|
Title: Appropriate engine and memclock ratio Post by: fc_flumpker on May 22, 2013, 08:28:02 PM I saw somewhere that with LTC gpu-engine should be below 70% of gpu-memclock. Looking at references for BTC, it seems that most are setting gpu-memdiff to -150 (lower than gpu-engine). Are these both correct for the different coins?
Title: Re: Appropriate engine and memclock ratio Post by: miningdude on May 22, 2013, 09:05:51 PM The optimal engine and memclock varies depending on which coin you're mining and which card you are using. I list my settings (for the 7950 and 7970) in this mining software guide (http://www.coinminingrigs.com/litecoin-bitcoin-mining-software/) (BTC and LTC). You can also check out these two helpful links to see what others are using:
BTC Hardware: https://en.bitcoin.it/wiki/Mining_hardware_comparison LTC Hardware: https://github.com/litecoin-project/litecoin/wiki/Mining-hardware-comparison Title: Re: Appropriate engine and memclock ratio Post by: crazyates on May 23, 2013, 03:31:40 AM Read the CGMiner Scrypt-Readme, and this should explain everything:
https://github.com/ckolivas/cgminer/blob/master/SCRYPT-README Title: Re: Appropriate engine and memclock ratio Post by: fc_flumpker on May 23, 2013, 11:22:39 AM Thanks. Two good references.
|