Bitcoin Forum

Hi

I'd like to introduce our Mining-Pool at https://coinfoundry.org (https://coinfoundry.org)

What differentiates us from most other pools, is our quickly responding an friendly support, our active community and perhaps a fresh and less generic approach to UX. We hope that our near flawless reliability track record combined with lower than average fees might convice you to give us a try. We'd be glad to welcome you aboard!

Summary

• Running on dedicated servers with multi-Gigabit peerings
• Run by experienced staff with years of experience managing complex systems
• In-house developers maintaining and improving pool code
• Coins: Monero (https://coinfoundry.org/pool/xmr), Bitcoin Gold (https://coinfoundry.org/pool/btg), Ethereum (https://coinfoundry.org/pool/eth), Ethereum Classic (https://coinfoundry.org/pool/etc), Bitcoin Private (https://coinfoundry.org/pool/btcp), Litecon (https://coinfoundry.org/pool/ltc), DASH (https://coinfoundry.org/pool/dash), ZCash (https://coinfoundry.org/pool/zec), Verge - Blake (https://coinfoundry.org/pool/xvg2), Monacoin (https://coinfoundry.org/pool/mona), Vertcoin (https://coinfoundry.org/pool/vtc), Bitcoin Cash (https://coinfoundry.org/pool/bch)
• Pool Fee: 0.1% (introductory offer)
• Payout System: PPLNS
• Payouts: Hourly
• Newbie friendly support on UserEcho (http://feedback.coinfoundry.org/) and Twitter (https://twitter.com/coinfoundryorg)

If you have questions or suggestions, feel free to drop me a line here or on Twitter (https://twitter.com/coinfoundryorg) or join the pool's Support-Channel (http://feedback.coinfoundry.org/).

https://coinfoundry.org/img/miningpoolstats-ad-new.png (https://coinfoundry.org)

Miners contributing to the next block will receive a Bonus from the Pool's wallet.  ;)

There will be a short website maintenance today at 13:00 GMT. Pool operation should be unaffected by this.

Pool Web-Frontend updated with some requested features such as per-worker hashrate stats.

how this can be seen i don't find any option to see this per worker or per rig status

also with the last block found and payment done tx are not showing in stare ant where

Nice to see that you put some work into your pool.
However there are a few rough edges for me i want to elaborate:
Minimum payout of 0.5 dash is kind of a show-stopper for me.
Being able to customize it makes sense but even a D3 needs 3 full days until payout.
If there is one in 3 days, becasue your hashrate is low right now.

You've got some valid points there. Payout limit has been adjusted and payout limit customization is in the works. Thanks for your constructive feedback!

We did an extra payout round on the Monero pool (https://poolmining.org/pool/xmr) to reward the loyal miners staying with the pool till the first block. You rock!  :)

hi i can see you using this code https://github.com/coinfoundry/miningcore but problem is they don't provide user ui file the website file ..do you suggest any to use this code and ui also or we have to develop our own user ui code / website

also this muitlcoin pool . i mean do all code and demon will be install in this same server or we have to each coin in separate vps and then link the api to website ui ?? i am not getting it

I've answered on Github.  ;)

DNS issues have been resolved and we switched to a more reliable DNS provider.

We did an extra payout round on sunday to ease the waiting time for our miners: https://twitter.com/coinfoundryorg/status/914540169289699328

Due to the low number of shares contributing to our first DASH Block, our top miners will receive a bonus of 0.1 Dash each. Thanks for your support. You rock!

what is profit fee for the miners?

Profit fee? Do you mean the pool fee?

NiceHash boost incoming for our Monero Pool. Coins earned by boost account will be distributed to our miners.

Dedicated Pools for Ethereum (ETH) (https://poolmining.org/pool/eth), Ethereum Classic (ETC) (https://poolmining.org/pool/etc) and Expanse (EXP) (https://poolmining.org/pool/exp) have been added to the cluster. Looking forward to see you on the pool.

We are hard at work to have a BTG pool up and running on launch day at https://poolmining.org. Please check back on launch day - assuming the BTG developers are able to hit their deadline of 25th October.

Due to the rising popularity of the currency and the relative scarcity of international pools for this coin, we've just added a Monacoin Pool to our family of pools: https://poolmining.org/pool/mona

hello, i'm going to mine Dash soon, and my hosting is located in Malaisia.  Is it ok to mine with you, as you are quite far from Malaisia?  

Is distance of any importance, in fact?

Distance is of some importance that's true. You should simply test out if you get any rejects with our pool and if you don't (which is what I assume), then you're fine. Welcome aboard!

Our Vertcoin Pool (https://poolmining.org/pool/vtc) is now up along with the rest of our pool family. Happy mining and welcome aboard!

Our Bitcoin Gold Pool is now open for business at https://poolmining.org/pool/btg.

Welcoming ZCash (https://poolmining.org/pool/zec) to our family of pools.

An influx of new miners due to the rising popularity of the currency has drastically reduced block times of our Dash Pool (https://poolmining.org/pool/dash). Thanks for your ongoing trust and support!

Reaching out to Monacoin/Vertcoin Miners looking for profitable pool.

We have quite a beefy peering to asia through our upstream provider so I don't see much of a problem for that.

Happy Thanksgiving to everyone and thanks for your support!

Hi,
I've a few questions - I'm finding pool for MonaCoin (actually using Suprnova, but there are problems with mining).

a) So, can I use more rigs with one wallet address or must have worker suffix?
b) I using official MonaCoin Core wallet - there gets wallet address. Is it correct?
c) Are there some monitoring for miners where I can check hash rate, earned coins etc?

My config:

Thanks for advice,
hurvajs

More detailed status pages for miners are being worked on. For now the most important stats are always available at the "My Stats" section of the pool page. Just enter your wallet address and you're fine.

Due to popular demand we've added an AEON Pool (https://poolmining.org/pool/aeon) - https://poolmining.org/pool/aeon

I'm new to mining using ccminer. (Been only using Nice Hash in the past)

I just woke up and checked out the "My Stats" section after leaving the process running overnight. Currently, it is reporting at 166.9 MH/s. I have 7 x 1080 Ti's running, each doing about 60 MH/s according to the consoles. 6753 shares. 0.115 MONA balance. Paid out 0 MONA.

How should I interpret this? I was expecting MUCH higher hashrate and MUCH higher balance...

Thank you.

Why is the Stats reporting so low??

Hashrate    133.1 MH/s
Shares   8520

Been mining for more than 3 days now.

hey ya.
my d3 cant connect it was fine for last 8 hours.
now
0 stratum+tcp://dash.poolmining.org:3062 <wallet>.rig1 Dead
is there another pool backup i should go to?

rebooted all 5 units same thing.

You guys having issues?  share count is way off and i'm getting connection errors on mona and vtc...

things look like they are back operating properly.

I have been mining for about 8 hours and it says my balance is still 0? I thought this was an hourly payout?

https://i.imgur.com/WVWL3jq.png

is it possible to lower the payout of dash? 0.1 is high ... 0.01 maybe?
check litecoinpool ...

because during the last 8 hours, the pool doesn't find any block ...

The Dash payout has been lowered to 0.03 effective immediately.

Both our Electroneum (https://poolmining.org/pool/xmr) Pool and the Monero Pool (https://poolmining.org/pool/xmr) now support SSL/TLS.

Pool fees lowered accross the board.

We've rebranded our pool operation under the umbrella of the coinfoundry.org unit. Please update your miners to point to <pool>.coinfoundry.org from now on. Existing miner configurations will continue to work for at least a year.

Second stratum server added to keep up with the influx.

Our Dash Mining Pool now supports SSL/TLS connections on port 3063. Happy mining.

ZClassic (https://coinfoundry.org/pool/zcl) and Zencash (https://coinfoundry.org/pool/zen) pools added on request. Happy Mininig!

GoByte (https://coinfoundry.org/pool/gbx) pool added per request. Happy Mininig!

Added Bitcoin Private Pool (BTCP) information page in preparation for upcoming hardfork: https://coinfoundry.org/pool/btcp

Been mining ZCL for several days with an average hashrate of 2.6KSol/s, but the balance still shows 0. Like wtf? Also, how on earth do I know, what shares round they're currently cycling or when I can expect to be paid?

There's no wtf. You should read up on how pools work. Pools only pay out when a block is found. There are not many people in the pool, so the finding of blocks is very inconsistent right now. We also have a support forum where questions like yours are much more likely to get noticed earlier than here on BCT.

https://feedback.coinfoundry.org   

Our US-Eastcoast, US-Westcoast servers are now up. The Tokyo Server has been brought online as well, serving Crypto-miners in Northeast-Asia, Southeast-Asia and Oceania.

I am new to mining. After I made the set up last week. As of now I am mining eth with the nanopool. As I have checked the mining pool review on Cryptocompare I found your pool rating higher than all and fee also seems little low.
I am using perfectmine os to monitor and manage the mining rig. Just checked the stratum config from your website and added the pool.

My queries are below,
Still I am sure why my rx 470 cards are not hashing only for this pool?
How to check the dashboard with the eth address I have in your site?

Thanks for your kind attention.

Could you send an email with the pool your attempting to mine on and the wallet address you are using to contact@coinfoundry.org? I'm sure we'll get that sorted.

Thanks for the reply. Sure I will send an e-mail today to this given address.

Our Bitcoin Cash pool is now up serving as a reliable alternative to the chinese mining monopoly: https://coinfoundry.org/pool/bch

Just looked at your config generator for xvg blake2s. There’s no option for AMD GPUs!!! Do you have a grudge against them or are you incompetent?

Of course, the latter.

We've added Ravencoin (https://coinfoundry.org/pool/rvn) and Pigeoncoin (https://coinfoundry.org/pool/pgn) Pools due to popular demand.

Our Bitcoin Diamond (https://coinfoundry.org/pool/bcd) pool is now available as well.

coin foundry LTC seems down


/

gateway error ...

no payments in long long time ..


(october  !!))

thx in advance