|
Title: USB Erupter help needed Post by: joae1975 on June 05, 2013, 08:42:35 PM Noob here. I have a new/used Asus on Windows 7. Trying to ruin cgminer-nogpu. Plain Cgminer won't run. It says:
Icarus detect <1:5> failed to initialise <incorrect device?> USB init, open device failed, err -12, you need to install a Windows USB driver for - AMU device 1:5 Icarus detect <1:5> failed to initialise <incorrect devise?> I tried to follow all the other thread's instructions. All the read me files. Some things didn't make any sense to me, couldn't do what they were saying. What does all this mean above? What should I do? Thanks!! Title: Re: USB Erupter help needed Post by: af_newbie on June 05, 2013, 08:51:48 PM Noob here. I have a new/used Asus on Windows 7. Trying to ruin cgminer-nogpu. Plain Cgminer won't run. It says: Icarus detect <1:5> failed to initialise <incorrect device?> USB init, open device failed, err -12, you need to install a Windows USB driver for - AMU device 1:5 Icarus detect <1:5> failed to initialise <incorrect devise?> I tried to follow all the other thread's instructions. All the read me files. Some things didn't make any sense to me, couldn't do what they were saying. What does all this mean above? What should I do? Thanks!! Use bfgminer 3.0.2 or cgminer 3.1.1 Title: Re: USB Erupter help needed Post by: joae1975 on June 05, 2013, 09:14:06 PM Tried to run bfgminer, it says "The program can't start because libcurl-4.dll is missing from your computer. Try reinstalling the program to fix this problem."
How do I do that? When I run cgminer, it says ".....OpenCL.dll is missing..." What should I do? Delete everything and start over? Reformat? Title: Re: USB Erupter help needed Post by: os2sam on June 05, 2013, 11:35:20 PM Noob here. I have a new/used Asus on Windows 7. Trying to ruin cgminer-nogpu. Plain Cgminer won't run. It says: Icarus detect <1:5> failed to initialise <incorrect device?> USB init, open device failed, err -12, you need to install a Windows USB driver for - AMU device 1:5 Icarus detect <1:5> failed to initialise <incorrect devise?> I tried to follow all the other thread's instructions. All the read me files. Some things didn't make any sense to me, couldn't do what they were saying. What does all this mean above? What should I do? Thanks!! Post in the CGMiner thread so Kano and ckolivas can see your question/problem. Title: Re: USB Erupter help needed Post by: os2sam on June 05, 2013, 11:37:08 PM When I run cgminer, it says ".....OpenCL.dll is missing..." The CGMiner for no gpu says that? I have read ckolivas to follow the BFL ASIC readme for use with the block erupters. Title: Re: USB Erupter help needed Post by: joae1975 on June 06, 2013, 12:07:59 PM When I run cgminer, it says ".....OpenCL.dll is missing..." The CGMiner for no gpu says that? I have read ckolivas to follow the BFL ASIC readme for use with the block erupters. Title: Re: USB Erupter help needed Post by: Welsh on June 06, 2013, 12:11:08 PM When I run cgminer, it says ".....OpenCL.dll is missing..." The CGMiner for no gpu says that? I have read ckolivas to follow the BFL ASIC readme for use with the block erupters. There are multiple youtube videos which walk you through setting them up, I won't post any because differnet people learn different ways, there's a few on there, so pick the one you understand. There are complete noob ones to slightly advanced guides. I think there's youtube videos which walk you through usb hubs, power consumption. Some videos went into a lot of depth if you have the time to look at them. Most of them use cgminer have a FAQ in the description explaining common problems. Title: Re: USB Erupter help needed Post by: byronbb on June 07, 2013, 02:16:13 AM Here's the commandline for mine running on 50btc. bitaddress is my address and password duh... COM11 is where the miner is connected to my computer. Check out http://rdmsnippets.com/tag/install-block-erupter-on-windows-7/ for more details.
Code: cgminer-nogpu.exe -o pool.50btc.com:8332 -u bitaddress -p password --icarus-options 115200:1:1 --icarus-timing 3.0=100 -S //./COM11 Title: Re: USB Erupter help needed Post by: joae1975 on June 07, 2013, 02:43:47 AM Here's the commandline for mine running on 50btc. bitaddress is my address and password duh... COM11 is where the miner is connected to my computer. Check out http://rdmsnippets.com/tag/install-block-erupter-on-windows-7/ for more details. Thanks bro! Seems like I'm having registry issues. My geek friend is going to fix it tonight via web meeting. I'm a mac boy and I bought a used Asus online. I did something to it, for shame.Code: cgminer-nogpu.exe -o pool.50btc.com:8332 -u bitaddress -p password --icarus-options 115200:1:1 --icarus-timing 3.0=100 -S //./COM11 Title: Re: USB Erupter help needed Post by: Xer0 on June 18, 2013, 07:03:59 PM same problem here - it's not detected by cgminer, bfgminer or bitminter
but it runs fine on a netbook which has windows xp too... Title: Re: USB Erupter help needed Post by: joae1975 on June 18, 2013, 08:24:12 PM I reformatted and all is fine.
|