Title: D3 miner power needs? Post by: costapete on September 09, 2017, 02:34:02 AM AWP+++ provides 1200w at 110v and 1600w at 220v
is dedicated circuts 110v 15amp breakers for each AWP+++ runing a single D3 or 220v with two AWP++ running two D3 on one 20 amp breaker a better plan?? Title: Re: D3 miner power needs? Post by: costapete on September 11, 2017, 01:25:33 AM bump?
Title: Re: D3 miner power needs? Post by: trinitrate on September 11, 2017, 01:49:48 AM bump? In the long run, the more 220 circuits you can start using the better off you'll be. 220 x 20A = 4400watts. de-rated to 80% for 100% duty cycle = 3520 continuous watts of load on a single circuit. 2 D3's and an L3+ would put you at about 3200 watts. on the 120 / 15A route, 1440 watts per circuit max, so one miner per circuit no matter what. Title: Re: D3 miner power needs? Post by: PWillz on September 11, 2017, 04:46:37 AM AWP+++ provides 1200w at 110v and 1600w at 220v is dedicated circuts 110v 15amp breakers for each AWP+++ runing a single D3 or 220v with two AWP++ running two D3 on one 20 amp breaker a better plan?? May I ask how you intend to deal with the heat generated? |