|
Title: Power supply won't work on my mining rig nothing powers up Post by: whzzkid on September 08, 2017, 04:07:00 PM Can someone help me with this issue. I don't know what is wrong. I changed power supply nothing. I reset the breaker nothing. Nothing works totally dead. What could be the problem? I had everything running ok until this happened. I turn off the power supply to reset the motherboard because nothing was showing up on the monitor so I was going to reboot it. Now nothing works.
Title: Re: Power supply won't work on my mining rig nothing powers up Post by: jackg on September 08, 2017, 06:34:41 PM Can someone help me with this issue. I don't know what is wrong. I changed power supply nothing. I reset the breaker nothing. Nothing works totally dead. What could be the problem? I had everything running ok until this happened. I turn off the power supply to reset the motherboard because nothing was showing up on the monitor so I was going to reboot it. Now nothing works. Do you have a hard drive/SD card that you use to store the mining software on and the OS, is that fully functionary could you attempt to replace that and see if it works? Are there any status lights on the motherboard that aren't what they usually are when you power the rig up? Title: Re: Power supply won't work on my mining rig nothing powers up Post by: xIIImaL on September 08, 2017, 06:36:09 PM Can someone help me with this issue. I don't know what is wrong. I changed power supply nothing. I reset the breaker nothing. Nothing works totally dead. What could be the problem? I had everything running ok until this happened. I turn off the power supply to reset the motherboard because nothing was showing up on the monitor so I was going to reboot it. Now nothing works. First this is a mining related thread which should move on the mining or mining support section to get the better assistance. Whenever you buy a miner you need to check and buy the good PSU for the miner which suits for it. I hope the below article will rid out our issue. Please find it. http://cryptomining-blog.com/tag/power-supply-issues/ If does not works move this thread to the above mentioned section to get better help. Title: Re: Power supply won't work on my mining rig nothing powers up Post by: fanatic26 on September 08, 2017, 09:16:53 PM Have you tested PSU output with a multimeter to make sure power is getting to the motherboard?
http://aphnetworks.com/tutorials/psu_paperclip_trick See the link to find out how to turn the PSU on while it is not connected to anything. |