Bitcoin Forum

Bitcoin => Mining speculation => Topic started by: Didley1JT on September 08, 2017, 11:13:24 PM



Title: PDU Preferences?
Post by: Didley1JT on September 08, 2017, 11:13:24 PM
So I'm getting the 220V line installed early next week.

The receptacle will be an L6-30. I would like to go from that to a PDU that would be running two 2400W power supplies. Each 30A circuit will be running up to 4 Avalon 741s in the future), putting the max load at about 22 amps.

I've seen APC and Tripp Lite with a host of range as far as ratings, cost, and features.

What are you guys using and what have you had good/bad experience with?


Title: Re: PDU Preferences?
Post by: btc-haze on December 30, 2017, 10:19:39 AM
im running 4x S9 with this with no issues

https://www.amazon.com/dp/B0001N9W8C/

but its pricey, I am looking at other alternatives now, seems like 2nd hand used may be the way to go



Title: Re: PDU Preferences?
Post by: MarkAz on December 30, 2017, 12:09:08 PM
I've used these in the past, and are slightly cheaper than the first one:

http://amzn.to/2CsSwi0

But as btc-haze pointed out - it's hard to beat eBay and picking up used ones on there.  The only thing I would want you about is if you're getting a smart PDU with power cycling, etc - I picked up a bunch of Tripp-Lite ones a while back so I could do remote rebooting when needed, and the stupid things only have a relay on one leg of the power.  Net result is that with some of the better server power supplies will continue to operate even if one leg goes down.


Title: Re: PDU Preferences?
Post by: gurugarzah on December 30, 2017, 03:23:27 PM
I haven’t used these or purchased from them *yet* but I am willing to give it a shot.

http://www.priceblaze.com/e7681a.html?ref=gshp&gclid=EAIaIQobChMIjtqczOqS2AIVwVuGCh1NLgH3EAkYAiABEgKcVPD_BwE




Title: Re: PDU Preferences?
Post by: alred911 on December 30, 2017, 04:20:41 PM
im using this
price is in CAD

no need to pay the electrician for the 220V outlet.

https://www.kijiji.ca/v-view-details.html?adId=1323428549


Title: Re: PDU Preferences?
Post by: MarkAz on January 04, 2018, 03:23:33 AM
I haven’t used these or purchased from them *yet* but I am willing to give it a shot.

http://www.priceblaze.com/e7681a.html?ref=gshp&gclid=EAIaIQobChMIjtqczOqS2AIVwVuGCh1NLgH3EAkYAiABEgKcVPD_BwE

Strange setup - haven't seen one like this before.  Keep in mind the C19 plug it's being fed by is typically only rated to 16A, so even though it says it's a 30A PDU, the cable they're using is only rated for a bit over half that.  Personally I'd avoid this and go with something that actually can support the breakered load - L6-30 is what you're looking for in terms of input cable.


Title: Re: PDU Preferences?
Post by: gurugarzah on January 04, 2018, 04:15:37 AM
Yeah after looking into it, it appears it tries to achieve some
Funky “fake 3 phase power” <- honestly don’t know what else I could say to explain my understanding of it.
With two 20 amp breakers or something.



Title: Re: PDU Preferences?
Post by: the_electronrancher on January 05, 2018, 04:53:35 PM
I got some used ones by server technology for $70 on eBay.  Sentinel, they're awesome.  My units are at a data center so I use it to log in and check power, power cycle units, etc.  Highly recommended if you're running remotely.



Title: Re: PDU Preferences?
Post by: taserz on January 10, 2018, 02:14:33 PM
You need this: https://www.amazon.com/gp/product/B010KNVZ0A/