA=<address> Remove the inverted commas! Set the ports to be "8337,8337" Server addressses: "mining.eligius.st,mining.eligius.st" (do not place the ports or the http:// prefix on them) user:pass: "<username>:<password>,<username>:<password>" Title: Re: help with ASICMiner Block Erupter Blade Post by: bbxx on September 17, 2013, 09:06:41 AM dont use pool adress directly!
instead use stratum proxy. Title: Re: help with ASICMiner Block Erupter Blade Post by: rammy2k2 on September 17, 2013, 09:54:06 AM dont use pool adress directly! instead use stratum proxy. this Title: Re: help with ASICMiner Block Erupter Blade Post by: dragonkid on September 17, 2013, 10:33:40 AM dont use pool adress directly! instead use stratum proxy. Just curious, why not? Title: Re: help with ASICMiner Block Erupter Blade Post by: dawo5010 on September 17, 2013, 10:37:35 AM dont use pool adress directly! instead use stratum proxy. Just curious, why not? Stratum has less stales as it involves the worker requesting work from the server, instead of the pool asking the miner if it wants work. It also reduces bandwidth on the pool servers. |