|
Title: Can I use the VGA/cpu2 8 pin power supply output to power a 6 pin riser? Post by: lunobird on November 01, 2017, 01:53:37 AM Just like the title says. 2 scared to try it out and fry my riser/gpu
Title: Re: Can I use the VGA/cpu2 8 pin power supply output to power a 6 pin riser? Post by: philipma1957 on November 01, 2017, 02:58:17 AM Yes you can.
Move the two pin out of the way and put in the six pin in the riser. Title: Re: Can I use the VGA/cpu2 8 pin power supply output to power a 6 pin riser? Post by: umine on November 01, 2017, 06:56:01 AM Just like the title says. 2 scared to try it out and fry my riser/gpu Before this you should check pins of your connectors. CPU 8pin and GPU 8pin are different. For supply GPUs from CPU 8pin power connector you need to use proper adapter Title: Re: Can I use the VGA/cpu2 8 pin power supply output to power a 6 pin riser? Post by: Zedmony on November 01, 2017, 07:00:53 AM Just like the title says. 2 scared to try it out and fry my riser/gpu You cannot use the CPU 8pin directly. You have to use an adaptor. Title: Re: Can I use the VGA/cpu2 8 pin power supply output to power a 6 pin riser? Post by: QuintLeo on November 01, 2017, 09:12:26 PM Pinout is NOT THE SAME between an 8-pin CPU connector and an 8-pin PCI-E connector.
If you are careful though, there is a matchup between the 6 pin PCI-E connector and the corresponding 6 pins of a CPU connector - but I advise you to use an adapter unless you know EXACTLY what you are doing. Title: Re: Can I use the VGA/cpu2 8 pin power supply output to power a 6 pin riser? Post by: lunobird on November 01, 2017, 09:29:39 PM Thanks for those warnings, glad I asked and didn't fry something out.
|