|
Title: Win 10 claymore ETH 6 GPU 1070 FE - Reboots When Mining Starts Post by: Zempa on September 18, 2017, 09:26:08 PM I built this rig a month or so ago, been running fine at 197 MH/s.
Suddenly, it just reboots as soon as I start Claymore. I've tried different batch files, all the same. I've reduced all settings on Afterburner, doesnt matter. I tried wiping the GPU drivers and reinstalling, I've installed the beta version of Afterburner, all the same. When I was able to see errors in Claymore it would say it couldn't find the temperature of the GPU's and shut down. I'm at a complete loss and about to just sell this system on Ebay. No time for these little quirky random issues. Any idea what is causing this? Title: Re: Win 10 claymore ETH 6 GPU 1070 FE - Reboots When Mining Starts Post by: Marvell2 on September 18, 2017, 09:26:56 PM Mostly likey you dont have enough power for the intital fire up, disable 3 of the cards and try clamore to see
Title: Re: Win 10 claymore ETH 6 GPU 1070 FE - Reboots When Mining Starts Post by: Zempa on September 18, 2017, 09:28:33 PM Corsair HX1000 Platinum.
Ran fine for over a month, why would it not be sufficient now? Title: Re: Win 10 claymore ETH 6 GPU 1070 FE - Reboots When Mining Starts Post by: bearsworth on September 18, 2017, 09:33:38 PM Corsair HX1000 Platinum. Ran fine for over a month, why would it not be sufficient now? It should be sufficient, but you should rule things out. What is your oc settings and what power limit for the gpus? Try testing each gpu and do what the guy before mentioned. Title: Re: Win 10 claymore ETH 6 GPU 1070 FE - Reboots When Mining Starts Post by: Johny101010 on September 18, 2017, 09:39:10 PM More than likely one of the modular power cables it slots. Had the same problem more than once.
|