Title: Solo Mining Megacoin with Antminer L3+ Post by: xavinash4ux on October 21, 2017, 07:20:28 PM I am having a hard time trying to understand this and setting it up. I just bought an Antminer L3+ and am trying to mine Megacoin or say any scrypt Coin for that matter. I have a Megacoin Wallet installed on Windows Computer and running it in -server mode. I have a megacoin config file with these parameters:
Users\Name\AppData\Roaming\Megacoin\megacoin.conf rpcuser=wallet address rpcpassword=pass rpcallowip=192.168.0.3 (This is the local ip of the computer running the wallet) rpcallowip=192.168.0.4 (This is the ip address of my Antminer L3+) rpcallowip=127.0.0.1 rpcport=7950 port=7951 rpckeepalive=0 server=1 daemon=1 Listen=1 gen=0 algo=scrypt (pooler-cpuminer) Miner bat file: minerd -a scrypt -o http://192.168.0.3:7950 -u wallet address -p x --coinbase-addr=wallet address (Antminer L3+) pool connect setup http://192.168.0.3:7950 -u wallet address -p x Now just for testing purpose when i use pooler-cpuminer to see if all this connects and Mines, it does. The Miner connects to my wallet and i can see hashes. I installed the Miner on the same computer as the wallet, it works, i installed the miner on a different computer and tried to connect to the computer that has the wallet, it works, so far so good. Now the same i insert in the Antminer L3+ configuration and start the miner , it reads as pool is Dead. It fails to connect. What am i doing wrong ??? can someone please help me to understand this Title: Re: Solo Mining Megacoin with Antminer L3+ Post by: lmatrading on October 21, 2017, 07:36:51 PM Hi using www.prohashing.com you can mine scrypt and receive payment in megacoin.
Title: Re: Solo Mining Megacoin with Antminer L3+ Post by: xavinash4ux on October 21, 2017, 07:49:35 PM thanx for ur reply but For that matter i can use any pool, but that not what i want. I want to Solo Mine to my wallet
Title: Re: Solo Mining Megacoin with Antminer L3+ Post by: rwrayen on October 21, 2017, 07:54:29 PM thanx bro :)
Title: Re: Solo Mining Megacoin with Antminer L3+ Post by: belaweb2 on October 21, 2017, 08:01:41 PM Good question... I would be interested too in a solution.. THX
Title: Re: Solo Mining Megacoin with Antminer L3+ Post by: wavelengthsf on October 21, 2017, 11:16:27 PM You need to setup a stratum proxy for your Antminer to connect to.
Something like this - https://github.com/CryptoManiac/stratum-mining-proxy Title: Re: Solo Mining Megacoin with Antminer L3+ Post by: xavinash4ux on October 22, 2017, 12:43:34 PM On your link there r 2 download links:
Download official Windows binaries (EXE) from http[Suspicious link removed] or http[Suspicious link removed] Link: http[Suspicious link removed] < --- dosent work link: http[Suspicious link removed] < --- http://blockpg.prod1.shp.mcafee.com/blockpage/?ref=d28e5062b22e97cd7fad9849b75aa0d1 is there any other way ?? since ur talkin about a Stratum Proxy ? do u think i can use a BFGminer and use it as a proxy ? Title: Re: Solo Mining Megacoin with Antminer L3+ Post by: xavinash4ux on October 22, 2017, 01:25:29 PM I tried to use a BFGminer as a stratum proxy, i get this error:
gn94V5S5Qa4rSARNh9LXHa Password: x [2017-10-22 09:22:28] Press any key to exit, or BFGMiner will try again in 15s. [2017-10-22 09:22:43] blktmpl error: Unrecognized block version, and not allowe d to reduce or force it [2017-10-22 09:22:43] Pool 0 slow/down or URL or credentials invalid [2017-10-22 09:22:44] No servers were found that could be used to get work from . [2017-10-22 09:22:44] Please check the details from the list below of the serve rs you have input [2017-10-22 09:22:44] Most likely you have input the wrong URL, forgotten to ad d a port, or have not set up workers [2017-10-22 09:22:44] Pool: 0 URL: http://192.168.0.3:7950 User: MA7xnavKLf8q gn94V5S5Qa4rSARNh9LXHa Password: x [2017-10-22 09:22:44] Press any key to exit, or BFGMiner will try again in 15s. Title: Re: Solo Mining Megacoin with Antminer L3+ Post by: igotek on October 22, 2017, 01:49:39 PM Good question... I would be interested too in a solution.. THX I m looking for solution for it. Title: Re: Solo Mining Megacoin with Antminer L3+ Post by: wavelengthsf on October 22, 2017, 03:01:54 PM Here's another one to try:
https://github.com/npmdoc/node-npmdoc-stratum-solo I mainly setup these things on *Nix servers, so I don't try to setup on Windows much. Title: Re: Solo Mining Megacoin with Antminer L3+ Post by: xavinash4ux on October 22, 2017, 04:34:48 PM is there a step by step guide on how i compile and/or install this on windows ?
Title: Re: Solo Mining Megacoin with Antminer L3+ Post by: xavinash4ux on October 23, 2017, 09:08:03 PM can someone compile a BFGminer to run as Stratum Proxy on windows ??
i can pay .. Title: Re: Solo Mining Megacoin with Antminer L3+ Post by: TurnTable904 on December 08, 2017, 08:11:45 PM Good afternoon xavinash4ux, did you happen to get this working?
I am having a hard time trying to understand this and setting it up. I just bought an Antminer L3+ and am trying to mine Megacoin or say any scrypt Coin for that matter. I have a Megacoin Wallet installed on Windows Computer and running it in -server mode. I have a megacoin config file with these parameters: Users\Name\AppData\Roaming\Megacoin\megacoin.conf rpcuser=wallet address rpcpassword=pass rpcallowip=192.168.0.3 (This is the local ip of the computer running the wallet) rpcallowip=192.168.0.4 (This is the ip address of my Antminer L3+) rpcallowip=127.0.0.1 rpcport=7950 port=7951 rpckeepalive=0 server=1 daemon=1 Listen=1 gen=0 algo=scrypt (pooler-cpuminer) Miner bat file: minerd -a scrypt -o http://192.168.0.3:7950 -u wallet address -p x --coinbase-addr=wallet address (Antminer L3+) pool connect setup http://192.168.0.3:7950 -u wallet address -p x Now just for testing purpose when i use pooler-cpuminer to see if all this connects and Mines, it does. The Miner connects to my wallet and i can see hashes. I installed the Miner on the same computer as the wallet, it works, i installed the miner on a different computer and tried to connect to the computer that has the wallet, it works, so far so good. Now the same i insert in the Antminer L3+ configuration and start the miner , it reads as pool is Dead. It fails to connect. What am i doing wrong ??? can someone please help me to understand this Title: Re: Solo Mining Megacoin with Antminer L3+ Post by: goodgryphon on April 02, 2019, 01:42:34 PM I am trying the same thing, mining solo on a L3+...
using bfgminer I did some solo mining years ago but cant seam to get it to work now. would love to know how to solo with this miner, but until then Prohash FTW. |