Bitcoin Forum

whattomine.com says that GTX1070 should get 35500 kh/sec , I'm only getting 16000 per 1070. Anyone knows where i can get a better miner ?

What miner do you use?

alexis-1.0 is good enough for lyra2v2

You can try also alexis-1.1_palginmod

40-42Mhs.

What miner are you using now? What are your miner settings? What's your GPU temp?

A lot of miners have an "intensity" setting. If that setting is set too low, it will limit your mining speed. Incrementally increase that setting until you're happy.

I suggest you get MSI Afterburner to monitor your GPU temp, voltage and fan speed.

Also, sometimes increasing the memory clock of your GPU can give extra 10-20% speed boost. Increasing the core clock speed (overclocking) will also boost performance. <-- I don't recommend this unless you know what you're doing and you have sufficient cooling.

I have like 6 different ccminer mods, tried them all. Some give more, but suprnova won't report more than 16Mh/s per 1070

haha, thanks, but I'm pretty confident in what I'm doing, just need the name of ccminer mod that's able to achieve hashrates suggested by whattomine.com they have been pretty accurate when it comes to other algos

with alexis-1.0 i get 60MH/s at TDP 55% using 1080Ti. So u can definitely get 40 in 1070, Try it

I'm having trouble locating alexis-1.1_palginmod can anyone provide a link?

Thanks!

Strangely enough, when I use ccminer Alexis-1.0 or Palginmod the pool (ahashpool in this case) only shows half the hashrate. Is the reported hashrate distorted or am I really submitting half the shares that I should be?

EDIT: in addition to this, I seem to get a high amount of rejects (invalid job id)...

I faced the same issue on yiimp.masterhash.us

Half the hashrate and 22% Reject rate, got half the coins too  ;D ;D ;D

following this thread.

i have tried using ccminer but it has been developed with piece of crap, amateur engineers, all the readme.txt is littered and infested with donation address yet, fucking thing does not even build.

Prebuilt binary fucking throws out the error message when run from linux with some sort of cudalibart missing. I only deliberately spend at most half hour knowing that the linux software like this amateuristic nature  has tendency to wear out people's patience and after I purposely decide to quit after setting the appropriate env variable, it was still not working. What they release is a piece of junk that should not be out there in the market and being advertised.

I am looking for a reliable linux miner like the ones used in ewbf for xmr, vert and possibly other ones.

I use VTCminer pushed out by vertcoin team. Much more efficent even with the 2 percent fee

do they support linux version? If i remember correctly they dont.

I dont remember off the top, but the good news is that it is all open source, especially considering it is all on their git - it makes it easy to build from source if you like.

LOL mind you, Open source is crap, it rarely builds and expensive in term of time and effort.

I get 39-42 Mhash of Lyra2Rev from a single GTX 1070, power limit 70, memory clock +600 , core clock +200 are my settings on a Gigabyte Windforce OC GTX 1070 card.

I am using 1.8.5 Legacy Nicehash Miner, Windows 10 with all updates, latest drivers and disabled onboard audio, and audio drivers and codecs plus printing ques. Hope this help.

Is there any more efficient miner now?