Title: [FS] Bracket to mount a DPS2000BB PSU inside a server case - V2 Post by: Spotswood on October 28, 2017, 06:22:24 AM For sale: A mounting bracket for a DPS2000BB server PSU (and a breakout board from http://www.price-technology.com). The bracket leverages the case's 80mm fans for cooling the PSU and mounting the bracket to the case itself. There is ~65mm of vertical height between the motherboard and the bottom of the bracket.
$25 USD. PayPal only. Lead time is 2-3 business days. Shipping from Washington State, US. https://www.spotswoodcomputercases.com/images/servercases/psumount/DPS2000B%20mounting%20bracket.png https://www.spotswoodcomputercases.com/images/servercases/psumount/Attach%20breakout%20board.png https://www.spotswoodcomputercases.com/images/servercases/psumount/Push%20PSU%20and%20backplane%20together.png https://www.spotswoodcomputercases.com/images/servercases/psumount/Front%20tab.png https://www.spotswoodcomputercases.com/images/servercases/psumount/Attach%20bracket%20via%20fans.png https://www.spotswoodcomputercases.com/images/servercases/psumount/Installed.png Title: Re: [FS] Bracket to mount a DPS2000BB PSU inside a server case Post by: MarkAz on November 27, 2017, 07:44:39 PM Just got a chance to install one of these in a new build - works like a charm and SUPER easy to install, probably took all of 5 minutes to install, and it would have been less if I bothered to check your pictures first instead of just figuring it out. Airflow for the PSU is great - about my only real complaint is that on the MB I'm using (the Asus B250 Mining Expert), it's pretty tricky getting the USB riser headers in under there. Luckily I had some right-angle ones and I just used those scattered around a bit. I was also surprised how well just those two screws through the fans are at supporting the whole thing.
Overall a must for anyone using a Rosewill server case and the DPS. Title: Re: [FS] Bracket to mount a DPS2000BB PSU inside a server case Post by: zer0k on December 22, 2017, 03:48:56 PM It doesn't quite look like it from the pictures, but can this be moved far enough over to also use an ATX PSU?
If not, do you think you could offer a set of brackets that let you mount one PSU in the ATX slot, and another like you already have it? Then people running 7-8 X 1080ti setups could get some relief :) Title: Re: [FS] Bracket to mount a DPS2000BB PSU inside a server case Post by: MarkAz on December 22, 2017, 05:40:40 PM It doesn't quite look like it from the pictures, but can this be moved far enough over to also use an ATX PSU? If not, do you think you could offer a set of brackets that let you mount one PSU in the ATX slot, and another like you already have it? Then people running 7-8 X 1080ti setups could get some relief :) I think it would be easier/cheaper to just get a DPS-2500BB (which is what I use with it), which provides 2320w of power, more than enough for 8x 1080 TI's - running that dense with those cards in a 4U will probably result in heat issues. After installing a couple of these, I suspect it would be difficult to do what you ask though, because the DPS encroaches into the PSU area (specifically the power cord which isn't small). Title: Re: [FS] Bracket to mount a DPS2000BB PSU inside a server case Post by: zer0k on December 22, 2017, 05:52:24 PM How many PCIE connectors does the DPS-2500BB board give you?
Do you have a link to one by any chance I can always use a pico PSU setup from one 6-pin port, or even a full SFX PSU for powering the motherboard/cpu/SATA :) Title: Re: [FS] Bracket to mount a DPS2000BB PSU inside a server case Post by: MarkAz on December 22, 2017, 09:24:08 PM How many PCIE connectors does the DPS-2500BB board give you? Do you have a link to one by any chance I can always use a pico PSU setup from one 6-pin port, or even a full SFX PSU for powering the motherboard/cpu/SATA :) It's not a board, it's the PSU - it uses the same breakout as the 2000, it just has 2320w instead of 2000w (no idea why they didn't just call it the DSP-2320BB) - here's an ebay link to one: https://www.ebay.com/itm/IBM-39Y7400-BladeCenter-DPS-2500BB-Power-Supply-Unit-PSU-39Y7405-L80536J/232576990356?hash=item3626ab3c94:g:36MAAOSwywRaHBl7 They pretty much are identical to the 2000 or 1600. On my builds I use a Pico PSU for the motherboard as well and Optimizer's board (which is what this is designed to use) has 15 sockets on it. Using a splitter off of one of the PCIe plugs (assuming you needed 16x) would probably be safer/better than trying to stuff another ATX PSU in the case. ;) I'd keep it simple and just use Spotswood's bracket and a 2500 - it REALLY makes this case much more workable IMO and it's dead simple to install. Title: Re: [FS] Bracket to mount a DPS2000BB PSU inside a server case - V2 Post by: Spotswood on June 01, 2018, 02:01:31 AM I updated the bracket so now its ~15-20mm further above the motherboard (as high as space allows) and mounted closer to the side of the case. I will me fabricating a few of these over the weekend.
https://www.spotswoodcomputercases.com/images/servercases/psumount/DPS2000BB%20v2%20a.png -Rich Title: Re: [FS] Bracket to mount a DPS2000BB PSU inside a server case - V2 Post by: Tupsu on June 01, 2018, 04:03:45 PM I updated the bracket so now its ~15-20mm further above the motherboard (as high as space allows) and mounted closer to the side of the case. I will me fabricating a few of these over the weekend. http://www.spotswoodcomputercases.com/images/servercases/psumount/DPS2000BB%20v2%20a.png -Rich But where the fan is attached ? Title: Re: [FS] Bracket to mount a DPS2000BB PSU inside a server case - V2 Post by: Spotswood on June 01, 2018, 08:48:28 PM I updated the bracket so now its ~15-20mm further above the motherboard (as high as space allows) and mounted closer to the side of the case. I will me fabricating a few of these over the weekend. https://www.spotswoodcomputercases.com/images/servercases/psumount/DPS2000BB%20v2%20a.png -Rich But where the fan is attached ? Title: Re: [FS] Bracket to mount a DPS2000BB PSU inside a server case - V2 Post by: Tupsu on June 01, 2018, 11:56:16 PM But where the fan is attached ? DPS2000BB PSU not working without good air flow. If you want all 2000W , you need a fan next to him. Title: Re: [FS] Bracket to mount a DPS2000BB PSU inside a server case - V2 Post by: Spotswood on June 02, 2018, 02:48:25 AM But where the fan is attached ? DPS2000BB PSU not working without good air flow. If you want all 2000W , you need a fan next to him. The bracket attaches to the case via the two 80mm case fans. Two more 60/80mm fans could be bolted to the beam along the bottom of the bracket. 8) Title: Re: [FS] Bracket to mount a DPS2000BB PSU inside a server case - V2 Post by: WillJ7 on January 11, 2019, 05:25:23 AM But where the fan is attached ? DPS2000BB PSU not working without good air flow. If you want all 2000W , you need a fan next to him. The bracket attaches to the case via the two 80mm case fans. Two more 60/80mm fans could be bolted to the beam along the bottom of the bracket. 8) With the DPS2000B, you want to have as many 80 mm fans to push/pull air through those vented holes as possible. 3 Arctic 80mm fans pushing air from one side, and 2 Arctic 80mm pulling air out from the opposite side seems to work very well. Arctic 80mm 5 packs go on sale every six months or so it seems. The DPS2000BB will shut off quickly without decent add-on fans to cool it. |