Title: Placa video Radeon HD 7950 pe slotul pci-e x1 Post by: lexmedia on May 24, 2013, 07:17:12 PM Mi-am facut un rig cu 3 x Radeon HD 7950 pe sloturile pci-e x16 si mai am slot x1 liber, as vrea sa mai pun inca o placa pe acel slot.
A incercat cineva? Am inteles ca este riser pentru pci-e x1 to pci-e x16. Se gaseste si la noi sau ati comandat de afara si a functionat? Cred ca latimea de banda este de ajuns pe pci-e x1 pentru mining, nu trebuie mai mult dar vreau sa fiu sigur inainte sa imi mai comand inca o placa video. Astept sugestii :) Multumesc anticipat! Title: Re: Placa video Radeon HD 7950 pe slotul pci-e x1 Post by: lexmedia on May 24, 2013, 07:22:19 PM I don't speak spanish.. but I recommend using a powered x1 to x16 riser ribbon cable! thank you for the quick reply! i have 3 x radeon hd 7950 on the system now on the x16 pci-e slots. will it work if i add one more in the pci-e x1 slot? will they work all together well? Title: Re: Placa video Radeon HD 7950 pe slotul pci-e x1 Post by: lexmedia on May 24, 2013, 07:32:59 PM I don't speak spanish.. but I recommend using a powered x1 to x16 riser ribbon cable! thank you for the quick reply! i have 3 x radeon hd 7950 on the system now on the x16 pci-e slots. will it work if i add one more in the pci-e x1 slot? will they work all together well? No prob! Yes, you should be able to add that 4th card in without any issues at all. I sometimes have driver issues when adding cards (need to uninstall cards, then do a fresh install) but that's the only prob I have. thank you, i sent you a pm, can you tell me if that riser is good? Title: Re: Placa video Radeon HD 7950 pe slotul pci-e x1 Post by: Cyrus on May 24, 2013, 07:34:23 PM I don't speak spanish.. but I recommend using a powered x1 to x16 riser ribbon cable! Well, it's not quite Spanish, it's Romanian(being the Romanian board and all), but both have a latin root.. so good eye for that :). And yes, you're right, using a x1 to x16 riser will do the trick, a powered one be recommended. Ca sa o zicem si pe romana... da, un riser alimentat x1 la x16 isi va face treaba. De gasit, nu prea gasesti ieftin pe la noi: http://www.okazii.ro/cautare/riser+x1.html?fuzzy=0&autoc=write asta la prima vedere. Despre ce riser este vorba? Title: Re: Placa video Radeon HD 7950 pe slotul pci-e x1 Post by: lexmedia on May 24, 2013, 07:48:50 PM I don't speak spanish.. but I recommend using a powered x1 to x16 riser ribbon cable! Well, it's not quite Spanish, it's Romanian(being the Romanian board and all), but both have a latin root.. so good for that :). And yes, you're right, using a x1 to x16 riser will do the trick, a powered one be recommended. Ca sa o zicem si pe romana... da, un riser alimentat x1 la x16 isi va face treaba. De gasit, nu prea gasesti ieftin pe la noi: http://www.okazii.ro/cautare/riser+x1.html?fuzzy=0&autoc=write asta la prima vedere. Despre ce riser este vorba? riser alimentat nu am vazut printre cele de pe okazii |