Bitcoin Forum

Hi da WWW


We have made a custom optimised ccminer.

It's working with lyra2z algo, mining Zcoin aka XZC.



All the public released binary are having troubles with lost shares and hashrate report showing way less than the miner hashrate.

Also real income is lowered than expected with the math prediction or whattomine calculator.


So WE FIXED THAT :)

Our rev is showing same on ccminer and pool reports.
Income has been raised by 15%.


Selling this coin for 0.02 BTC



PM for information and order.

Here are my 24h graphs.

1st phase

https://i.imgur.com/cse9O3X.jpg



2nd phase

https://i.imgur.com/JAfRf1I.jpg



3rd phase

https://i.imgur.com/58DjIhy.jpg


So as you can all see, our MOD is slightly better and as far as I can see, earnings are a bit better by 15% in the end with our Mod.


Screenshot taken with (21 x 1070 nvidia) (2x 7 gpu rig + 1x 6 gpu rig + 1x 1 gpu test rig)

power comsuption is 1850w (for all of these, out of the wall hardware monitoring)

https://i.imgur.com/hGU7sAA.jpg   <= one 7x 1070 gpu rig (the 2nd on the miningpoolhub screenshots)

Ccminer shot for one 7x 1070 GPU rig

it's the second one on miningpoolhub screenshots.

https://i.imgur.com/hGU7sAA.jpg

Hashrate for 1080TI ?.

I don't know I haven't any 1080 in my handz.


It fix the hashrate loses problem with all other ccminer.

I found that 2.7 MH/s for a 1080 120w

Ok, that's my 4x1080ti rig :

https://imgur.com/a/J2INX

I'm planning to get more cards and if you can improve that significantly, i'll be interested.

Thanks for your job!.

well, have you noticed a difference between your real hashrate and reported one on the pool dashboard and monitoring ?

Also using whattomine preddiction, are you close to what it says ?

If one of these are going wrong (should be both) then you should use our mod that will fix that.

This is a screenshot of miningpoolhub :

https://imgur.com/a/7VyFy

The improvements of your version are only from reporting, or you can improve the real performance?.

also fix title of thread, not just miner :D
Its xzc not zxc

well it makes the hashrate value more stable as no more lost share.

Can't tell the secret of the miner, but it definitely works better profit than tpruvot 2.2.2 public release.

Also power sucking out of the wall is very very nice compare to other cryptos.




Yeah thx I fixed the title :)

Is there any gain with suprnova? What is your hashrate for 1070?

CCminer does 3.2MH/s at 140W.

with miner ccminer_cuda9 (https://github.com/djm34/ccminer-msvc2015/releases/)
I'm getting 13.03MH/s with 4 x 1080ti(pl: 70%, core: +130 me: -502)
With this your miner you guarantee me at least ~17MH/s(increase of 30%)???

Nah it won't give you 30% more hashrate.

It will make all your hashrate more efficient, cause ccminer usualy have a 30% loss compare to profitability calc.

This miner fix the loss so you will earn 100% of your hashing.

Just try it and you will see.


Benefit is working on both suprnova and miningpoolhub and any other xzc pool.

Using -i 19


1070 are running at 92w and temperature is very cool.
having 1800 khash per card.

So its basically this public miner: https://github.com/djm34/ccminer-msvc2015/releases/

But you are trying to sell it for more than 120$?

don't feed scammers ))

nah this is a different version.

I have to test this rev you post, I never trid it.

So we can compare.

What you are saying has already been done and is availible for free.

The trick was "submit stale share"

djm34 version's already done that. https://github.com/djm34/ccminer-msvc2015/releases/tag/v0.2.1 (https://github.com/djm34/ccminer-msvc2015/releases/tag/v0.2.1)
tpruvot's 2.2.2 must use "--submit-stale" to work as well.  https://github.com/tpruvot/ccminer/releases/tag/2.2.2-tpruvot (https://github.com/tpruvot/ccminer/releases/tag/2.2.2-tpruvot)

I'm testing, lets wait for an hour and then I will post dashboard and monitor screenshot.

Wait and see.

told you...

If the pool accepts stale shares, it's a bad configured pool, you're getting paid for work which is obsolete...

You'd better check why your pool is paying less with many coins comparing to other respected pools even if they have larger fee like yiimp.


Also I didn't receive any explanations or even excuses for all lost several day mining work with SweepStake coin on your pool.

yes, some pool are definetely not playing it fair

thats why we must mine in suprnova with @ocminer

What is OCminer ?
And why suprnova as it's has only 10% of miningpoolhub hashrate.

ocminer is the propietary of suprnova, and the hashrate the pool detects is higher than mph.
And the hashrate is irrelevant as long as the pool finds blocks each  X hours (x = 4 at the moment)

one block per 4 hours ?

What the hell ?

I won't leave MPH for that ^^

where is the difference at the end of the month?

what do you mean ?


Also

After few hours testing the dj public rev using cuda 9, I'm still waiting to see if it's really the same as the one we made.


Let's see tomorrow graphs.

For now, the one we made is getting better results, way more stable than DJ (got one rig that crashed, it really don't often happens, I relaunched it within a minute), but lets wait for tomorrow graph.

Need few more hours to be sure about it.

I would say real +15% improve with a more stable hashrate (that actualy works with the pool, not only hashing for nothing).

To be honest, I'm getting the exact same hashrate for free, for a month now.

Here are my 1070s. Screenshot taken a few mins ago.
Around 1750 per card.

https://i.imgur.com/NeDr6Qi.png

Can you please take a screen of your mining chart on pool ? and your earnings aswell ?

Past 24h would be fine.

will post mine tomorrow.

To show difference between tpruvot public binary, my mod, and dj mod.

Well, I cant because I have many different rigs pointing at zcoin, and I would not stop all of them for 24h+ just to see how much does one earn.

Here is what one of my 1070 rigs is doing (6 cards):
https://i.imgur.com/iFtbu2i.png
That is roughly 1 coin daily.

many thank for ur CCminer xzc mod version.
Donn't care some word from anyone . Yuu do the best but they didn't understand.
Ok...First  - this miner not increase ur hashrate
....Second - this miner not help your confirmrate coin still 120 the same
.....But - this miner helping u for invalid hashrate =/+,- 0-1%

Rb8111 thank you for feedback.
What card are you mining on, please can you remind me ?





Here are my 24h graphs.

1st phase

https://i.imgur.com/cse9O3X.jpg



2nd phase

https://i.imgur.com/JAfRf1I.jpg



3rd phase

https://i.imgur.com/58DjIhy.jpg


So as you can all see, our MOD is slightly better and as far as I can see, earnings are a bit better by 15% in the end with our Mod.

i'm ready to give it for free to someone ready to vouch for it working after testing it.


of course someone with a good rep on the board.

I guess you have to offer the mates from previous page with high reputation and who showed some interest
but I thin the price you are asking is rather high for a such small improvement
maybe it is better to make it free but with some small donat like 1-2%?

 

That's a thought :)



But seems like not much people are looking for it.

Good for me mining xzc

Ok, I'm a senior member here and I'm mining zcoin, give it to me and I'll do a test.

Please keep in mind that ccminer is licensed under GPL, which means that while you are free to modify and distribute as you please (even sell it), anyone you distribute your modified version to must also receive the source code, including your modifications. Otherwise, you're in violation of the terms of the license, and could be liable to the copyright holders.

Are you actually getting one coin daily from that rig?  I understand that you run more than the one rig, but assume you can extrapolate to make a conclusion.
I'm well behind that.  With ~10mh (6x1070) I'm bringing in around 0.6XZC/day on Suprnova; MPH was worse at ~0.5.

Yes definetely getting at least one xzc per rig per day, more like 1.3 actualy.


I didn't knew about the rules for open sources.

Thanks you for telling me that.

But how SP doesn't show the details of the tweaks ?




Bulletdodger, you have discord ?

I send you a PM with a discord invite so I can share you the miner.

I'm willing to test it and post a review.

Here's how I'd test:

Use 1 8x 1080Ti rig. Run djm cuda 9 on 4 GPUs, and your mod on the other 4 GPUs on separate workers. All GPUs are running at the same settings, 1900MHz/-502MHz VRAM, and the system has perfect uptime. I'll post graphs of the reported hashrates every 12 hours or so for at least 72 hours, and probably for up to 1 week.

If you're interested, PM me.

hi, can you tell me which pool do you use for mining Zcoin? I'm trying to mine on NOVA but this quite a nightmare, there is no block for 10-12 hours straight!
this is awful  >:( and I don't like how MPH is performing, it counts hashrateas basically 20% less then is in fact? maybe there is another pool?

yeah! I really need new pool with good hashrate for that coin, I'm using multuhub now with djm miner
so I can test your miner if you want  8)

Lot of people want to try it, but none is ready to pay for it.


Did you ask the same to SP ?

Hey, sorry for late reply - my discord if f'd up, I cannot open your invitation,
can you pls use telegram or some other app?

I'm willing to do a simple test with all my rigs, or one of them, to compare the results I got before.

Lately my earnings fell, I think because of rise of difficulty.

hey! I want that miner too, but even with higher hashrate on nova pool, poor miners trying to find a block " Time Since Last Block    14 hours 15 minutes 22 seconds"

really? who needs good miner if there is no good pool&!!! is there another good pool?

Well I only know MPH and all the hashrate is there.


Anyway, with that miner your earnings will be better (on MPH)




Bulletdodger

I only use discord, why you can't connect to it ?

Ok, I gave it to bulletdodger for free.


Hopefully he will post his results.



Kind regards.

the price is rather high for me, but I'll wait for the test result from other good and respected members to confirm your figures.
and I think that 2% or 1% of developer fee is also a good and working option.. maybe you may consider..

Yes will see in near futur.

Working on an improoved one for this same algo.

Cause it's really eco friendly on power sucking, and I love that.

Sure we can improove that.


We are going to set a new pool that will be optimised as much as possible for each algo.

Thank your for noticing!
In this field people do not care about licenses and this is pretty bad.

Have someone (maybe with a good known reputation) tested this miner and can confirm that they are not scamming?

1080 ti is the card that gives the most out of Lyra2Z algo and if you want max results mining this coin, you`ll need few of them ;)

We must move all our hashrate to suprnova

It's too much unbalanced.

If MPH get DDOSS attack, it will be the end for xzc miners.



Profitable mining has become a rare thing :)

A complexe workout to be at the right place.

Can anyone share the result of working and earning of gtx 1080 ti with open source?

it depends on the pool mostly, on nova there is difficulties with finding blocks, i saw like 14 hours without a block, which is awful
on MPH there is good tome for block finding but lower hashrate like for 10-20%
and as far as I know there is no other pools avail  :(

If your modifications are valuable enough, I may be willing to purchase them. You'd have to give me the source code - but - if they're good enough, I'd have no incentive to share it (which would just increase difficulty), and I have no obligation to share it.

Nah no other pool available.

it sucks pretty much.


Anyway, wanted to say that we wont' sell the optimized miner to much people, only 10 people, and really hope that they will play the game and don't share it too much so it' won't kill the mxzc mining game.


I already sold one so there's only 9 left.


Regards.

You can get this fix for free, don't be so silly and pay for it.

If you join the zcoin slack channel, ask in there and you will be given a link.

We did the miner, so I don't think so that you can find it on board or discord.

I gave it to only 2 people by now.


And we won't give it more than 10 people.

3/10 sold

7 left to order, after that it will be closed, waiting for a new rev that will be improved.


Of course the one who supported the first rev will get the second for free.

What kind of settings are you using to get that?  I'm not even getting to 2.5 on my 1080.  also not getting anywhere close to 140w.  how do you force that?>

Use afterburner, there's plenty of tutorial on how to set it up for your graphic cards.


It's the basic, not overburning GPU, and optimising "hashrate efficiency" / "power usage" ratio.

At some point, all the watts it is using, and burned for a very tiny bit of better hashrate, not WORTH it at all.

Find the best point.


A 1080 should be around 140 150w max, and I don't know about 1080 Ti, probably different settings.

so, you gave the miner for testing, right?
may I ask for result?  if there is something to show?

cause yes, the coins itself a nightmare to send to exchange  and for mining but even with that difficulties seems good profits

If I read your screenshots correctly you're getting 1730khs on your 1070s. I don't have "mod" and I get 1789khs. Good luck to those who pay for this Sp_ inspired mod. Sorry, I would make Sp_ upset if I compared him to this charade. At least he improves stuff.

Well yes some people should be able to post result soon enough hopefully.


Anyway, only 5 miner left.



Haters can think whatever they want, buyers know that it's just working great.


You just compare hashrate value, and well yes, have to admit that, since we upgrade to 3.88 drivers, hashrate's been a little lower, but real earnings have been just pumped up.

More global hashrate but more income for the miner.
So hashrate is good, "when it's 100% efficient".


Also, every new xzc should move to suprnova.

It's way better income.

I'm not a hater, we all gotta make money somehow. But besides hashrate, share rate, stale or rejected you don't really have a lot of factors to make a miner more profitable.

Well we checked for few days now, it's getting more earnings with our rev.


And if you are happy with your actual mining, good for you :)

My 1080ti rigs crash after few hours with this error

"unspecifid launch failure"

any idea what's wrong?

Getting more than 4 usd per 1070 GPU   / day.


Using our XZC Mod.

must be one card getting overbuffed or something.

Reduce your OC settings.

Try to redownload the miner and recopy it.

Sometimes, corrupted copy are making such things happening.

Suprnova xzc mining with 21 GPU (1070) (power limit 60%)
using XZC Mod miner.

Started @ 00h30, so approximately 9h range til now, with a 0.5 xzc incoming on next block.

Do some Maths :)


https://i.imgur.com/Uf52ctw.jpg

Now I'm even more confused. I mined for 18 hours with 7 GPU @ 75% tdp and got 0.85205611 zxc. You have 3x the GPU power, choked by 15% less tdp but you only mined marginally more within a 9 hour window. This all does not add up.

Ahah

Check our miner, that's it.



Maybe there's no feedback cause they don't want to share it to other people ^^

Also reported hashrate has been really upped.

Peaks @ 50mh, with initial 36mh value.
Alsmost constant peak.

so will be there any update from the member who took the miner for free and for testing?
cause it is interesting to hear independent party  ::)
i'm not saying that your miner is not good enough, but I would like to hear  from other people that it is really good.

Yes I'm sure they will, some told me they will post graphs.


I can't force them to do it .

Ill post some results after full 24hours of usage your miner. There are high winds in my place already, and electricity sometimes turns off, so they are not realiable for this moment.
But for me it looks very good :)

I thought zcoin was adding mtp which is supposed to be cpu mining only or am I wrong just wondering

Well nah it's working with GPU just fine.


Zerocoin is working with AMD if I'm correct, but not nvidia yet.

No stable miner.

Hey guys,
so I went ahead and tested the modified ccminer, and I must admit - I am getting better results!

I mined with 2x 1070s, core +190, mem - 300.

First I mined with modified cc miner and I got 0.3 coins in 24 hours,
and then I mined 28 hours (I was working and forgot to turn of the miner) with old cc miner and got 0.61 coins total.

Which means at 24 hours it was probably 0.58 coins total.

Speed with OLD miner: around 3450 khs total
Speed with NEW miner: around 3500 khs total

I can upload screenshots if you guys want.

Thanks

I am sorry but there must a mistake somewhere, maybe you/your pool just got lucky in that 24 hour period.
An hashrate of 3500 Kh/s even considering no fees and no bad shares will produce ~0.3239 XZC per day given the current difficulty, you can try it for yourself http://whattomine.com/coins/175-xzc-lyra2z?utf8=%E2%9C%93&hr=3500.0&p=300.0&fee=0.0&cost=0&hcost=0.0&commit=Calculate (http://whattomine.com/coins/175-xzc-lyra2z?utf8=%E2%9C%93&hr=3500.0&p=300.0&fee=0.0&cost=0&hcost=0.0&commit=Calculate) https://www.crypto-coinz.net/crypto-currency-statistics/ (https://www.crypto-coinz.net/crypto-currency-statistics/)

So if you are getting an higher profit that means that either you have a much higher hashrate (and ccminer and the pool are reporting it wrong  ???) or you've made some mistakes in the calculations


I would suggest a 48h period.
Also could you tell us what kind of ccminer (and what parameters, like the intensity) you are using for comparison?

During that time period the difficulty changes every block, and your pool has different luck, etc.

A fair test involves pointing separate cards at each pool at exactly the same time

It's based on tpruvot.

-i 19 for xzc mining.



yes I agree, it was about the pool luck, for the outstanding earnings.

Anyway, the miner is working great with this algo.

Ok, guys - I agree, I'll see if I can run 2 rigs in parallel.

Can you possibly explain that bit?
Why would suprnova be "way better income" than miningpoolhub? I've been happy with MPH so far... auto-converts to BTC and auto cash-out is nice and cheap...

because MPH is getting too much hash, if someday it get attacked, all the xzc network will be touched.

And that's not good at all for long therm stable decentralisation.


If suprnova could get half of what MPH gets now, which is like 85% of the global hashrate, it might be a good thing for everyone.

Also many people are saying that MPH is having fun with the number (man got too much power in handz)

This is all nice and all from a hash distribution perspective but does not mean you get "way better income" by switching to suprnova...

supernova cheating as well,  for about 20% so it almost the same here, not a big difference for that pool
the mph has such a big commission to withdrawal and possible cheats with hashrate(

it is a pity there is now another pool  >:(

We are actualy working on a new pool.

News incoming as soon as possible.

I was charged 0.0003 BTC for the automatic withdrawal last week at MPH. Don't consider that anywhere near "big". Do they charge more if you withdraw the Zcoin directly?

we made more tests today.



A good 0% fail with our MoD    vs    19% fail with DJ MoD.



5 copy left.

Yes I confirm the results.

Still showing 0% when the other one is showing 15~20% fail.

I am testing 21.5 mh with opensource ccminer, pool - efficiency with pool - 100%, but looks like effective hashrate ~15% lesser than i can see in the miner by 15%, If you send me miner first - i can test it and paste comparsion here.

Hi

Thank you for offer, but I already send it for free to bulletdodger.

I won't give more free copy as people can just spread it for nothing already.

Most profitable coin today xzc

Hey guys,
so do you want me to do some more testing?

Just tell me what kind of setup do you want and I can try it.

I'd love for you to test a 1080ti on MPH (another pool is fine but MPH has like 80% of the network hashrate so you shouldn't have problems running a test for 24hrs only) with that miner and another 1080ti on the same pool with djm miner with an nvidia driver older than 388 because that version is apparently giving some problems.

I am currently having over 5 xcz per day with 18x 1080ti and I want to know if there can be an improvement.

Thanks

Ok I'm gonna do it from now.


Just give me time to setup the whole test protocole.

With 1070, bothexact same GPU serie. Bought at same time, always been used the same way.



One on DJM and the other on XZCMod

Read PM, pls.

replied.

I just moved all my miners to the modded ccminer, I see immediate improvement on one msi armor 1080ti rig,
it gave me average 15.3 mhs, now it is giving 16.01 mhs, big difference if you ask me. I never ever got over 15.7 on that rig, in over 1 month I've been mining it.

I'll see how it works from now on.


EDIT:
ummmm MPH web doesnt work:

"Error 1016 Ray ID: 3b70a3d2afe72774 • 2017-11-01 17:40:34 UTC
Origin DNS error"


EDIT2:
it works fine now.

6 x gtx 1080ti just 15M? It's nothing! At http://yiimp.eu/bench?algo=lyra2z&chip=0 we can see single 1080ti card with 3,9Mh (*6=23,4).

6x 1080ti rig, miner shows 3050-3150kh each card 18.6mh total, 0% rejected shares, on mph it's practically the same on the graph.
DJM showed me higher hashrate, something like 19mh total, but on mph graph was not stable, and 10-15% rejected shares.
The same with my 1060rigs, hashrate in miner a bit lower, but no rejected shares and higher earnings.
Earnings are 15% higher as op is claiming, very good miner ;)

5x1080ti, with what card can you get 3.9 mhs?

I tested like 4 different cards and never got hash that high.

Just wanted to leave a review for this miner.  I currently have 20 nvidia 1070's core clocked to +150 core / -500 mem 60% Power Limit.  I too am seeing +15% earnings compared to the dj mod and much more compared to the regular cc miner.  Reported hash rate from the miner are very close to what the pool reports unlike the other miners.  Below are some screen shots of the miner and pool hash.  I did have a 7 card rig go down for 2 hours or so, which was due to stability testing at +175 core.

http://prntscr.com/h547dc

http://prntscr.com/h547gd

Thank you all for report.


4 copy left.

3 left Copy

-------------------------------------------------------------------
Name:   holdre85
Posts:   2
Activity:   2
Position:   Newbie
Date Registered:   October 29, 2017, 05:57:40 PM
Last Active:   Today at 05:29:21 PM
--------------------------------------------------------------------
rig of 20 gtx 1070, registered 4 days ago. Kalymist are you ?? :D

Yes sure you can think I'm shillin the thread.

But I'm not. No need at all.

I know what the miner worth about the shares.

Is anyone else showing MORE hashes on the pool than on your miner?  I'm using a different modified miner and seeing at least 25% more on the pool.  Mining on Suprnova with 6x 1070 and 3 x 1080ti.  Miner shows around 19m/h total, but I'm averaging ar 25m/h.  I've only been running this setup for a couple days, so too soon to see if the net coins reflect the hashrate shown.

Yes; almost constantly having more reported share than miner actualy do, and earnings are better than with pubic version.

profit for 2x1080Ti? , who can tell me?

I feel sorry for people who are paying for this.

can you offer affordable alternative? what it will be?
ccminer no stale option, does not working as described
15% improvement is good, but right now the higher difficulties eat up all those better hasrate (
and the coins is not the best any more.

Value will be back up :) just don't sell now. wait for better value.

i mean we already talked about it in the official zcoin slack channel.

https://image.ibb.co/mFUmkw/zcoin_ccminer.png

The diff is up on zcoin. :(

I am making way less than I did a month ago, even with the optimised miner etc.

Yes it's not good.

Should move to something elese when diff is going too high.

But it will drop back when going to high :)

Yeah, I dont know.
But I'm hodling and hoping for a massive price pump in the future (when they announce the nodes news).

What else is profitable these days? Vertcoin I guess.

VTC is doing good on the chart, don't know for GPU mining.

Vertcoin is gpu minable, but anyways, I'll still stick with zcoin for some time.

2 left copy.

After these we will just stop selling the miner.

how about profit of 1080Ti? or hashrate of 1080Ti? Who can tell me?

http://whattomine.com/coins/175-xzc-lyra2z
and
http://yiimp.eu/bench?algo=phi&chip=0

i mean we already talked about it in the official zcoin slack channel.

https://image.ibb.co/mFUmkw/zcoin_ccminer.png

[/quote]
how did you do that? with wich miner? is it because of no stale option for ccminer?
or it is something else?
can you share please, if not here then PM?
appreciate the answer!

Yes we firstly modified this stale share settings.


But we also check the whole code to adapt all of it to this settings.



It just works with a 0% fail share.

As soon as I try the DJM verson, it's going to up to 20% fail share.



Probably just a cuda and Visual studio compatibility version thing.

Around 3000kh/s, a bit more with proper overclock settings.

with higher diff which is about 28% higher then before and lower price for the same 20-25% I highly doubt it is a good time to mine this coin now
so maybe it better to mine more profitable coin and if need this coin exactly just buy it?

Hi

Yeah sure it's a good way to optimise earnings.

But anyway, nothing is flat, I mean, all diff are oscilliating :)


You need to jump from one to another, with the best mining settings (miner and OC) to get the best out of it.

still 2 left copy.

 ::) can you share one last copy for free  ::) ::) ::)

And return money to buyers?

Come on, I already gave it for free to bulletdodger.

wops... difficulty skyrocketting!!!, not profitable at all :(.

Zcoin is become botnet controlled coin?
Seems that Zcoin network more than on 50% controlled by large botnets (10-15Gh's ones) and more than 90% of NetHash sitting on one pool. And devs don't even care abot

Yes diff is going high, but shouln't last for long, or maybe coin value will just raised on it's own.

diff has fallen already, and price went waaaaay up

why he should be closing the pool, he got his fees he is happy...

so u test it ? how is the miner really ? 

I repeat : It's working great with lyra2z XZC mining.

Showing a perfect 0% fail share, when DJM goes for almost 15% fail some times.

Don't spend time to repeat. You said you are a Cuda developer, so improve the code further.

Cant believe people are still falling for this, you can get it for free from zcoin slack.

Can you help me? I can not join zcoin slack, can you give me the link to the miner?

would appreciate that aswell

someone could please send an invite to the Zcoin slack or the link to that free miner with the fix.
thanks

Your link is the DJM version.

Come on, are you all stupid or what ?



Since the begin we are facing our miner with the famous DJM one, supposed to be fixed.


But it's not, only our miner is fixing for real this stale share things.


Just try out the DJM, you'll see it's making lots of fail share.


Our doesn't.


Anyway, call me whatever you want, mining is a personal thing :)

And you are all making me reapeting myself.

But it's like, it's not even possible in your head, so what can I do for you anyway, if you don't trust anything.

yes cuda 9

VS 2013


x86

As XZC value is going up.


We decide to add 5 more miner to people.




AVAILABLE Xzc miner   =   5 .

my 1060 3gb does 1050kh is that good? or i could do more?

It can do a bit more yeah.

what are you settings ?

I used to overclock the 1060 pretty much :

vcore +0
power limit +70
gpuclock +185
ramclock + 550 (samsung)
fan 75 ~ 80 %


If you get some fail share on MPH, our miner will fix that.

With the djm34 version these are my results :

https://imgur.com/a/CSoPq

Can your miner get better results?.

I have a rig of 5x1080TI and other with 4x1080TI, in that photo you can see the result of my 5x1080ti rig.

Hope the shop is closed - 10 copies sold.

It should be pretty much the same if you don't have any fail share.

I am making a mod now. Look's like my mod can do more than 2000 Khash on the gtx 1070. I will be adding a 2% fee and a buyin. I hope to complete the optimized miner in a few days.
See my thread for updates.

wating  :D
thanks

We are also working on few new miner for different algo (nvidia & linux)

and there will be a good surprise with it ;)

when will the news be?

i already get this rate on my 1070 maybe i consider it if it went higher.

Very soon.


Devs are working hard on it.

I never understood this fuss about invalid optimiser.......
My customized miner is already working without any invalid on pool side mph. :)

Yes with some setup, DJM is doing just fine.
And his trick is pretty easy to set.


Anyway, we are working on few other algo now, also optimising this lyra2z

hey there , what is the "trick" behind seting up DJM miner ? Can you please tell me , I am newbie :)

just read github :)

Link ?

i'm trying to find that trick, can you share the link ?

Seriously ?

Can't help you if you can't even find tpruvot and djm github ^^


Come on, not hard to find.

I've found that github links, but I can't find the trick, i will check it again.

I will try this :

https://github.com/djm34/ccminer-msvc2015/issues/23

But it will decrease the performance, now i'm using -i 21 .

Yes new miner, algos and optimizations are much appreciated ... always...... Good luck. ;)
Any thought about m7m for CUDA..........

As m7m is pretty isolated algo, it's not our priority, but let's add it to the bucket list ;)

Use tpruvot 2.2.2 and add --submit-stale to bat file. It will help 0% invalid shares.
Remember add --submit-stale, if you don't, your hashrate will be lower 40-50%  ;)

Thx!, i hope djm34 will add that option to his optimized version.

I was about to say...
That option isn't there on DJM's Cuda9 miner unfortunately...

Hi!
Im using ccminer_cuda9, but the profitability IN COINS has dropped by 20% yesterday compared to the day before. What happened?
Diff is the same, pool is the same, nothing changed...

Who wants to trade sp modded miners!! I have spmod-tribus, skunk, xcn cryptonite and cryptonight pascal...i can trade with lyra2z, bitcore, hsr...I will send all the miners from the original e-mail from sp himself so no viruses.

Were you on miningpoolhub ? Yes, I noticed that too. Hopefully it's not only on miningpoolhub, it's a shame if it is.
BTW, I switched to another pool.

Switching to another pool has no sence as 80% of the network power is at MPH. Allthe rest will find blocks too rarely.

Supposedly, if you stick to one pool with decent hash rate long enough, the payout would be more or less the same amount.
In my case, why mine in a pool if you sense something was off with the payout.

edit: I'm not saying MPH skimming the payouts, but it was obvious the payouts was off.

Which is true if you plan on mining XZC over the long term and never switching.  The problem starts when you decide you want to change coins, or your rig goes down, you name it.  At that point if you haven't mined a single coin yet, it was all done in waste.

Donc take not original SP mods.


It's all full of virus.

all i have is the original mail of the miners from him and they are archved as 7z.

if someone exchange with me the xzc miner then i will give all my spmods for free..which makes 5 of them..

plz tell me
why i have only 55W of 120W used power with the xzc ccminer?
http://slimer.su/55.jpg

I don't think SP sold xzc miner out.

Compiled latest version 0.0.2-djm34 with added --submit-stale param from ccminer 2.2.x
Built with VC++ 2015 and nVidia CUDA SDK 9.0, packed upx -5

http://www.mediafire.com/file/l32h3oebkhxpp46/
https://ufile.io/9ioas

with --submit-stale my hashrate = MPH hashrate

p.s.
This programm is provided "as-is", use it at your own risk.
If you are afraid any viruses - don't use it

could you provide any benchmark with 1060 or 1070?
what is the devfee?
regards!

no fee, original djm34 source-code, only added --submit-stale param.

1070 - 1780-1790 on 79w
1080 - 2420-2430 on 91w

on miningpoolhub calculated from 1 day API-logged data (every 30 minutes)
1070 - 1788
1080 - 2427

it's around +1% of what I have with my 1070 through opensource miner.
BTW, xzc got killed with diff rate. No more interesting coin to mine.

I'm not saying that patched djm34's miner better than not patched.
But some peoples have bug with incorrect sharerate on pool.
In ccminer 2.2.2 added "--submit-stale parameter for supernova pool (which change diff too fast)" but in djm34 fork does not.
djm34 fork have highter hashrate than tpruvot's original miner.
I add this param to djm34. That's all.

p.s.
source code
http://www.mediafire.com/file/gsab2cn7o4s417b/ccminer-msvc2015-windows-src.zip

Nope, djm's fork doesn't need the param, it has commented out some stale checking codes, see commit 877b7aa.

What is the hashrate of 1070 Ti?

My resalt after using Apostol's djm32 modified miner.
https://i.imgur.com/CqDRd6S.jpg

The hashrate reported by the miner is greater for me, than the djm34 'normal' miner

3350 khs / TI ( Aorus xtrem edition ), instead of 3200khs

Let's just see now how much the pool gives

The pool reports less than this miner..
I return back to the djm34

What's the best optimized miner for Xzc at the moment?
Is the 2.2.2 better than they djm cuda 9 version?

HI Take your hash over to www.eezyhash.eu - X17 , PHI , Yescrypt with more to follow and earn bitcoins .

Gents, what best msi afterburner settings for gtx 1070 cards?

Zcoin's mining algorithm is mtp now, not lyra2z. I think you can get help on more active threads