|
Title: Unable to successfully connect my ant miner l3+ Post by: vapeminer280 on October 14, 2017, 12:13:23 AM Help. Total noob here. I’m in need of a little tech support. I received and unboxed my ant miner L3+. I followed all instructions to connect it to the power supply and ethernet cable. I fired her up and she runs like a charm. However, the problem starts when I try to enter the IP address into my browser. Both chrome and safari are unable to open the ant miners configuration page. It seems like my network does not recognize my antminer. Using an IP scanning app the antminer appears on the discovered devices but doesn't show up on the connected devices my router configuration page. This is all very frustrating. If any of you out there are willing to share your expertise it would be greatly appreciated. I’d possibly be willing to compensate for you time. PM me if interested. Thanks again.
Title: Re: Unable to successfully connect my ant miner l3+ Post by: akirasendo17 on October 14, 2017, 01:01:24 AM check your configuration maybe you miss something or, maybe port check for the website on their site that may help u alot
Title: Re: Unable to successfully connect my ant miner l3+ Post by: xxcsu on October 14, 2017, 01:06:02 AM if its connected to the router it should be on your router list , the default settings is DHCP for the miner , so you going to get the first available ip address for your L3++
What ip adress are you trying to put into your browser ? "Using an IP scanning app the antminer appears on the discovered devices " then get that device ip address , and put that into your browser . Download Bitmain IP reporter from here (https://shop.bitmain.com/support.htm?pid=00720160906053730999PVD2K0vz0693) Title: Re: Unable to successfully connect my ant miner l3+ Post by: nitego on October 14, 2017, 01:30:31 AM If everything fails follow this Youtube video. It really help me set up mine.
https://youtu.be/e07eW6-rBPI Title: Re: Unable to successfully connect my ant miner l3+ Post by: fireballs98 on October 14, 2017, 01:39:41 AM yeah, maybe your got wrong ip address. here is how to fix them:
first: you download this tool: https://shop.bitmain.com/support.htm?pid=00720160906053730999PVD2K0vz0693 then you connect your computer and your l3+ on the same network. run this tool above and click "Start". also push "Report IP" button on your 3+. you will receive an ip address. if you dont receive any ip address, try "Reset" button, and then reboot your l3+ and reScan ip again. you will receive your l3+ IP. go to this ip on your browser with user: root, pass: root finally change your pool and user! good luck!!! :D :D :D |