|
Title: Does anyone have a link to the Elpida Memory performance settings for Polaris ED Post by: Justwondering on September 05, 2017, 05:23:19 PM Hi , I have a Gigabyte my rx480 4GB Elipda, I am looking for the performance settings.
I know I can simply just cut and paste from 1500 upwards , but I am told that is not the best way to get the best results . So does anyone have a link to the Elpida memory performance settings so I can cut and paste it into my bios using Polaris editor. TYI Title: Re: Does anyone have a link to the Elpida Memory performance settings for Polaris ED Post by: Vann on September 05, 2017, 05:26:22 PM Use PBE v1.6. It has a 'one click timing patch' feature that will apply the correct bundled performance timings based on your memory type.
https://bitcointalk.org/index.php?topic=1433925.msg21518785#msg21518785 Just apply the timings, save the Bios and flash it with Atiwinflash. Also back up your original Bios before flashing it. Title: Re: Does anyone have a link to the Elpida Memory performance settings for Polaris ED Post by: Justwondering on September 05, 2017, 05:59:22 PM Use PBE v1.6. It has a 'one click timing patch' feature that will apply the correct bundled performance timings based on your memory type. https://bitcointalk.org/index.php?topic=1433925.msg21518785#msg21518785 Just apply the timings, save the Bios and flash it with Atiwinflash. Also back up your original Bios before flashing it. Wow !!?! So I presume I use ATIwin , save my original bios , run it through PBE , it produces a modded bios , use ATIwin to flash the modded one ? Title: Re: Does anyone have a link to the Elpida Memory performance settings for Polaris ED Post by: Vann on September 05, 2017, 06:02:23 PM Use PBE v1.6. It has a 'one click timing patch' feature that will apply the correct bundled performance timings based on your memory type. https://bitcointalk.org/index.php?topic=1433925.msg21518785#msg21518785 Just apply the timings, save the Bios and flash it with Atiwinflash. Also back up your original Bios before flashing it. Wow !!?! So I presume I use ATIwin , save my original bios , run it through PBE , it produces a modded bios , use ATIwin to flash the modded one ? Yes. Just give the modded Bios a new name when saving it so you don't overwrite the original. You also need to run Atiwinflash as an administrator. I would suggest removing all the other cards from the PCI-E slots and leaving just the card you want to flash to make sure it's the right card. Wait for Atiwinflash to finish and only reboot when it says you can. With most cards, you also may need to use the pixel patcher after modding the Bios to bypass the signature check when using a modded Bios. https://www.monitortests.com/forum/Thread-AMD-ATI-Pixel-Clock-Patcher Title: Re: Does anyone have a link to the Elpida Memory performance settings for Polaris ED Post by: Justwondering on September 05, 2017, 06:49:53 PM Use PBE v1.6. It has a 'one click timing patch' feature that will apply the correct bundled performance timings based on your memory type. https://bitcointalk.org/index.php?topic=1433925.msg21518785#msg21518785 Just apply the timings, save the Bios and flash it with Atiwinflash. Also back up your original Bios before flashing it. Wow !!?! So I presume I use ATIwin , save my original bios , run it through PBE , it produces a modded bios , use ATIwin to flash the modded one ? Yes. Just give the modded Bios a new name when saving it so you don't overwrite the original. You also need to run Atiwinflash as an administrator. I would suggest removing all the other cards from the PCI-E slots and leaving just the card you want to flash to make sure it's the right card. Wait for Atiwinflash to finish and only reboot when it says you can. With most cards, you also may need to use the pixel patcher after modding the Bios to bypass the signature check when using a modded Bios. https://www.monitortests.com/forum/Thread-AMD-ATI-Pixel-Clock-Patcher Perfect thank you I shall give it a try, I presume that 1.6 does not just copy the memory strap and paste it above? Title: Re: Does anyone have a link to the Elpida Memory performance settings for Polaris ED Post by: Vann on September 05, 2017, 07:16:12 PM Use PBE v1.6. It has a 'one click timing patch' feature that will apply the correct bundled performance timings based on your memory type. https://bitcointalk.org/index.php?topic=1433925.msg21518785#msg21518785 Just apply the timings, save the Bios and flash it with Atiwinflash. Also back up your original Bios before flashing it. Wow !!?! So I presume I use ATIwin , save my original bios , run it through PBE , it produces a modded bios , use ATIwin to flash the modded one ? Yes. Just give the modded Bios a new name when saving it so you don't overwrite the original. You also need to run Atiwinflash as an administrator. I would suggest removing all the other cards from the PCI-E slots and leaving just the card you want to flash to make sure it's the right card. Wait for Atiwinflash to finish and only reboot when it says you can. With most cards, you also may need to use the pixel patcher after modding the Bios to bypass the signature check when using a modded Bios. https://www.monitortests.com/forum/Thread-AMD-ATI-Pixel-Clock-Patcher Perfect thank you I shall give it a try, I presume that 1.6 does not just copy the memory strap and paste it above? No. The one click timing patch option applies the bundled performance timings according to the memory type detected for your card. Title: Re: Does anyone have a link to the Elpida Memory performance settings for Polaris ED Post by: devvienuis on September 05, 2017, 10:06:16 PM https://twitter.com/Mirjana8Mirjana/status/905128002861899782
|